)]}'
{"doc/source/admin/config-qos.rst":[{"author":{"_account_id":8313,"name":"Lajos Katona","display_name":"lajoskatona","email":"katonalala@gmail.com","username":"elajkat","status":"Ericsson Software Technology"},"change_message_id":"c805c2b89f45669e44fbaa401cedb5a147a800b7","unresolved":false,"context_lines":[{"line_number":302,"context_line":"   limit setting. This issue is discussed in various documentation sources, for"},{"line_number":303,"context_line":"   example in `Juniper\u0027s documentation"},{"line_number":304,"context_line":"   \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":305,"context_line":"   Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":306,"context_line":"   value. For example, if the bandwidth limit is set to 1000kbps then enough"},{"line_number":307,"context_line":"   burst value will be 800kbit. If the configured burst value is too low,"},{"line_number":308,"context_line":"   achieved bandwidth limit will be lower than expected. If the configured burst"}],"source_content_type":"text/x-rst","patch_set":1,"id":"3f79a3b5_410bc8d4","line":305,"range":{"start_line":305,"start_character":31,"end_line":305,"end_character":48},"updated":"2018-08-14 12:56:49.000000000","message":"just a nit: I would emphasise that 80% is suggested for tcp, like:\n\"Burst value for TCP traffic is suggested to be 80% of....\"","commit_id":"13096597ae830a14eb173753f84b9a9c9831538e"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"8226c04cc88c56661917116e2b9e5fbb0c97b841","unresolved":false,"context_lines":[{"line_number":302,"context_line":"   limit setting. This issue is discussed in various documentation sources, for"},{"line_number":303,"context_line":"   example in `Juniper\u0027s documentation"},{"line_number":304,"context_line":"   \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":305,"context_line":"   Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":306,"context_line":"   value. For example, if the bandwidth limit is set to 1000kbps then enough"},{"line_number":307,"context_line":"   burst value will be 800kbit. If the configured burst value is too low,"},{"line_number":308,"context_line":"   achieved bandwidth limit will be lower than expected. If the configured burst"}],"source_content_type":"text/x-rst","patch_set":1,"id":"3f79a3b5_5dc93623","line":305,"range":{"start_line":305,"start_character":31,"end_line":305,"end_character":48},"in_reply_to":"3f79a3b5_410bc8d4","updated":"2018-08-16 12:45:09.000000000","message":"I rephrased it a bit. Let me know if I should change it still :)","commit_id":"13096597ae830a14eb173753f84b9a9c9831538e"},{"author":{"_account_id":1131,"name":"Brian Haley","email":"haleyb.dev@gmail.com","username":"brian-haley"},"change_message_id":"a7fa37a0920ace9deb407a2c63aa75c361fd8985","unresolved":false,"context_lines":[{"line_number":299,"context_line":"   bandwidth limit rules in the Open vSwitch and Linux bridge agents."},{"line_number":300,"context_line":"   Configuring the proper burst value is very important. If the burst value is"},{"line_number":301,"context_line":"   set too low, bandwidth usage will be throttled even with a proper bandwidth"},{"line_number":302,"context_line":"   limit setting. This issue is discussed in various documentation sources, for"},{"line_number":303,"context_line":"   example in `Juniper\u0027s documentation"},{"line_number":304,"context_line":"   \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":305,"context_line":"   For TCP traffic it is recommended to set burst value as 80% of desired bandwidth"},{"line_number":306,"context_line":"   limit value. For example, if the bandwidth limit is set to 1000kbps then enough"},{"line_number":307,"context_line":"   burst value will be 800kbit. If the configured burst value is too low,"}],"source_content_type":"text/x-rst","patch_set":2,"id":"3f79a3b5_79cc9434","line":304,"range":{"start_line":302,"start_character":18,"end_line":304,"end_character":121},"updated":"2018-08-23 20:26:25.000000000","message":"my only comment about putting a hyperlink to an external site here is it will eventually be out of date.","commit_id":"1a26bb4764ce5c86bc524ea57f0d0d2e55d68f5f"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"9f8a15356f780587c93266bc0c4eaff2877666f3","unresolved":false,"context_lines":[{"line_number":299,"context_line":"   bandwidth limit rules in the Open vSwitch and Linux bridge agents."},{"line_number":300,"context_line":"   Configuring the proper burst value is very important. If the burst value is"},{"line_number":301,"context_line":"   set too low, bandwidth usage will be throttled even with a proper bandwidth"},{"line_number":302,"context_line":"   limit setting. This issue is discussed in various documentation sources, for"},{"line_number":303,"context_line":"   example in `Juniper\u0027s documentation"},{"line_number":304,"context_line":"   \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":305,"context_line":"   For TCP traffic it is recommended to set burst value as 80% of desired bandwidth"},{"line_number":306,"context_line":"   limit value. For example, if the bandwidth limit is set to 1000kbps then enough"},{"line_number":307,"context_line":"   burst value will be 800kbit. If the configured burst value is too low,"}],"source_content_type":"text/x-rst","patch_set":2,"id":"3f79a3b5_d2b50880","line":304,"range":{"start_line":302,"start_character":18,"end_line":304,"end_character":121},"in_reply_to":"3f79a3b5_79cc9434","updated":"2018-08-29 20:46:52.000000000","message":"I think that it is quite nice explained there and in fact it was like that before also. I just moved it to another place in the document now :)","commit_id":"1a26bb4764ce5c86bc524ea57f0d0d2e55d68f5f"}]}