)]}'
{"doc/config-ref-rst/source/block-storage/drivers/emc-vnx-driver.rst":[{"author":{"_account_id":6772,"name":"Stephen Gordon","email":"sgordon@redhat.com","username":"sgordon"},"change_message_id":"2bc33a3a80a36c66ae04353f663e966da3db65de","unresolved":false,"context_lines":[{"line_number":5,"context_line":"EMC VNX driver consists of EMCCLIISCSIDriver and EMCCLIFCDriver, and supports"},{"line_number":6,"context_line":"both iSCSI and FC protocol. ``EMCCLIISCSIDriver`` (VNX iSCSI driver) and"},{"line_number":7,"context_line":"``EMCCLIFCDriver`` (VNX FC driver) are separately based on the ``ISCSIDriver``"},{"line_number":8,"context_line":"and ``FCDriver`` defined in the Block Storage."},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"The VNX iSCSI driver and VNX FC driver perform the volume operations by"},{"line_number":11,"context_line":"executing Navisphere CLI (NaviSecCLI) which is a command-line interface used"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_79b690fa","line":8,"updated":"2015-12-11 14:23:46.000000000","message":"Block Storage service?","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":5,"context_line":"EMC VNX driver consists of EMCCLIISCSIDriver and EMCCLIFCDriver, and supports"},{"line_number":6,"context_line":"both iSCSI and FC protocol. ``EMCCLIISCSIDriver`` (VNX iSCSI driver) and"},{"line_number":7,"context_line":"``EMCCLIFCDriver`` (VNX FC driver) are separately based on the ``ISCSIDriver``"},{"line_number":8,"context_line":"and ``FCDriver`` defined in the Block Storage."},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"The VNX iSCSI driver and VNX FC driver perform the volume operations by"},{"line_number":11,"context_line":"executing Navisphere CLI (NaviSecCLI) which is a command-line interface used"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_39f7a88c","line":8,"in_reply_to":"7a740942_79b690fa","updated":"2015-12-11 14:42:41.000000000","message":"+1","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":111,"context_line":""},{"line_number":112,"context_line":".. _emc-vnx-conf:"},{"line_number":113,"context_line":""},{"line_number":114,"context_line":"Backend configuration"},{"line_number":115,"context_line":"~~~~~~~~~~~~~~~~~~~~~"},{"line_number":116,"context_line":""},{"line_number":117,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_198bccc4","line":114,"updated":"2015-12-11 14:42:41.000000000","message":"I know this isn\u0027t part of the change, but if you do another patch... should be Back-end configuration when used as an adjective.","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":137,"context_line":"   volume_driver \u003d cinder.volume.drivers.emc.emc_cli_fc.EMCCLIFCDriver"},{"line_number":138,"context_line":"   initiator_auto_registration \u003d True"},{"line_number":139,"context_line":""},{"line_number":140,"context_line":"Multi-backend configuration"},{"line_number":141,"context_line":"---------------------------"},{"line_number":142,"context_line":""},{"line_number":143,"context_line":"Here is a sample of a multi-backend configuration. See the following"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_7946907c","line":140,"updated":"2015-12-11 14:42:41.000000000","message":"Would it be better to say \"Multiple back-end configuration\"?","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":140,"context_line":"Multi-backend configuration"},{"line_number":141,"context_line":"---------------------------"},{"line_number":142,"context_line":""},{"line_number":143,"context_line":"Here is a sample of a multi-backend configuration. See the following"},{"line_number":144,"context_line":"sections for the detail of each option. Replace ``EMCCLIFCDriver``"},{"line_number":145,"context_line":"with ``EMCCLIISCSIDriver`` if you are using the iSCSI driver."},{"line_number":146,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_19274ccb","line":143,"updated":"2015-12-11 14:42:41.000000000","message":"...multiple back-end configuration. ?","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":284,"context_line":".. note::"},{"line_number":285,"context_line":""},{"line_number":286,"context_line":"   -  Rather than de-registered, the registered ports will be simply"},{"line_number":287,"context_line":"      bypassed whatever they are in ``io_port_list`` or not."},{"line_number":288,"context_line":""},{"line_number":289,"context_line":"   -  The driver will raise an exception if ports in ``io_port_list``"},{"line_number":290,"context_line":"      are not existed in VNX during startup."}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_d452e9dd","line":287,"updated":"2015-12-11 14:42:41.000000000","message":"should whatever be \"whether or not they are in....\"?","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":287,"context_line":"      bypassed whatever they are in ``io_port_list`` or not."},{"line_number":288,"context_line":""},{"line_number":289,"context_line":"   -  The driver will raise an exception if ports in ``io_port_list``"},{"line_number":290,"context_line":"      are not existed in VNX during startup."},{"line_number":291,"context_line":""},{"line_number":292,"context_line":"Force delete volumes in storage group"},{"line_number":293,"context_line":"-------------------------------------"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_34f80dc3","line":290,"updated":"2015-12-11 14:42:41.000000000","message":"suggest: The driver raises an exception if ports in \" \" do not exist in VNX during start up.\"","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":300,"context_line":""},{"line_number":301,"context_line":"When ``force_delete_lun_in_storagegroup`` is set to ``True`` in the back-end"},{"line_number":302,"context_line":"section, the driver will move the volumes out of the storage groups and then"},{"line_number":303,"context_line":"delete them if the user tries to delete the volumes that remain in storage"},{"line_number":304,"context_line":"group on the VNX array."},{"line_number":305,"context_line":""},{"line_number":306,"context_line":"The default value of ``force_delete_lun_in_storagegroup`` is ``False``."}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_74ad359a","line":303,"updated":"2015-12-11 14:42:41.000000000","message":"..in the storage group...","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":542,"context_line":""},{"line_number":543,"context_line":".. note::"},{"line_number":544,"context_line":""},{"line_number":545,"context_line":"   Tiering policy can not be applied to a deduplicated volume. Tiering"},{"line_number":546,"context_line":"   policy of the deduplicated LUN align with the settings of the pool."},{"line_number":547,"context_line":""},{"line_number":548,"context_line":"FAST cache support"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_b495dd33","line":545,"updated":"2015-12-11 14:42:41.000000000","message":"suggest: The tiering policy cannot....\"\nsuggest: The tiering policy of the ....\"","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":17832,"name":"Linette Williams","email":"stemke@us.ibm.com","username":"lwilliams"},"change_message_id":"fcf5ca32ead823b090fcf638a3aa6d16b017fdde","unresolved":false,"context_lines":[{"line_number":578,"context_line":"The VNX driver supports snap-copy, which extremely accelerates the process for"},{"line_number":579,"context_line":"creating a copied volume."},{"line_number":580,"context_line":""},{"line_number":581,"context_line":"By default, the driver will do full data copy while creating a volume from a"},{"line_number":582,"context_line":"snapshot or cloning a volume, which is time-consuming especially for large"},{"line_number":583,"context_line":"volumes. When the snap-copy is used, the driver will simply create a snapshot"},{"line_number":584,"context_line":"and mount it as a volume for the two types of operations which will be instant"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_f4d5a5e4","line":581,"updated":"2015-12-11 14:42:41.000000000","message":"By default, the driver will do a full data copy....","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":6772,"name":"Stephen Gordon","email":"sgordon@redhat.com","username":"sgordon"},"change_message_id":"2bc33a3a80a36c66ae04353f663e966da3db65de","unresolved":false,"context_lines":[{"line_number":860,"context_line":"   it is ``/etc/cinder/cinder.conf`` file). Add option"},{"line_number":861,"context_line":"   ``storage_vnx_security_file_dir`` and set its value to the directory path of"},{"line_number":862,"context_line":"   your security file generated in step 4. Omit this option if"},{"line_number":863,"context_line":"   ``-secfilepath`` is not used in step 4."},{"line_number":864,"context_line":""},{"line_number":865,"context_line":"#. Restart the ``cinder-volume`` service to validate the change."},{"line_number":866,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_19d0ac1e","line":863,"updated":"2015-12-11 14:23:46.000000000","message":"Minor nit, in that we\u0027re using auto numbering so it would be ideal if we didn\u0027t say step 4 but instead used something descriptive e.g. \u0027when creating the credentials earlier\u0027 as the number may change over time and this update be missed.","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":879,"context_line":"the nodes running the ``cinder-volume`` service (Block Storage nodes) must be"},{"line_number":880,"context_line":"registered with the VNX as well."},{"line_number":881,"context_line":""},{"line_number":882,"context_line":"The steps mentioned below are for the Compute nodes. Follow the same"},{"line_number":883,"context_line":"steps for the Block Storage nodes also (The steps can be skipped if initiator"},{"line_number":884,"context_line":"auto registration is enabled)."},{"line_number":885,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_efdf0ed4","line":882,"updated":"2015-12-11 15:19:47.000000000","message":"Compute -\u003e compute\n\nhttp://docs.openstack.org/glossary/content/glossary.html","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":888,"context_line":"   ``myhost1`` and ``10.10.61.1``. Register"},{"line_number":889,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` in Unisphere:"},{"line_number":890,"context_line":""},{"line_number":891,"context_line":"#. Login to :guilabel:`Unisphere`, go to"},{"line_number":892,"context_line":"   :guilabel:`FNM0000000000`-\u003e:guilabel:`Hosts`-\u003e:guilabel:`Initiators`."},{"line_number":893,"context_line":""},{"line_number":894,"context_line":"#. Refresh and wait until the initiator"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_4f32e25f","line":891,"updated":"2015-12-11 15:19:47.000000000","message":"Login -\u003e Log in","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":889,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` in Unisphere:"},{"line_number":890,"context_line":""},{"line_number":891,"context_line":"#. Login to :guilabel:`Unisphere`, go to"},{"line_number":892,"context_line":"   :guilabel:`FNM0000000000`-\u003e:guilabel:`Hosts`-\u003e:guilabel:`Initiators`."},{"line_number":893,"context_line":""},{"line_number":894,"context_line":"#. Refresh and wait until the initiator"},{"line_number":895,"context_line":"   ``20:00:00:24:FF:48:BA:C2:21:00:00:24:FF:48:BA:C2`` with SP Port ``A-1``"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_2a7664d7","line":892,"updated":"2015-12-11 15:19:47.000000000","message":"Please use the :menuselection: directive instead here:\n\nhttp://docs.openstack.org/contributor-guide/rst-conv/inline-markups.html#gui-element","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":906,"context_line":"   -  Click :guilabel:`Register`."},{"line_number":907,"context_line":""},{"line_number":908,"context_line":"#. Then host ``10.10.61.1`` will appear under"},{"line_number":909,"context_line":"   :guilabel:`Hosts`-\u003e:guilabel:`Host` List as well."},{"line_number":910,"context_line":""},{"line_number":911,"context_line":"#. Register the ``wwn`` with more ports if needed."},{"line_number":912,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_ea293c9c","line":909,"updated":"2015-12-11 15:19:47.000000000","message":"See my comment from the line 987.","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":944,"context_line":""},{"line_number":945,"context_line":"         # iscsiadm -m discovery -t st -p 10.10.61.35"},{"line_number":946,"context_line":""},{"line_number":947,"context_line":"   #. Enter the ``/etc/iscsi`` file:"},{"line_number":948,"context_line":""},{"line_number":949,"context_line":"      .. code-block:: console"},{"line_number":950,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_ef52ae34","line":947,"updated":"2015-12-11 15:19:47.000000000","message":"Not sure how can we enter a file. Maybe replace \u0027Enter\u0027 with \u0027Open\u0027?","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":956,"context_line":""},{"line_number":957,"context_line":"         # more initiatorname.iscsi"},{"line_number":958,"context_line":""},{"line_number":959,"context_line":"#. Login to :guilabel:`VNX` from the compute node using the target"},{"line_number":960,"context_line":"   corresponding to the SPA port:"},{"line_number":961,"context_line":""},{"line_number":962,"context_line":"   .. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_0adfe869","line":959,"updated":"2015-12-11 15:19:47.000000000","message":"Log in (please checkout throughout the doc)","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":968,"context_line":"   Unisphere:"},{"line_number":969,"context_line":""},{"line_number":970,"context_line":"   #. Login to :guilabel:`Unisphere`, go to"},{"line_number":971,"context_line":"      :guilabel:`FNM0000000000`-\u003e:guilabel:`Hosts`-\u003e:guilabel:`Initiators`."},{"line_number":972,"context_line":""},{"line_number":973,"context_line":"   #. Refresh and wait until the initiator"},{"line_number":974,"context_line":"   ``iqn.1993-08.org.debian:01:1a2b3c4d5f6g`` with SP Port ``A-8v0`` appears."}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_0accc868","line":971,"updated":"2015-12-11 15:19:47.000000000","message":"Please use the :menuselection: directive instead here.","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":984,"context_line":"      -  Click :guilabel:`Register`."},{"line_number":985,"context_line":""},{"line_number":986,"context_line":"   #. Then host ``10.10.61.1`` will appear under"},{"line_number":987,"context_line":"      :guilabel:`Hosts`-\u003e:guilabel:`Host` List as well."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"#. Logout :guilabel:`iSCSI` on the node:"},{"line_number":990,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_2a6c2434","line":987,"updated":"2015-12-11 15:19:47.000000000","message":":guilabel:`Hosts`-\u003e:guilabel:`Host` List -\u003e :menuselection:`Hosts` \u003e `Host List`","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":14962,"name":"ologvinova","email":"ologvinova@mirantis.com","username":"ologvinova"},"change_message_id":"1d82d3c3d2d4ddd7b56af84a9945b6565bf3a4dd","unresolved":false,"context_lines":[{"line_number":986,"context_line":"   #. Then host ``10.10.61.1`` will appear under"},{"line_number":987,"context_line":"      :guilabel:`Hosts`-\u003e:guilabel:`Host` List as well."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"#. Logout :guilabel:`iSCSI` on the node:"},{"line_number":990,"context_line":""},{"line_number":991,"context_line":"   .. code-block:: console"},{"line_number":992,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"7a740942_ea713c0d","line":989,"updated":"2015-12-11 15:19:47.000000000","message":"Log out (please, also fix in the whole doc).","commit_id":"13aa1cd09a7fda840afd63f643191a0932430bce"},{"author":{"_account_id":10497,"name":"KATO Tomoyuki","email":"kato.tomoyuki@jp.fujitsu.com","username":"to222"},"change_message_id":"da57dc1f82ca08a23c8c90d73df3e5cffd180278","unresolved":false,"context_lines":[{"line_number":906,"context_line":"   -  Click :guilabel:`Register`."},{"line_number":907,"context_line":""},{"line_number":908,"context_line":"#. Then host ``10.10.61.1`` will appear under"},{"line_number":909,"context_line":"   :guilabel:`Hosts`-\u003e:guilabel:`Host` List-\u003e:menuselection:`Hosts \u003e Host`"},{"line_number":910,"context_line":"   as well."},{"line_number":911,"context_line":""},{"line_number":912,"context_line":"#. Register the ``wwn`` with more ports if needed."}],"source_content_type":"text/x-rst","patch_set":3,"id":"7a740942_298dfa7b","line":909,"updated":"2015-12-11 23:44:14.000000000","message":"duplicate menu\n\n:menuselection:`Hosts \u003e Host`","commit_id":"69683cc6ef7ea84fb02ff85e659e82182268776c"},{"author":{"_account_id":10497,"name":"KATO Tomoyuki","email":"kato.tomoyuki@jp.fujitsu.com","username":"to222"},"change_message_id":"da57dc1f82ca08a23c8c90d73df3e5cffd180278","unresolved":false,"context_lines":[{"line_number":985,"context_line":"      -  Click :guilabel:`Register`."},{"line_number":986,"context_line":""},{"line_number":987,"context_line":"   #. Then host ``10.10.61.1`` will appear under"},{"line_number":988,"context_line":"      :guilabel:`Hosts`-\u003e:guilabel:`Host` List-\u003e:menuselection:`Hosts \u003e Host`"},{"line_number":989,"context_line":"      as well."},{"line_number":990,"context_line":""},{"line_number":991,"context_line":"#. Log out :guilabel:`iSCSI` on the node:"}],"source_content_type":"text/x-rst","patch_set":3,"id":"7a740942_a9efaa1b","line":988,"updated":"2015-12-11 23:44:14.000000000","message":"same. duplicate menu.","commit_id":"69683cc6ef7ea84fb02ff85e659e82182268776c"},{"author":{"_account_id":10497,"name":"KATO Tomoyuki","email":"kato.tomoyuki@jp.fujitsu.com","username":"to222"},"change_message_id":"3636c3ef77a5eeb488d5bf610887e3fc33621787","unresolved":false,"context_lines":[{"line_number":906,"context_line":"   -  Click :guilabel:`Register`."},{"line_number":907,"context_line":""},{"line_number":908,"context_line":"#. Then host ``10.10.61.1`` will appear under"},{"line_number":909,"context_line":"   :menuselection:`Hosts \u003e Host` List as well."},{"line_number":910,"context_line":""},{"line_number":911,"context_line":"#. Register the ``wwn`` with more ports if needed."},{"line_number":912,"context_line":""}],"source_content_type":"text/x-rst","patch_set":4,"id":"7a740942_73b1ab8e","line":909,"updated":"2015-12-12 07:39:18.000000000","message":":menuselection:`Hosts \u003e Host List`?","commit_id":"dfb777acb3fe412c1a51113363b96bfd46d6db41"},{"author":{"_account_id":10497,"name":"KATO Tomoyuki","email":"kato.tomoyuki@jp.fujitsu.com","username":"to222"},"change_message_id":"3636c3ef77a5eeb488d5bf610887e3fc33621787","unresolved":false,"context_lines":[{"line_number":984,"context_line":"      -  Click :guilabel:`Register`."},{"line_number":985,"context_line":""},{"line_number":986,"context_line":"   #. Then host ``10.10.61.1`` will appear under"},{"line_number":987,"context_line":"      :menuselection:`Hosts \u003e Host` List as well."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"#. Log out :guilabel:`iSCSI` on the node:"},{"line_number":990,"context_line":""}],"source_content_type":"text/x-rst","patch_set":4,"id":"7a740942_93ae972c","line":987,"updated":"2015-12-12 07:39:18.000000000","message":":menuselection:`Hosts \u003e Host List`?","commit_id":"dfb777acb3fe412c1a51113363b96bfd46d6db41"}]}