)]}'
{"/COMMIT_MSG":[{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":9,"context_line":"This commit adds functionality to perform out-of-band one button"},{"line_number":10,"context_line":"secure erase for iLO5 based HPE Proliant servers. Using this a"},{"line_number":11,"context_line":"user can securely erase the whole system. It includes deleting"},{"line_number":12,"context_line":"any deployment settings profiles, all licenses, AHS and warranty"},{"line_number":13,"context_line":"data stored there, reseting BIOS and erasing supported non-volatile"},{"line_number":14,"context_line":"storage data."},{"line_number":15,"context_line":""}],"source_content_type":"text/x-gerrit-commit-message","patch_set":5,"id":"9f560f44_bb44d348","line":12,"range":{"start_line":12,"start_character":48,"end_line":12,"end_character":51},"updated":"2020-09-03 10:21:53.000000000","message":"s/ AHS / Active Health System (AHS) /","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":9,"context_line":"This commit adds functionality to perform out-of-band one button"},{"line_number":10,"context_line":"secure erase for iLO5 based HPE Proliant servers. Using this a"},{"line_number":11,"context_line":"user can securely erase the whole system. It includes deleting"},{"line_number":12,"context_line":"any deployment settings profiles, all licenses, AHS and warranty"},{"line_number":13,"context_line":"data stored there, reseting BIOS and erasing supported non-volatile"},{"line_number":14,"context_line":"storage data."},{"line_number":15,"context_line":""}],"source_content_type":"text/x-gerrit-commit-message","patch_set":5,"id":"9f560f44_13431615","line":12,"range":{"start_line":12,"start_character":48,"end_line":12,"end_character":51},"in_reply_to":"9f560f44_bb44d348","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"}],"doc/source/admin/drivers/ilo.rst":[{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":2016,"context_line":"as a clean step."},{"line_number":2017,"context_line":""},{"line_number":2018,"context_line":"The One Button Secure Erase resets iLO and deletes all licenses stored there, resets"},{"line_number":2019,"context_line":"BIOS settings, and deletes all AHS and warranty data stored on the system. It also"},{"line_number":2020,"context_line":"erases supported non-volatile storage data and deletes any deployment settings profiles."},{"line_number":2021,"context_line":"See `HPE Gen10 Security Reference Guide`_ for more information. This feature requires"},{"line_number":2022,"context_line":"the node to be configured to ``ilo5`` hardware type and its management interface to be"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_3ba7230e","line":2019,"range":{"start_line":2019,"start_character":31,"end_line":2019,"end_character":34},"updated":"2020-09-03 10:21:53.000000000","message":"s/ AHS / Active Health System (AHS) /","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":2016,"context_line":"as a clean step."},{"line_number":2017,"context_line":""},{"line_number":2018,"context_line":"The One Button Secure Erase resets iLO and deletes all licenses stored there, resets"},{"line_number":2019,"context_line":"BIOS settings, and deletes all AHS and warranty data stored on the system. It also"},{"line_number":2020,"context_line":"erases supported non-volatile storage data and deletes any deployment settings profiles."},{"line_number":2021,"context_line":"See `HPE Gen10 Security Reference Guide`_ for more information. This feature requires"},{"line_number":2022,"context_line":"the node to be configured to ``ilo5`` hardware type and its management interface to be"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_1372f6ad","line":2019,"range":{"start_line":2019,"start_character":31,"end_line":2019,"end_character":34},"in_reply_to":"9f560f44_3ba7230e","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":2018,"context_line":"The One Button Secure Erase resets iLO and deletes all licenses stored there, resets"},{"line_number":2019,"context_line":"BIOS settings, and deletes all AHS and warranty data stored on the system. It also"},{"line_number":2020,"context_line":"erases supported non-volatile storage data and deletes any deployment settings profiles."},{"line_number":2021,"context_line":"See `HPE Gen10 Security Reference Guide`_ for more information. This feature requires"},{"line_number":2022,"context_line":"the node to be configured to ``ilo5`` hardware type and its management interface to be"},{"line_number":2023,"context_line":"``ilo5``."},{"line_number":2024,"context_line":""},{"line_number":2025,"context_line":"Below are the steps to perform this clean step:"},{"line_number":2026,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_1bd17f58","line":2023,"range":{"start_line":2021,"start_character":64,"end_line":2023,"end_character":9},"updated":"2020-09-03 10:21:53.000000000","message":"s/ This feature requires the node to be configured to ``ilo5`` hardware type and its management interface to be\n``ilo5``. //","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":2018,"context_line":"The One Button Secure Erase resets iLO and deletes all licenses stored there, resets"},{"line_number":2019,"context_line":"BIOS settings, and deletes all AHS and warranty data stored on the system. It also"},{"line_number":2020,"context_line":"erases supported non-volatile storage data and deletes any deployment settings profiles."},{"line_number":2021,"context_line":"See `HPE Gen10 Security Reference Guide`_ for more information. This feature requires"},{"line_number":2022,"context_line":"the node to be configured to ``ilo5`` hardware type and its management interface to be"},{"line_number":2023,"context_line":"``ilo5``."},{"line_number":2024,"context_line":""},{"line_number":2025,"context_line":"Below are the steps to perform this clean step:"},{"line_number":2026,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_5363cedd","line":2023,"range":{"start_line":2021,"start_character":64,"end_line":2023,"end_character":9},"in_reply_to":"9f560f44_1bd17f58","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":2032,"context_line":"        \u0027[{\"interface\": \"management\", \"step\": \"one_button_secure_erase\"}]\u0027"},{"line_number":2033,"context_line":""},{"line_number":2034,"context_line":"* Once the clean step would triggered and node go to \u0027clean wait\u0027 state and"},{"line_number":2035,"context_line":"  maintenance will be \u0027True\u0027, then delete the node"},{"line_number":2036,"context_line":""},{"line_number":2037,"context_line":".. code-block:: console"},{"line_number":2038,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_3b5c43ec","line":2035,"range":{"start_line":2035,"start_character":2,"end_line":2035,"end_character":22},"updated":"2020-09-03 10:21:53.000000000","message":"s/ maintenance will be / ``maintenance`` flag on node would be set to /","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":2032,"context_line":"        \u0027[{\"interface\": \"management\", \"step\": \"one_button_secure_erase\"}]\u0027"},{"line_number":2033,"context_line":""},{"line_number":2034,"context_line":"* Once the clean step would triggered and node go to \u0027clean wait\u0027 state and"},{"line_number":2035,"context_line":"  maintenance will be \u0027True\u0027, then delete the node"},{"line_number":2036,"context_line":""},{"line_number":2037,"context_line":".. code-block:: console"},{"line_number":2038,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_f39942d0","line":2035,"range":{"start_line":2035,"start_character":2,"end_line":2035,"end_character":22},"in_reply_to":"9f560f44_3b5c43ec","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":2038,"context_line":""},{"line_number":2039,"context_line":"    openstack baremetal node delete test_node"},{"line_number":2040,"context_line":""},{"line_number":2041,"context_line":".. note::"},{"line_number":2042,"context_line":"   One Button Secure Erase should be used with extreme caution, and only when"},{"line_number":2043,"context_line":"   a system is being decommissioned. After the erase would complete user will"},{"line_number":2044,"context_line":"   lose iLO network access, which needs to be regained by the administrator."}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_bb15f3e7","line":2041,"range":{"start_line":2041,"start_character":0,"end_line":2041,"end_character":9},"updated":"2020-09-03 10:21:53.000000000","message":"Also add a note that:-\n1. Even after deleting the node, one button secure erase operation would continue on the node.\n2. This clean step should be kept last if the multiple clean steps are to executed. No clean step after this step would be executed.","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":2038,"context_line":""},{"line_number":2039,"context_line":"    openstack baremetal node delete test_node"},{"line_number":2040,"context_line":""},{"line_number":2041,"context_line":".. note::"},{"line_number":2042,"context_line":"   One Button Secure Erase should be used with extreme caution, and only when"},{"line_number":2043,"context_line":"   a system is being decommissioned. After the erase would complete user will"},{"line_number":2044,"context_line":"   lose iLO network access, which needs to be regained by the administrator."}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_13803646","line":2041,"range":{"start_line":2041,"start_character":0,"end_line":2041,"end_character":9},"in_reply_to":"9f560f44_bb15f3e7","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":2040,"context_line":""},{"line_number":2041,"context_line":".. note::"},{"line_number":2042,"context_line":"   One Button Secure Erase should be used with extreme caution, and only when"},{"line_number":2043,"context_line":"   a system is being decommissioned. After the erase would complete user will"},{"line_number":2044,"context_line":"   lose iLO network access, which needs to be regained by the administrator."},{"line_number":2045,"context_line":"   The process can take up to a day or two to fully erase and reset all user data."},{"line_number":2046,"context_line":"   When you activate One Button Secure Erase, iLO 5 does not allow firmware update"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_bbea13d5","line":2043,"range":{"start_line":2043,"start_character":37,"end_line":2043,"end_character":67},"updated":"2020-09-03 10:21:53.000000000","message":"Is it \"after\" or while erase operation in progress?\nAlso the admin credentials would be lost.","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":2040,"context_line":""},{"line_number":2041,"context_line":".. note::"},{"line_number":2042,"context_line":"   One Button Secure Erase should be used with extreme caution, and only when"},{"line_number":2043,"context_line":"   a system is being decommissioned. After the erase would complete user will"},{"line_number":2044,"context_line":"   lose iLO network access, which needs to be regained by the administrator."},{"line_number":2045,"context_line":"   The process can take up to a day or two to fully erase and reset all user data."},{"line_number":2046,"context_line":"   When you activate One Button Secure Erase, iLO 5 does not allow firmware update"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9f560f44_7396d296","line":2043,"range":{"start_line":2043,"start_character":37,"end_line":2043,"end_character":67},"in_reply_to":"9f560f44_bbea13d5","updated":"2020-09-04 05:28:09.000000000","message":"during the erase process network will keep disconnecting, and after, it will be completely. I just added those.","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":2027,"context_line":""},{"line_number":2028,"context_line":".. code-block:: console"},{"line_number":2029,"context_line":""},{"line_number":2030,"context_line":"    openstack baremetal node clean test_node --clean-steps\\"},{"line_number":2031,"context_line":"        \u0027[{\"interface\": \"management\", \"step\": \"one_button_secure_erase\"}]\u0027"},{"line_number":2032,"context_line":""},{"line_number":2033,"context_line":"* Once the clean step would triggered and node go to \u0027clean wait\u0027 state and"}],"source_content_type":"text/x-rst","patch_set":6,"id":"9f560f44_a10922de","line":2030,"range":{"start_line":2030,"start_character":35,"end_line":2030,"end_character":44},"updated":"2020-09-06 08:57:56.000000000","message":"nit: Better to name it as a variable as done else where. \ns/ test_node / $node_ident /","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":2035,"context_line":""},{"line_number":2036,"context_line":".. code-block:: console"},{"line_number":2037,"context_line":""},{"line_number":2038,"context_line":"    openstack baremetal node delete test_node"},{"line_number":2039,"context_line":""},{"line_number":2040,"context_line":".. note::"},{"line_number":2041,"context_line":"   * Even after deleting the node, One Button Secure Erase operation would continue"}],"source_content_type":"text/x-rst","patch_set":6,"id":"9f560f44_010baed4","line":2038,"range":{"start_line":2038,"start_character":36,"end_line":2038,"end_character":45},"updated":"2020-09-06 08:57:56.000000000","message":"ditto","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":2046,"context_line":""},{"line_number":2047,"context_line":"   * One Button Secure Erase should be used with extreme caution, and only when a system"},{"line_number":2048,"context_line":"     is being decommissioned. During the erase the iLO network would keep disconnecting"},{"line_number":2049,"context_line":"     and after the erase user will completly lose iLO access along with the credentials"},{"line_number":2050,"context_line":"     of the server, which needs to be regained by the administrator. The process can take"},{"line_number":2051,"context_line":"     up to a day or two to fully erase and reset all user data."},{"line_number":2052,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"9f560f44_41f806c3","line":2049,"range":{"start_line":2049,"start_character":35,"end_line":2049,"end_character":44},"updated":"2020-09-06 08:57:56.000000000","message":"s/ completly / completely /","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"}],"ironic/drivers/modules/ilo/management.py":[{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":941,"context_line":"        The One-button secure erase process resets iLO and deletes all licenses"},{"line_number":942,"context_line":"        stored there, resets BIOS settings, and deletes all Active Health"},{"line_number":943,"context_line":"        System (AHS) and warranty data stored on the system. It also erases"},{"line_number":944,"context_line":"        supported non-volatile storage data and deletes any deployment settings"},{"line_number":945,"context_line":"        profiles."},{"line_number":946,"context_line":""},{"line_number":947,"context_line":"        :param task: a TaskManager instance."}],"source_content_type":"text/x-python","patch_set":6,"id":"9f560f44_21f512cc","line":944,"range":{"start_line":944,"start_character":71,"end_line":944,"end_character":79},"updated":"2020-09-06 08:57:56.000000000","message":"nit: s/ settings / setting /","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11655,"name":"Julia Kreger","email":"juliaashleykreger@gmail.com","username":"jkreger","status":"Flying to the moon with a Jetpack!"},"change_message_id":"745c21321c24948bc4a0d729595f16c872da3a15","unresolved":false,"context_lines":[{"line_number":954,"context_line":"            ilo_object \u003d ilo_common.get_ilo_object(node)"},{"line_number":955,"context_line":"            ilo_object.do_one_button_secure_erase()"},{"line_number":956,"context_line":"            manager_utils.node_power_action(task, states.REBOOT)"},{"line_number":957,"context_line":"            node.maintenance \u003d True"},{"line_number":958,"context_line":"            node.maintenance_reason \u003d ("},{"line_number":959,"context_line":"                \"Running one button secure erase clean step.\")"},{"line_number":960,"context_line":"            node.save()"}],"source_content_type":"text/x-python","patch_set":6,"id":"9f560f44_7b1df7bc","line":957,"updated":"2020-09-05 15:57:00.000000000","message":"May also be good to set the retirement field if not already set, although maybe not....","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":954,"context_line":"            ilo_object \u003d ilo_common.get_ilo_object(node)"},{"line_number":955,"context_line":"            ilo_object.do_one_button_secure_erase()"},{"line_number":956,"context_line":"            manager_utils.node_power_action(task, states.REBOOT)"},{"line_number":957,"context_line":"            node.maintenance \u003d True"},{"line_number":958,"context_line":"            node.maintenance_reason \u003d ("},{"line_number":959,"context_line":"                \"Running one button secure erase clean step.\")"},{"line_number":960,"context_line":"            node.save()"}],"source_content_type":"text/x-python","patch_set":6,"id":"9f560f44_a16482ba","line":957,"in_reply_to":"9f560f44_7b1df7bc","updated":"2020-09-06 08:57:56.000000000","message":"I think it would be better to explicitly set the retirement field as one would not be able to use the node once this operation is complete without manually re-configuring the node.","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11655,"name":"Julia Kreger","email":"juliaashleykreger@gmail.com","username":"jkreger","status":"Flying to the moon with a Jetpack!"},"change_message_id":"745c21321c24948bc4a0d729595f16c872da3a15","unresolved":false,"context_lines":[{"line_number":956,"context_line":"            manager_utils.node_power_action(task, states.REBOOT)"},{"line_number":957,"context_line":"            node.maintenance \u003d True"},{"line_number":958,"context_line":"            node.maintenance_reason \u003d ("},{"line_number":959,"context_line":"                \"Running one button secure erase clean step.\")"},{"line_number":960,"context_line":"            node.save()"},{"line_number":961,"context_line":"            return states.CLEANWAIT"},{"line_number":962,"context_line":"        except ilo_error.IloError as ilo_exception:"}],"source_content_type":"text/x-python","patch_set":6,"id":"9f560f44_1b24bb0c","line":959,"updated":"2020-09-05 15:57:00.000000000","message":"Might be good to elaborate on this...","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"},{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"14a77f91bbc24c94796b42e5539120ad355a6b92","unresolved":false,"context_lines":[{"line_number":956,"context_line":"            manager_utils.node_power_action(task, states.REBOOT)"},{"line_number":957,"context_line":"            node.maintenance \u003d True"},{"line_number":958,"context_line":"            node.maintenance_reason \u003d ("},{"line_number":959,"context_line":"                \"Running one button secure erase clean step.\")"},{"line_number":960,"context_line":"            node.save()"},{"line_number":961,"context_line":"            return states.CLEANWAIT"},{"line_number":962,"context_line":"        except ilo_error.IloError as ilo_exception:"}],"source_content_type":"text/x-python","patch_set":6,"id":"9f560f44_01560ecf","line":959,"in_reply_to":"9f560f44_1b24bb0c","updated":"2020-09-06 08:57:56.000000000","message":"+1","commit_id":"9fb4074bfef7b6e4ead7d3cedf7120668966eaa1"}],"releasenotes/notes/ilo5-oob-one-button-secure-erase-f55628f8aa767c20.yaml":[{"author":{"_account_id":11076,"name":"Shivanand Tendulker","email":"stendulker@gmail.com","username":"stendulker"},"change_message_id":"9b587d503dfede41648abd7210764bb799dcf1a2","unresolved":false,"context_lines":[{"line_number":1,"context_line":"---"},{"line_number":2,"context_line":"features:"},{"line_number":3,"context_line":"  - Adds functionality to perform out-of-band one button secure erase"},{"line_number":4,"context_line":"    operation for iLO5 based HPE Proliant servers."},{"line_number":5,"context_line":"upgrade:"},{"line_number":6,"context_line":"  - The ``do_one_button_secure_erase`` interface of \u0027proliantutils\u0027 library has"},{"line_number":7,"context_line":"    been enhanced to support out-of-band one button secure erase operation for"}],"source_content_type":"text/x-yaml","patch_set":5,"id":"9f560f44_9bcf4f56","line":4,"range":{"start_line":4,"start_character":42,"end_line":4,"end_character":49},"updated":"2020-09-03 10:21:53.000000000","message":"s/ servers / servers as a ``management`` clean step ``one_button_secure_erase`` for ``ilo5`` hardware type. /","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"},{"author":{"_account_id":22271,"name":"paresh","email":"paresh.sao@hpe.com","username":"kesper"},"change_message_id":"fb0a01eba0a9384cc65226d89b5bded9b280acc5","unresolved":false,"context_lines":[{"line_number":1,"context_line":"---"},{"line_number":2,"context_line":"features:"},{"line_number":3,"context_line":"  - Adds functionality to perform out-of-band one button secure erase"},{"line_number":4,"context_line":"    operation for iLO5 based HPE Proliant servers."},{"line_number":5,"context_line":"upgrade:"},{"line_number":6,"context_line":"  - The ``do_one_button_secure_erase`` interface of \u0027proliantutils\u0027 library has"},{"line_number":7,"context_line":"    been enhanced to support out-of-band one button secure erase operation for"}],"source_content_type":"text/x-yaml","patch_set":5,"id":"9f560f44_f3d02256","line":4,"range":{"start_line":4,"start_character":42,"end_line":4,"end_character":49},"in_reply_to":"9f560f44_9bcf4f56","updated":"2020-09-04 05:28:09.000000000","message":"Done","commit_id":"2306dc85d20f88b70257317ec4437f0e638862d1"}]}