)]}'
{"doc/config-ref-rst/source/block-storage/drivers/emc-vnx-driver.rst":[{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":11,"context_line":"executing Navisphere CLI (NaviSecCLI) which is a command line interface used"},{"line_number":12,"context_line":"for management, diagnostics, and reporting functions for VNX."},{"line_number":13,"context_line":""},{"line_number":14,"context_line":"System requirement"},{"line_number":15,"context_line":"~~~~~~~~~~~~~~~~~~~"},{"line_number":16,"context_line":""},{"line_number":17,"context_line":"-  VNX Operational Environment for Block version 5.32 or higher."}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_2950ebd3","line":14,"updated":"2015-12-10 17:48:43.000000000","message":"change to System requirements","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":66,"context_line":""},{"line_number":67,"context_line":"   .. code-block:: console"},{"line_number":68,"context_line":""},{"line_number":69,"context_line":"       $ /opt/Navisphere/bin/naviseccli security -certificate -setLevel low"},{"line_number":70,"context_line":""},{"line_number":71,"context_line":"Check array software"},{"line_number":72,"context_line":"--------------------"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_297c6bb4","line":69,"updated":"2015-12-10 17:48:43.000000000","message":"remove a one bit space before $","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":92,"context_line":"You can check the status of your array software in the :guilabel:`Software`"},{"line_number":93,"context_line":"page of :guilabel:`\"Storage System Properties`. Here is how it looks like:"},{"line_number":94,"context_line":""},{"line_number":95,"context_line":".. figure:: ../../figures/emc-enabler.png"},{"line_number":96,"context_line":""},{"line_number":97,"context_line":"Network configuration"},{"line_number":98,"context_line":"---------------------"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_7b68faba","line":95,"updated":"2015-12-10 17:48:43.000000000","message":"Here missed to add \"Install EMC VNX driver\" paragraph","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":284,"context_line":""},{"line_number":285,"context_line":".. note::"},{"line_number":286,"context_line":""},{"line_number":287,"context_line":"    -  Rather than de-registered, the registered ports will be simply"},{"line_number":288,"context_line":"       bypassed whatever they are in ``io_port_list`` or not."},{"line_number":289,"context_line":""},{"line_number":290,"context_line":"    -  The driver will raise an exception if ports in ``io_port_list``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_3baa721a","line":287,"updated":"2015-12-10 17:48:43.000000000","message":"start the line under \u0027n\u0027","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":323,"context_line":"Storage group automatic deletion"},{"line_number":324,"context_line":"--------------------------------"},{"line_number":325,"context_line":""},{"line_number":326,"context_line":""},{"line_number":327,"context_line":"For volume attaching, the driver has a storage group on VNX for each compute"},{"line_number":328,"context_line":"node hosting the vm instances which are going to consume VNX Block Storage"},{"line_number":329,"context_line":"(using compute node\u0027s hostname as storage group\u0027s name).  All the volumes"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_9b59265e","line":326,"updated":"2015-12-10 17:48:43.000000000","message":"deduct one line space","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":343,"context_line":""},{"line_number":344,"context_line":"FC SAN auto zoning"},{"line_number":345,"context_line":"------------------"},{"line_number":346,"context_line":""},{"line_number":347,"context_line":""},{"line_number":348,"context_line":"The EMC VNX FC driver supports FC SAN auto zoning when ZoneManager is"},{"line_number":349,"context_line":"configured. Set ``zoning_mode`` to ``fabric`` in the ``[DEFAULT]`` section to"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_1e29a489","line":346,"updated":"2015-12-10 17:48:43.000000000","message":"deduct a line space","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":429,"context_line":""},{"line_number":430,"context_line":".. code-block:: console"},{"line_number":431,"context_line":""},{"line_number":432,"context_line":"    $ cinder type-create \"demoVolumeType\""},{"line_number":433,"context_line":""},{"line_number":434,"context_line":"Use following command to update the extra spec of a volume type:"},{"line_number":435,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_3e6ca09b","line":432,"updated":"2015-12-10 17:48:43.000000000","message":"delete a bit space at the beginning","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":435,"context_line":""},{"line_number":436,"context_line":".. code-block:: console"},{"line_number":437,"context_line":""},{"line_number":438,"context_line":"    $ cinder type-key \"demoVolumeType\" set provisioning:type\u003dthin"},{"line_number":439,"context_line":""},{"line_number":440,"context_line":"The following sections describe the VNX extra keys."},{"line_number":441,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_be25f05c","line":438,"updated":"2015-12-10 17:48:43.000000000","message":"ditto","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":449,"context_line":"   -  ``thick``"},{"line_number":450,"context_line":""},{"line_number":451,"context_line":"      Volume is fully provisioned."},{"line_number":452,"context_line":""},{"line_number":453,"context_line":"      .. code-block:: console"},{"line_number":454,"context_line":""},{"line_number":455,"context_line":"          $ cinder type-create \"ThickVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_9e9ef452","line":452,"updated":"2015-12-10 17:48:43.000000000","message":"Add **creating a ``thick`` volume type**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":7923,"name":"Gauvain Pocentek","email":"gauvainpocentek@gmail.com","username":"gpocentek"},"change_message_id":"7ea5ffd9ec59252e9962bfb62df0cbc8608e4a6f","unresolved":false,"context_lines":[{"line_number":449,"context_line":"   -  ``thick``"},{"line_number":450,"context_line":""},{"line_number":451,"context_line":"      Volume is fully provisioned."},{"line_number":452,"context_line":""},{"line_number":453,"context_line":"      .. code-block:: console"},{"line_number":454,"context_line":""},{"line_number":455,"context_line":"          $ cinder type-create \"ThickVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_0a1cf7bf","line":452,"in_reply_to":"7a740942_604b5d2c","updated":"2015-12-10 19:24:40.000000000","message":"Sorry, I misunderstood what you meant. Will fix!","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":7923,"name":"Gauvain Pocentek","email":"gauvainpocentek@gmail.com","username":"gpocentek"},"change_message_id":"1a38be4118fc60fc672f7ff98394c9806f5b96e7","unresolved":false,"context_lines":[{"line_number":449,"context_line":"   -  ``thick``"},{"line_number":450,"context_line":""},{"line_number":451,"context_line":"      Volume is fully provisioned."},{"line_number":452,"context_line":""},{"line_number":453,"context_line":"      .. code-block:: console"},{"line_number":454,"context_line":""},{"line_number":455,"context_line":"          $ cinder type-create \"ThickVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_604b5d2c","line":452,"in_reply_to":"7a740942_9e9ef452","updated":"2015-12-10 18:53:32.000000000","message":"Why? This is a list of possible values.","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":452,"context_line":""},{"line_number":453,"context_line":"      .. code-block:: console"},{"line_number":454,"context_line":""},{"line_number":455,"context_line":"          $ cinder type-create \"ThickVolumeType\""},{"line_number":456,"context_line":"          $ cinder type-key \"ThickVolumeType\" set provisioning:type\u003dthick thick_provisioning_support\u003d\u0027\u003cis\u003e True\u0027"},{"line_number":457,"context_line":""},{"line_number":458,"context_line":"   -  ``thin``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_5ec3ac57","line":455,"updated":"2015-12-10 17:48:43.000000000","message":"delete a bit space at the beginning","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":458,"context_line":"   -  ``thin``"},{"line_number":459,"context_line":""},{"line_number":460,"context_line":"      Volume is virtually provisioned."},{"line_number":461,"context_line":""},{"line_number":462,"context_line":"      .. code-block:: console"},{"line_number":463,"context_line":""},{"line_number":464,"context_line":"          $ cinder type-create \"ThinVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_3edb401d","line":461,"updated":"2015-12-10 17:48:43.000000000","message":"Add here **Creating a ``thin`` volume type**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":471,"context_line":"      create a deduplicated volume, the VNX Deduplication license must be"},{"line_number":472,"context_line":"      activated on VNX, and specify ``deduplication_support\u003dTrue`` to let Block"},{"line_number":473,"context_line":"      Storage scheduler find the proper volume back end."},{"line_number":474,"context_line":""},{"line_number":475,"context_line":"      .. code-block:: console "},{"line_number":476,"context_line":""},{"line_number":477,"context_line":"          $ cinder type-create \"DeduplicatedVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_5e440cb6","line":474,"updated":"2015-12-10 17:48:43.000000000","message":"Add **Creating a ``dedupliacted`` volume type**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":485,"context_line":"      , and use ``compression_support\u003dTrue`` to let Block Storage scheduler"},{"line_number":486,"context_line":"      find a volume back end. VNX does not support creating snapshots on a"},{"line_number":487,"context_line":"      compressed volume."},{"line_number":488,"context_line":""},{"line_number":489,"context_line":"      .. code-block:: console"},{"line_number":490,"context_line":""},{"line_number":491,"context_line":"         $ cinder type-create \"CompressedVolumeType\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_de5c7c7f","line":488,"updated":"2015-12-10 17:48:43.000000000","message":"Add **Creating a ``compressed`` volume type**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":526,"context_line":"``fast_support\u003d\u0027\u003cis\u003e True\u0027`` to let Block Storage scheduler find a volume back"},{"line_number":527,"context_line":"end which manages a VNX with FAST license activated. Here are the five"},{"line_number":528,"context_line":"supported values for the extra spec key ``storagetype:tiering``:"},{"line_number":529,"context_line":""},{"line_number":530,"context_line":".. code-block:: console"},{"line_number":531,"context_line":""},{"line_number":532,"context_line":"    $ cinder type-create \"ThinVolumeOnLowestAvaibleTier\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_be9e5005","line":529,"updated":"2015-12-10 17:48:43.000000000","message":"Add **Creating a volume types with ``tiering`` policy**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":622,"context_line":"that manages multiple pools, a volume type with a extra spec specified storage"},{"line_number":623,"context_line":"pool should be created first, then the user can use this volume type to create"},{"line_number":624,"context_line":"the volume."},{"line_number":625,"context_line":""},{"line_number":626,"context_line":".. code-block:: console"},{"line_number":627,"context_line":""},{"line_number":628,"context_line":"    $ cinder type-create \"HighPerf\""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_de6f9cfa","line":625,"updated":"2015-12-10 17:48:43.000000000","message":"Add **Creating the volume type**","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":678,"context_line":"   installation steps. For Red Hat based distributions, they should be"},{"line_number":679,"context_line":"   ``device-mapper-multipath``, ``sysfsutils`` and ``sg3_utils``."},{"line_number":680,"context_line":""},{"line_number":681,"context_line":"#. Specify ``use_multipath_for_image_xfer\u003dtrue`` in cinder.conf for each"},{"line_number":682,"context_line":"   FC/iSCSI back end."},{"line_number":683,"context_line":""},{"line_number":684,"context_line":"#. Specify ``iscsi_use_multipath\u003dTrue`` in ``libvirt`` section of"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_b108c129","line":681,"updated":"2015-12-10 17:48:43.000000000","message":"``cinder.conf``","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":821,"context_line":"credentials which can get rid of providing the plain text credentials in the"},{"line_number":822,"context_line":"configuration file. Following is the instruction on how to do this."},{"line_number":823,"context_line":""},{"line_number":824,"context_line":"#. Find out the Linux user id of the cinder-volume processes. Assuming the"},{"line_number":825,"context_line":"   service cinder-volume is running by the account ``cinder``."},{"line_number":826,"context_line":""},{"line_number":827,"context_line":"#. Run ``su`` as root user."}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_b1c9a1ae","line":824,"updated":"2015-12-10 17:48:43.000000000","message":"``cinder-volume``","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":822,"context_line":"configuration file. Following is the instruction on how to do this."},{"line_number":823,"context_line":""},{"line_number":824,"context_line":"#. Find out the Linux user id of the cinder-volume processes. Assuming the"},{"line_number":825,"context_line":"   service cinder-volume is running by the account ``cinder``."},{"line_number":826,"context_line":""},{"line_number":827,"context_line":"#. Run ``su`` as root user."},{"line_number":828,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_d1430d12","line":825,"updated":"2015-12-10 17:48:43.000000000","message":"``cinder-volume``","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":832,"context_line":""},{"line_number":833,"context_line":"#. Save the credentials on behalf of ``cinder`` user to a security file"},{"line_number":834,"context_line":"   (assuming the array credentials are ``admin/admin`` in ``global`` scope). In"},{"line_number":835,"context_line":"   the command below, the \u0027-secfilepath\u0027 switch is used to specify the location"},{"line_number":836,"context_line":"   to save the security file."},{"line_number":837,"context_line":""},{"line_number":838,"context_line":"   .. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_f10409c7","line":835,"updated":"2015-12-10 17:48:43.000000000","message":"change \u0027-secfilepath\u0027 to ``-secfilepath``","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":863,"context_line":"initiator auto registration is not enabled."},{"line_number":864,"context_line":""},{"line_number":865,"context_line":"To perform \"Copy Image to Volume\" and \"Copy Volume to Image\" operations, the"},{"line_number":866,"context_line":"nodes running the cinder-volume service (Block Storage nodes) must be"},{"line_number":867,"context_line":"registered with the VNX as well."},{"line_number":868,"context_line":""},{"line_number":869,"context_line":"The steps mentioned below are for the compute nodes. Follow the same"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_7195793e","line":866,"updated":"2015-12-10 17:48:43.000000000","message":"``cinder-volume``","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":875,"context_line":"and ``10.10.61.1``. Register"},{"line_number":876,"context_line":"``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` in Unisphere:"},{"line_number":877,"context_line":""},{"line_number":878,"context_line":"#. Login to Unisphere, go to FNM0000000000-\u003eHosts-\u003eInitiators."},{"line_number":879,"context_line":""},{"line_number":880,"context_line":"#. Refresh and wait until the initiator"},{"line_number":881,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` with SP Port ``A-1``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_91c5853e","line":878,"updated":"2015-12-10 17:48:43.000000000","message":":guilabel:`FNM......`-\u003e:guilabel:`Hosts`-\u003e:guilabel:`Initiators`","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":7923,"name":"Gauvain Pocentek","email":"gauvainpocentek@gmail.com","username":"gpocentek"},"change_message_id":"1a38be4118fc60fc672f7ff98394c9806f5b96e7","unresolved":false,"context_lines":[{"line_number":875,"context_line":"and ``10.10.61.1``. Register"},{"line_number":876,"context_line":"``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` in Unisphere:"},{"line_number":877,"context_line":""},{"line_number":878,"context_line":"#. Login to Unisphere, go to FNM0000000000-\u003eHosts-\u003eInitiators."},{"line_number":879,"context_line":""},{"line_number":880,"context_line":"#. Refresh and wait until the initiator"},{"line_number":881,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` with SP Port ``A-1``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_a05705c9","line":878,"in_reply_to":"7a740942_91c5853e","updated":"2015-12-10 18:53:32.000000000","message":"This is the kind of change I\u0027d rather do in another patch.","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":881,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` with SP Port ``A-1``"},{"line_number":882,"context_line":"   appears."},{"line_number":883,"context_line":""},{"line_number":884,"context_line":"#. Click the Register button, select CLARiiON/VNX and enter the hostname (which"},{"line_number":885,"context_line":"   is the output of the :command:`hostname` command) and IP address:"},{"line_number":886,"context_line":""},{"line_number":887,"context_line":"   -  Hostname: ``myhost1``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_31db711d","line":884,"updated":"2015-12-10 17:48:43.000000000","message":":guilabel:`Register` button, select :guilabel:`CL.........`","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":888,"context_line":""},{"line_number":889,"context_line":"   -  IP: ``10.10.61.1``"},{"line_number":890,"context_line":""},{"line_number":891,"context_line":"   -  Click Register."},{"line_number":892,"context_line":""},{"line_number":893,"context_line":"#. Then host ``10.10.61.1`` will appear under Hosts-\u003eHost List as well."},{"line_number":894,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_b19e8105","line":891,"updated":"2015-12-10 17:48:43.000000000","message":":guilabel:`Register`","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":890,"context_line":""},{"line_number":891,"context_line":"   -  Click Register."},{"line_number":892,"context_line":""},{"line_number":893,"context_line":"#. Then host ``10.10.61.1`` will appear under Hosts-\u003eHost List as well."},{"line_number":894,"context_line":""},{"line_number":895,"context_line":"#. Register the wwn with more ports if needed."},{"line_number":896,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_91f3459f","line":893,"updated":"2015-12-10 17:48:43.000000000","message":":guilabel:`Hosts`-\u003e:guilabel:`Host`","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":951,"context_line":"   the compute node. Register ``iqn.1993-08.org.debian:01:1a2b3c4d5f6g`` in"},{"line_number":952,"context_line":"   Unisphere:"},{"line_number":953,"context_line":""},{"line_number":954,"context_line":"   #. Login to Unisphere, go to FNM0000000000-\u003eHosts-\u003eInitiators."},{"line_number":955,"context_line":""},{"line_number":956,"context_line":"   #. Refresh and wait until the initiator"},{"line_number":957,"context_line":"   ``iqn.1993-08.org.debian:01:1a2b3c4d5f6g`` with SP Port ``A-8v0`` appears."}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_914fc5bd","line":954,"updated":"2015-12-10 17:48:43.000000000","message":"change same as line 878","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":956,"context_line":"   #. Refresh and wait until the initiator"},{"line_number":957,"context_line":"   ``iqn.1993-08.org.debian:01:1a2b3c4d5f6g`` with SP Port ``A-8v0`` appears."},{"line_number":958,"context_line":""},{"line_number":959,"context_line":"   #. Click the Register button, select CLARiiON/VNX and enter the hostname"},{"line_number":960,"context_line":"      (which is the output of the :command:`hostname` command) and IP address:"},{"line_number":961,"context_line":""},{"line_number":962,"context_line":"      -  Hostname: ``myhost1``"}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_31e5b1a7","line":959,"updated":"2015-12-10 17:48:43.000000000","message":"same as 884 line","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":16237,"name":"venkatamahesh","email":"venkatamaheshkotha@gmail.com","username":"venkatamahesh"},"change_message_id":"e2567993d787a992a8ec3ab97228bba35a1bf54f","unresolved":false,"context_lines":[{"line_number":963,"context_line":""},{"line_number":964,"context_line":"      -  IP: ``10.10.61.1``"},{"line_number":965,"context_line":""},{"line_number":966,"context_line":"      -  Click Register"},{"line_number":967,"context_line":""},{"line_number":968,"context_line":"   #. Then host ``10.10.61.1`` will appear under Hosts-\u003eHost List as well."},{"line_number":969,"context_line":""}],"source_content_type":"text/x-rst","patch_set":1,"id":"7a740942_11bf5561","line":966,"updated":"2015-12-10 17:48:43.000000000","message":"same as line 891","commit_id":"ddd24377bc39b99d71e1790902c4338dd4f1326d"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"1ee7f8af43a049b0ff79a4fca979386d361e9b0b","unresolved":false,"context_lines":[{"line_number":122,"context_line":"---------------------"},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"Here is a sample of minimum backend configuration. See following sections for"},{"line_number":125,"context_line":"the detail of each option Replace ``EMCCLIFCDriver`` to ``EMCCLIISCSIDriver``"},{"line_number":126,"context_line":"if your are using the iSCSI driver."},{"line_number":127,"context_line":""},{"line_number":128,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":3,"id":"7a740942_8292f549","line":125,"updated":"2015-12-11 08:11:23.000000000","message":"Missing \".\" after option\n\nto -\u003e with","commit_id":"8aa6a1bd72d3ac76d2d97e81885c5dfe4498ece9"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"1ee7f8af43a049b0ff79a4fca979386d361e9b0b","unresolved":false,"context_lines":[{"line_number":142,"context_line":"---------------------------"},{"line_number":143,"context_line":""},{"line_number":144,"context_line":"Here is a sample of a multi-backend configuration. See following"},{"line_number":145,"context_line":"sections for the detail of each option. Replace ``EMCCLIFCDriver`` to"},{"line_number":146,"context_line":"``EMCCLIISCSIDriver`` if your are using the iSCSI driver."},{"line_number":147,"context_line":""},{"line_number":148,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":3,"id":"7a740942_a2adb189","line":145,"updated":"2015-12-11 08:11:23.000000000","message":"to -\u003e with","commit_id":"8aa6a1bd72d3ac76d2d97e81885c5dfe4498ece9"}]}