)]}'
{"/COMMIT_MSG":[{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":6,"context_line":""},{"line_number":7,"context_line":"[networking-guide] Update qos config doc"},{"line_number":8,"context_line":""},{"line_number":9,"context_line":"Add note about how burst value should be configured and what will be impact if"},{"line_number":10,"context_line":"burst value will be set too low or too high."},{"line_number":11,"context_line":""},{"line_number":12,"context_line":"Change-Id: I42a7b48d7923551d1c4a2e5d51ae7e0230b4ed44"}],"source_content_type":"text/x-gerrit-commit-message","patch_set":1,"id":"1a122d0e_f3cd5eb8","line":9,"range":{"start_line":9,"start_character":72,"end_line":9,"end_character":78},"updated":"2016-04-18 13:57:49.000000000","message":"I think this line is too long.  Also, you should put \"the\" before \"impact\".","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":6,"context_line":""},{"line_number":7,"context_line":"[networking-guide] Update qos config doc"},{"line_number":8,"context_line":""},{"line_number":9,"context_line":"Add note about how burst value should be configured and what will be impact if"},{"line_number":10,"context_line":"burst value will be set too low or too high."},{"line_number":11,"context_line":""},{"line_number":12,"context_line":"Change-Id: I42a7b48d7923551d1c4a2e5d51ae7e0230b4ed44"}],"source_content_type":"text/x-gerrit-commit-message","patch_set":1,"id":"1a122d0e_1d1c4011","line":9,"range":{"start_line":9,"start_character":72,"end_line":9,"end_character":78},"in_reply_to":"1a122d0e_f3cd5eb8","updated":"2016-04-19 08:55:14.000000000","message":"Yep. I don\u0027t know how I made it. Fixed :)","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"}],"doc/networking-guide/source/adv-config-qos.rst":[{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_73166ef2","line":233,"range":{"start_line":233,"start_character":4,"end_line":233,"end_character":37},"updated":"2016-04-18 13:57:49.000000000","message":"Suggestion: \"Configuring the proper burst value\"","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_3aedc225","line":233,"range":{"start_line":233,"start_character":4,"end_line":233,"end_character":37},"in_reply_to":"1a122d0e_73166ef2","updated":"2016-04-19 08:55:14.000000000","message":"Changed. Thx.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_d3b662db","line":235,"range":{"start_line":233,"start_character":57,"end_line":235,"end_character":11},"updated":"2016-04-18 13:57:49.000000000","message":"\"enouth\" -\u003e \"enough\"\n\nAlso, I think this could be reworded for clarity.  For example: \"If the burst value is set too low then bandwidth usage will be throttled even with a proper bandwidth limit setting.\"","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_534092a5","line":235,"range":{"start_line":235,"start_character":13,"end_line":235,"end_character":51},"updated":"2016-04-18 13:57:49.000000000","message":"I don\u0027t think \"e.g.\" is sufficient here given what comes before it in the sentence.  You could say, \"This issue is discussed in various documentation sources, e.g.\".","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_fa8cea80","line":235,"range":{"start_line":235,"start_character":13,"end_line":235,"end_character":51},"in_reply_to":"1a122d0e_534092a5","updated":"2016-04-19 08:55:14.000000000","message":"Changed. Thx","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":841,"name":"Akihiro Motoki","email":"amotoki@gmail.com","username":"amotoki"},"change_message_id":"63a685fa7bab98548d591e9dad1adf446163297b","unresolved":false,"context_lines":[{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_c1184c87","line":235,"range":{"start_line":235,"start_character":13,"end_line":235,"end_character":51},"in_reply_to":"1a122d0e_534092a5","updated":"2016-04-18 14:37:42.000000000","message":"If you need to use \u0027e.g.\u0027, please use \u0027for example\u0027. It is recommended in the document contributor guide.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_5a835e56","line":235,"range":{"start_line":235,"start_character":13,"end_line":235,"end_character":51},"in_reply_to":"1a122d0e_c1184c87","updated":"2016-04-19 08:55:14.000000000","message":"Changed","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configation of proper burst value is very important. If burst value will be"},{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_7a80da46","line":235,"range":{"start_line":233,"start_character":57,"end_line":235,"end_character":11},"in_reply_to":"1a122d0e_d3b662db","updated":"2016-04-19 08:55:14.000000000","message":"Changed","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_33223602","line":237,"range":{"start_line":237,"start_character":32,"end_line":237,"end_character":43},"updated":"2016-04-18 13:57:49.000000000","message":"You repeated \"burst value\".","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":234,"context_line":"    set too low then it can be not enouth to ensure that then bandwidth limit is"},{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_fa5eaa10","line":237,"range":{"start_line":237,"start_character":32,"end_line":237,"end_character":43},"in_reply_to":"1a122d0e_33223602","updated":"2016-04-19 08:55:14.000000000","message":"Fixed","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":841,"name":"Akihiro Motoki","email":"amotoki@gmail.com","username":"amotoki"},"change_message_id":"63a685fa7bab98548d591e9dad1adf446163297b","unresolved":false,"context_lines":[{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"},{"line_number":241,"context_line":"    higher than expected."}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_7ca0fb9f","line":238,"updated":"2016-04-18 14:37:42.000000000","message":"What does L.237-238 suggest?\nburst value and bandwidth have different unit (byte vs byte/sec), so I wonder what is suggested. More clarification would be appreciated.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":841,"name":"Akihiro Motoki","email":"amotoki@gmail.com","username":"amotoki"},"change_message_id":"4249b860e02d83b9f3e0f40222f5cd6acb0af1ad","unresolved":false,"context_lines":[{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"},{"line_number":241,"context_line":"    higher than expected."}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_55da7fea","line":238,"in_reply_to":"1a122d0e_7aa9fade","updated":"2016-04-21 14:59:27.000000000","message":"Thanks. It is now clear to me.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"},{"line_number":241,"context_line":"    higher than expected."}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_7aa9fade","line":238,"in_reply_to":"1a122d0e_7ca0fb9f","updated":"2016-04-19 08:55:14.000000000","message":"I added example here. Hope it will be better now.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":13995,"name":"Nate Johnston","email":"nate.johnston@redhat.com","username":"natejohnston"},"change_message_id":"b3c640aa36db0c7fc3e788bac4ebe74fc3387847","unresolved":false,"context_lines":[{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"},{"line_number":241,"context_line":"    higher than expected."},{"line_number":242,"context_line":""},{"line_number":243,"context_line":""},{"line_number":244,"context_line":"Administrator enforcement"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_3350765e","line":241,"range":{"start_line":238,"start_character":22,"end_line":241,"end_character":25},"updated":"2016-04-18 13:57:49.000000000","message":"s/configured burst/the configured burst value/g\n\nMake sure everything is in present sense, not future tense.","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"3ecba8cbdf3302e185409a06f4d80a994c6155f2","unresolved":false,"context_lines":[{"line_number":235,"context_line":"    proper.  More info about that can be found e.g. in `Juniper\u0027s documenation"},{"line_number":236,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":237,"context_line":"    Burst value for TCP traffic burst value can be set as 80% of desired"},{"line_number":238,"context_line":"    bandwidth limit.  If configured burst will be too low, achieved bandwidth"},{"line_number":239,"context_line":"    limit will be lower than expected. If configured burst value will be too"},{"line_number":240,"context_line":"    high, too few packets could be limited and achieved bandwidth limit would be"},{"line_number":241,"context_line":"    higher than expected."},{"line_number":242,"context_line":""},{"line_number":243,"context_line":""},{"line_number":244,"context_line":"Administrator enforcement"}],"source_content_type":"text/x-rst","patch_set":1,"id":"1a122d0e_1a5726cf","line":241,"range":{"start_line":238,"start_character":22,"end_line":241,"end_character":25},"in_reply_to":"1a122d0e_3350765e","updated":"2016-04-19 08:55:14.000000000","message":"Done","commit_id":"b49ece66bd9c2b78b242c5cd1120171055312bc5"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"4a4fd0228d4e0b08b80463baa813d65fe234f99e","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_fc37994a","line":233,"range":{"start_line":233,"start_character":4,"end_line":233,"end_character":5},"updated":"2016-04-20 01:55:34.000000000","message":"If you could line this up to be under the \u0027n\u0027 in note.","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"09537746e9726c92a11481dedd2cdd4a8d291912","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_4daecf81","line":233,"range":{"start_line":233,"start_character":4,"end_line":233,"end_character":5},"in_reply_to":"1a122d0e_fc37994a","updated":"2016-04-20 08:27:04.000000000","message":"Done","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"4a4fd0228d4e0b08b80463baa813d65fe234f99e","unresolved":false,"context_lines":[{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_5cfa0d76","line":234,"range":{"start_line":234,"start_character":12,"end_line":234,"end_character":15},"updated":"2016-04-20 01:55:34.000000000","message":"too low, bandwidth*","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"09537746e9726c92a11481dedd2cdd4a8d291912","unresolved":false,"context_lines":[{"line_number":231,"context_line":".. note::"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_2db393ea","line":234,"range":{"start_line":234,"start_character":12,"end_line":234,"end_character":15},"in_reply_to":"1a122d0e_5cfa0d76","updated":"2016-04-20 08:27:04.000000000","message":"Done","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"4a4fd0228d4e0b08b80463baa813d65fe234f99e","unresolved":false,"context_lines":[{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":238,"context_line":"    Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":239,"context_line":"    value. For example if bandwidth limit is set to 1000kbps then enough burst"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_3cf7518c","line":236,"range":{"start_line":236,"start_character":39,"end_line":236,"end_character":51},"updated":"2016-04-20 01:55:34.000000000","message":"documentation*","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"09537746e9726c92a11481dedd2cdd4a8d291912","unresolved":false,"context_lines":[{"line_number":233,"context_line":"    Configuring the proper burst value is very important. If the burst value is"},{"line_number":234,"context_line":"    set too low then bandwidth usage will be throttled even with a proper"},{"line_number":235,"context_line":"    bandwidth limit setting. This issue is discussed in various documentation"},{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":238,"context_line":"    Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":239,"context_line":"    value. For example if bandwidth limit is set to 1000kbps then enough burst"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_adbfa3a8","line":236,"range":{"start_line":236,"start_character":39,"end_line":236,"end_character":51},"in_reply_to":"1a122d0e_3cf7518c","updated":"2016-04-20 08:27:04.000000000","message":"Done","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"4a4fd0228d4e0b08b80463baa813d65fe234f99e","unresolved":false,"context_lines":[{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":238,"context_line":"    Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":239,"context_line":"    value. For example if bandwidth limit is set to 1000kbps then enough burst"},{"line_number":240,"context_line":"    value will be 800kbit. If the configured burst value is too low, achieved"},{"line_number":241,"context_line":"    bandwidth limit will be lower than expected. If the configured burst value"},{"line_number":242,"context_line":"    is too high, too few packets could be limited and achieved bandwidth limit"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_dc2c5d04","line":239,"range":{"start_line":239,"start_character":15,"end_line":239,"end_character":22},"updated":"2016-04-20 01:55:34.000000000","message":"example, if the bandwidth*","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"09537746e9726c92a11481dedd2cdd4a8d291912","unresolved":false,"context_lines":[{"line_number":236,"context_line":"    sources, for example in `Juniper\u0027s documenation"},{"line_number":237,"context_line":"    \u003chttp://www.juniper.net/documentation/en_US/junos12.3/topics/concept/policer-mx-m120-m320-burstsize-determining.html\u003e`_."},{"line_number":238,"context_line":"    Burst value for TCP traffic can be set as 80% of desired bandwidth limit"},{"line_number":239,"context_line":"    value. For example if bandwidth limit is set to 1000kbps then enough burst"},{"line_number":240,"context_line":"    value will be 800kbit. If the configured burst value is too low, achieved"},{"line_number":241,"context_line":"    bandwidth limit will be lower than expected. If the configured burst value"},{"line_number":242,"context_line":"    is too high, too few packets could be limited and achieved bandwidth limit"}],"source_content_type":"text/x-rst","patch_set":3,"id":"1a122d0e_cdd93f24","line":239,"range":{"start_line":239,"start_character":15,"end_line":239,"end_character":22},"in_reply_to":"1a122d0e_dc2c5d04","updated":"2016-04-20 08:27:04.000000000","message":"Done","commit_id":"a70ac8165f35633e68bd82c4740f6dda014c9f89"},{"author":{"_account_id":19779,"name":"Chason Chan","display_name":"chenxing","email":"chason.chan@foxmail.com","username":"chenxing"},"change_message_id":"aa216bde73e60a6314b3fdf2ed20836294e491d3","unresolved":false,"context_lines":[{"line_number":241,"context_line":"   achieved bandwidth limit will be lower than expected. If the configured burst"},{"line_number":242,"context_line":"   value is too high, too few packets could be limited and achieved bandwidth"},{"line_number":243,"context_line":"   limit would be higher than expected."},{"line_number":244,"context_line":""},{"line_number":245,"context_line":""},{"line_number":246,"context_line":"Administrator enforcement"},{"line_number":247,"context_line":"-------------------------"}],"source_content_type":"text/x-rst","patch_set":4,"id":"1a122d0e_f27f6164","line":244,"updated":"2016-04-21 14:34:54.000000000","message":"no need this blank line","commit_id":"ee0cc7e2af63d5fa136bddadf9edddac4074ffcd"},{"author":{"_account_id":11975,"name":"Slawek Kaplonski","email":"skaplons@redhat.com","username":"slaweq"},"change_message_id":"519813fef1d337586911a5c9363e9675da436dd2","unresolved":false,"context_lines":[{"line_number":241,"context_line":"   achieved bandwidth limit will be lower than expected. If the configured burst"},{"line_number":242,"context_line":"   value is too high, too few packets could be limited and achieved bandwidth"},{"line_number":243,"context_line":"   limit would be higher than expected."},{"line_number":244,"context_line":""},{"line_number":245,"context_line":""},{"line_number":246,"context_line":"Administrator enforcement"},{"line_number":247,"context_line":"-------------------------"}],"source_content_type":"text/x-rst","patch_set":4,"id":"1a122d0e_c6e0a7cf","line":244,"in_reply_to":"1a122d0e_f27f6164","updated":"2016-04-21 15:38:20.000000000","message":"removed","commit_id":"ee0cc7e2af63d5fa136bddadf9edddac4074ffcd"}]}