)]}'
{"doc/config-reference/source/block-storage/drivers/emc-vmax-driver.rst":[{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":129,"context_line":"-  Dynamic masking view creation"},{"line_number":130,"context_line":"-  Dynamic determination of the target iSCSI IP address"},{"line_number":131,"context_line":"-  iSCSI multipath support"},{"line_number":132,"context_line":"-  Oversubscription"},{"line_number":133,"context_line":"-  Live Migration"},{"line_number":134,"context_line":""},{"line_number":135,"context_line":"VMAX2"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a73b6e9b","line":132,"range":{"start_line":132,"start_character":3,"end_line":132,"end_character":19},"updated":"2016-09-06 13:22:56.000000000","message":"Over subscription?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"7a1580f05e0222217d6193693bac0ff379ed5e55","unresolved":false,"context_lines":[{"line_number":129,"context_line":"-  Dynamic masking view creation"},{"line_number":130,"context_line":"-  Dynamic determination of the target iSCSI IP address"},{"line_number":131,"context_line":"-  iSCSI multipath support"},{"line_number":132,"context_line":"-  Oversubscription"},{"line_number":133,"context_line":"-  Live Migration"},{"line_number":134,"context_line":""},{"line_number":135,"context_line":"VMAX2"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_286acb1a","line":132,"range":{"start_line":132,"start_character":3,"end_line":132,"end_character":19},"in_reply_to":"9a89bdaa_a73b6e9b","updated":"2016-09-06 13:40:12.000000000","message":"No, this is correct","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":142,"context_line":"-  All Flash support"},{"line_number":143,"context_line":""},{"line_number":144,"context_line":".. note::"},{"line_number":145,"context_line":"   VMAX3 All Flash array with Solutions Enabler 8.3 has compression enabled by default.  This means volumes added to any newly created storage groups will becompressed. "},{"line_number":146,"context_line":""},{"line_number":147,"context_line":"Set up the VMAX drivers"},{"line_number":148,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_e7a9f6e0","line":145,"range":{"start_line":145,"start_character":155,"end_line":145,"end_character":167},"updated":"2016-09-06 13:22:56.000000000","message":"s/becompressed/be compressed/","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":142,"context_line":"-  All Flash support"},{"line_number":143,"context_line":""},{"line_number":144,"context_line":".. note::"},{"line_number":145,"context_line":"   VMAX3 All Flash array with Solutions Enabler 8.3 has compression enabled by default.  This means volumes added to any newly created storage groups will becompressed. "},{"line_number":146,"context_line":""},{"line_number":147,"context_line":"Set up the VMAX drivers"},{"line_number":148,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_6d74e5fc","line":145,"range":{"start_line":145,"start_character":155,"end_line":145,"end_character":167},"in_reply_to":"9a89bdaa_e7a9f6e0","updated":"2016-09-06 13:35:41.000000000","message":"Thanks, we will change this","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":369,"context_line":""},{"line_number":370,"context_line":"Masking views are dynamically created by the VMAX FC and iSCSI drivers using"},{"line_number":371,"context_line":"the following naming conventions. ``[protocol]`` is either ``I`` for volumes"},{"line_number":372,"context_line":"attached over iSCSI and ``F`` for volumes attached over Fiber Channel."},{"line_number":373,"context_line":""},{"line_number":374,"context_line":"VMAX2"},{"line_number":375,"context_line":".. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_e7f736f3","line":372,"range":{"start_line":372,"start_character":20,"end_line":372,"end_character":23},"updated":"2016-09-06 13:22:56.000000000","message":"\"or\" instead of \"and\" here? See also other occurrences below.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":369,"context_line":""},{"line_number":370,"context_line":"Masking views are dynamically created by the VMAX FC and iSCSI drivers using"},{"line_number":371,"context_line":"the following naming conventions. ``[protocol]`` is either ``I`` for volumes"},{"line_number":372,"context_line":"attached over iSCSI and ``F`` for volumes attached over Fiber Channel."},{"line_number":373,"context_line":""},{"line_number":374,"context_line":"VMAX2"},{"line_number":375,"context_line":".. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_ad642d49","line":372,"range":{"start_line":372,"start_character":20,"end_line":372,"end_character":23},"in_reply_to":"9a89bdaa_e7f736f3","updated":"2016-09-06 13:35:41.000000000","message":"Sure","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":461,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":462,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":463,"context_line":""},{"line_number":464,"context_line":"SSL Support"},{"line_number":465,"context_line":"~~~~~~~~~~~"},{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_07225a52","line":464,"range":{"start_line":464,"start_character":0,"end_line":464,"end_character":11},"updated":"2016-09-06 13:22:56.000000000","message":"This shouldn\u0027t be title case. See also below.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":461,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":462,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":463,"context_line":""},{"line_number":464,"context_line":"SSL Support"},{"line_number":465,"context_line":"~~~~~~~~~~~"},{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_2dff3d35","line":464,"range":{"start_line":464,"start_character":0,"end_line":464,"end_character":11},"in_reply_to":"9a89bdaa_07225a52","updated":"2016-09-06 13:35:41.000000000","message":"It was my intention to have it as a title case.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"d3f40413e6db8c52b22ca1938022db0cb12eccc6","unresolved":false,"context_lines":[{"line_number":461,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":462,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":463,"context_line":""},{"line_number":464,"context_line":"SSL Support"},{"line_number":465,"context_line":"~~~~~~~~~~~"},{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_dcc5a08e","line":464,"range":{"start_line":464,"start_character":0,"end_line":464,"end_character":11},"in_reply_to":"9a89bdaa_2dff3d35","updated":"2016-09-06 13:48:05.000000000","message":"Ok but please see the other headings in this guide.\n\nhttp://docs.openstack.org/draft/config-reference/ \n\nIt\u0027s better to be consistent.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"e0bb4753b9d1fc91bae14ec5e84d145d552db8e3","unresolved":false,"context_lines":[{"line_number":461,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":462,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":463,"context_line":""},{"line_number":464,"context_line":"SSL Support"},{"line_number":465,"context_line":"~~~~~~~~~~~"},{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_cbceb4b3","line":464,"range":{"start_line":464,"start_character":0,"end_line":464,"end_character":11},"in_reply_to":"9a89bdaa_dcc5a08e","updated":"2016-09-06 15:00:09.000000000","message":"Sure. Thanks for the clarification","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."},{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a7be0ed2","line":469,"range":{"start_line":469,"start_character":37,"end_line":469,"end_character":43},"updated":"2016-09-06 13:22:56.000000000","message":"Would be better to end these sentences with a colon or period.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."},{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_0ddd19e0","line":469,"range":{"start_line":469,"start_character":37,"end_line":469,"end_character":43},"in_reply_to":"9a89bdaa_a7be0ed2","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":502,"context_line":"Over Subscription Support"},{"line_number":503,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"Over subscription support requires the /etc/cinder/cinder.conf to be updated"},{"line_number":506,"context_line":"with two additional tags max_over_subscription_ratio and/or"},{"line_number":507,"context_line":"reserved_percentage.In the sample below the value of 2.0 for"},{"line_number":508,"context_line":"max_over_subscription_ratio means that the pools in oversubscribed by a"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_27a03e90","line":505,"range":{"start_line":505,"start_character":39,"end_line":505,"end_character":62},"updated":"2016-09-06 13:22:56.000000000","message":"``/etc/cinder/cinder.conf`` file","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":502,"context_line":"Over Subscription Support"},{"line_number":503,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"Over subscription support requires the /etc/cinder/cinder.conf to be updated"},{"line_number":506,"context_line":"with two additional tags max_over_subscription_ratio and/or"},{"line_number":507,"context_line":"reserved_percentage.In the sample below the value of 2.0 for"},{"line_number":508,"context_line":"max_over_subscription_ratio means that the pools in oversubscribed by a"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_0d8b59c4","line":505,"range":{"start_line":505,"start_character":39,"end_line":505,"end_character":62},"in_reply_to":"9a89bdaa_27a03e90","updated":"2016-09-06 13:35:41.000000000","message":"Sure","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":503,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"Over subscription support requires the /etc/cinder/cinder.conf to be updated"},{"line_number":506,"context_line":"with two additional tags max_over_subscription_ratio and/or"},{"line_number":507,"context_line":"reserved_percentage.In the sample below the value of 2.0 for"},{"line_number":508,"context_line":"max_over_subscription_ratio means that the pools in oversubscribed by a"},{"line_number":509,"context_line":"factor of 2, or 200% over subscribed. The reserved_percentage is the high"},{"line_number":510,"context_line":"water mark where by the physical remaining space cannot be exceeded."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_e7b496d2","line":507,"range":{"start_line":506,"start_character":25,"end_line":507,"end_character":20},"updated":"2016-09-06 13:22:56.000000000","message":"``max_over_subscription_ratio`` and/or\n``reserved_percentage``.[missing space]\n\nI\u0027d add `` to all parameter and file names.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":503,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"Over subscription support requires the /etc/cinder/cinder.conf to be updated"},{"line_number":506,"context_line":"with two additional tags max_over_subscription_ratio and/or"},{"line_number":507,"context_line":"reserved_percentage.In the sample below the value of 2.0 for"},{"line_number":508,"context_line":"max_over_subscription_ratio means that the pools in oversubscribed by a"},{"line_number":509,"context_line":"factor of 2, or 200% over subscribed. The reserved_percentage is the high"},{"line_number":510,"context_line":"water mark where by the physical remaining space cannot be exceeded."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_4d9561dc","line":507,"range":{"start_line":506,"start_character":25,"end_line":507,"end_character":20},"in_reply_to":"9a89bdaa_e7b496d2","updated":"2016-09-06 13:35:41.000000000","message":"Sure","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":517,"context_line":"optional."},{"line_number":518,"context_line":""},{"line_number":519,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":520,"context_line":"/etc/cinder/cinder.conf"},{"line_number":521,"context_line":""},{"line_number":522,"context_line":".. code-block:: ini"},{"line_number":523,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a72feef4","line":520,"range":{"start_line":520,"start_character":0,"end_line":520,"end_character":23},"updated":"2016-09-06 13:22:56.000000000","message":"``/etc/cinder/cinder.conf``.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":517,"context_line":"optional."},{"line_number":518,"context_line":""},{"line_number":519,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":520,"context_line":"/etc/cinder/cinder.conf"},{"line_number":521,"context_line":""},{"line_number":522,"context_line":".. code-block:: ini"},{"line_number":523,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_0db27994","line":520,"range":{"start_line":520,"start_character":0,"end_line":520,"end_character":23},"in_reply_to":"9a89bdaa_a72feef4","updated":"2016-09-06 13:35:41.000000000","message":"Will do","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":549,"context_line":"is not set by the user. We default to a hardcoded upper limit which is 150%."},{"line_number":550,"context_line":""},{"line_number":551,"context_line":".. note::"},{"line_number":552,"context_line":"   If FAST is set and multiple pools are associated with a FAST policy, then the same rules apply.  The difference is, the TotalManagedSpace and"},{"line_number":553,"context_line":"   EMCSubscribedCapacity for each pool associated with the FAST policy are aggregated."},{"line_number":554,"context_line":""},{"line_number":555,"context_line":"``Scenario 5`` - EMCMaxSubscriptionPercent is 200 on one pool.  It is 300 on"},{"line_number":556,"context_line":"another pool. The user defined max_over_subscription_ratio is 2.5."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_671de6bc","line":553,"range":{"start_line":552,"start_character":0,"end_line":553,"end_character":86},"updated":"2016-09-06 13:22:56.000000000","message":"This para needs more line breaks I think.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":549,"context_line":"is not set by the user. We default to a hardcoded upper limit which is 150%."},{"line_number":550,"context_line":""},{"line_number":551,"context_line":".. note::"},{"line_number":552,"context_line":"   If FAST is set and multiple pools are associated with a FAST policy, then the same rules apply.  The difference is, the TotalManagedSpace and"},{"line_number":553,"context_line":"   EMCSubscribedCapacity for each pool associated with the FAST policy are aggregated."},{"line_number":554,"context_line":""},{"line_number":555,"context_line":"``Scenario 5`` - EMCMaxSubscriptionPercent is 200 on one pool.  It is 300 on"},{"line_number":556,"context_line":"another pool. The user defined max_over_subscription_ratio is 2.5."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_8d64c922","line":553,"range":{"start_line":552,"start_character":0,"end_line":553,"end_character":86},"in_reply_to":"9a89bdaa_671de6bc","updated":"2016-09-06 13:35:41.000000000","message":"Agreed","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":561,"context_line":""},{"line_number":562,"context_line":"Quality of service has traditionally been associated with network bandwidth"},{"line_number":563,"context_line":"usage. Network administrators set limitations on certain networks in terms of"},{"line_number":564,"context_line":"bandwidth usage for clients. This enables them provide a tiered level of"},{"line_number":565,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":566,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":567,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_27511e63","line":564,"range":{"start_line":564,"start_character":29,"end_line":564,"end_character":54},"updated":"2016-09-06 13:22:56.000000000","message":"This enables them to provide... ?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":561,"context_line":""},{"line_number":562,"context_line":"Quality of service has traditionally been associated with network bandwidth"},{"line_number":563,"context_line":"usage. Network administrators set limitations on certain networks in terms of"},{"line_number":564,"context_line":"bandwidth usage for clients. This enables them provide a tiered level of"},{"line_number":565,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":566,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":567,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_ed71d5e1","line":564,"range":{"start_line":564,"start_character":29,"end_line":564,"end_character":54},"in_reply_to":"9a89bdaa_27511e63","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":573,"context_line":"- Dynamic Distribution"},{"line_number":574,"context_line":"- The VMAX3 offers modification of QOS at the Storage Group level"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"USE CASE 1 - DEFAULT VALUES"},{"line_number":577,"context_line":"---------------------------"},{"line_number":578,"context_line":""},{"line_number":579,"context_line":"Prerequisites - VMAX"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a7f28e6d","line":576,"range":{"start_line":576,"start_character":1,"end_line":576,"end_character":27},"updated":"2016-09-06 13:22:56.000000000","message":"Why all caps here?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":573,"context_line":"- Dynamic Distribution"},{"line_number":574,"context_line":"- The VMAX3 offers modification of QOS at the Storage Group level"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"USE CASE 1 - DEFAULT VALUES"},{"line_number":577,"context_line":"---------------------------"},{"line_number":578,"context_line":""},{"line_number":579,"context_line":"Prerequisites - VMAX"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_8d32090f","line":576,"range":{"start_line":576,"start_character":1,"end_line":576,"end_character":27},"in_reply_to":"9a89bdaa_a7f28e6d","updated":"2016-09-06 13:35:41.000000000","message":"We can change this.  There is no particular reason to have them caps","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":580,"context_line":""},{"line_number":581,"context_line":"- Host I/O Limit (MB/Sec) -     No Limit"},{"line_number":582,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":583,"context_line":"- Set Dynamic Distribution -    NA"},{"line_number":584,"context_line":""},{"line_number":585,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":586,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_47fe2238","line":583,"range":{"start_line":583,"start_character":32,"end_line":583,"end_character":34},"updated":"2016-09-06 13:22:56.000000000","message":"N/A?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":580,"context_line":""},{"line_number":581,"context_line":"- Host I/O Limit (MB/Sec) -     No Limit"},{"line_number":582,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":583,"context_line":"- Set Dynamic Distribution -    NA"},{"line_number":584,"context_line":""},{"line_number":585,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":586,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_ed3f15d4","line":583,"range":{"start_line":583,"start_character":32,"end_line":583,"end_character":34},"in_reply_to":"9a89bdaa_47fe2238","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":748,"context_line":"    $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":749,"context_line":""},{"line_number":750,"context_line":"``Step 2.``"},{"line_number":751,"context_line":"Associate qos specs with specified volume type"},{"line_number":752,"context_line":"cinder qos-associate \u003cqos_specs id\u003e \u003cvolume_type_id\u003e"},{"line_number":753,"context_line":""},{"line_number":754,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a74e0e94","line":751,"range":{"start_line":751,"start_character":10,"end_line":751,"end_character":13},"updated":"2016-09-06 13:22:56.000000000","message":"QOS?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":748,"context_line":"    $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":749,"context_line":""},{"line_number":750,"context_line":"``Step 2.``"},{"line_number":751,"context_line":"Associate qos specs with specified volume type"},{"line_number":752,"context_line":"cinder qos-associate \u003cqos_specs id\u003e \u003cvolume_type_id\u003e"},{"line_number":753,"context_line":""},{"line_number":754,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_ad1c2d78","line":751,"range":{"start_line":751,"start_character":10,"end_line":751,"end_character":13},"in_reply_to":"9a89bdaa_a74e0e94","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":769,"context_line":"- Set Dynamic Distribution -    NA"},{"line_number":770,"context_line":""},{"line_number":771,"context_line":"``Outcome`` - Cinder"},{"line_number":772,"context_line":"Volume is created against volume type and there is no QOS change"},{"line_number":773,"context_line":""},{"line_number":774,"context_line":"iSCSI Multipathing Support"},{"line_number":775,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_070eda3a","line":772,"range":{"start_line":772,"start_character":0,"end_line":772,"end_character":64},"updated":"2016-09-06 13:22:56.000000000","message":"Missing period? See also other occurrences.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":769,"context_line":"- Set Dynamic Distribution -    NA"},{"line_number":770,"context_line":""},{"line_number":771,"context_line":"``Outcome`` - Cinder"},{"line_number":772,"context_line":"Volume is created against volume type and there is no QOS change"},{"line_number":773,"context_line":""},{"line_number":774,"context_line":"iSCSI Multipathing Support"},{"line_number":775,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_0815073f","line":772,"range":{"start_line":772,"start_character":0,"end_line":772,"end_character":64},"in_reply_to":"9a89bdaa_070eda3a","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":779,"context_line":"  software"},{"line_number":780,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":781,"context_line":""},{"line_number":782,"context_line":"This example is using ubuntu14.04"},{"line_number":783,"context_line":".. code-block:: console"},{"line_number":784,"context_line":""},{"line_number":785,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_22658ce0","line":782,"range":{"start_line":782,"start_character":22,"end_line":782,"end_character":33},"updated":"2016-09-06 13:22:56.000000000","message":"Ubuntu 14.04: ?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":779,"context_line":"  software"},{"line_number":780,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":781,"context_line":""},{"line_number":782,"context_line":"This example is using ubuntu14.04"},{"line_number":783,"context_line":".. code-block:: console"},{"line_number":784,"context_line":""},{"line_number":785,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_c8215fa1","line":782,"range":{"start_line":782,"start_character":22,"end_line":782,"end_character":33},"in_reply_to":"9a89bdaa_22658ce0","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":782,"context_line":"This example is using ubuntu14.04"},{"line_number":783,"context_line":".. code-block:: console"},{"line_number":784,"context_line":""},{"line_number":785,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":786,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":787,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":788,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"Multipath configuration file"},{"line_number":791,"context_line":"----------------------------"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_8283b855","line":788,"range":{"start_line":785,"start_character":0,"end_line":788,"end_character":48},"updated":"2016-09-06 13:22:56.000000000","message":"You should either add commands for other distros or make this distro-agnostic.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":782,"context_line":"This example is using ubuntu14.04"},{"line_number":783,"context_line":".. code-block:: console"},{"line_number":784,"context_line":""},{"line_number":785,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":786,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":787,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":788,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"Multipath configuration file"},{"line_number":791,"context_line":"----------------------------"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a89fbbb2","line":788,"range":{"start_line":785,"start_character":0,"end_line":788,"end_character":48},"in_reply_to":"9a89bdaa_8283b855","updated":"2016-09-06 13:35:41.000000000","message":"Agreed","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":791,"context_line":"----------------------------"},{"line_number":792,"context_line":""},{"line_number":793,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":794,"context_line":"performance. Login a privileged user and make the following changes to"},{"line_number":795,"context_line":"``/etc/multipath.conf`` on Nova compute node(s)."},{"line_number":796,"context_line":""},{"line_number":797,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_c27dc06f","line":794,"range":{"start_line":794,"start_character":13,"end_line":794,"end_character":18},"updated":"2016-09-06 13:22:56.000000000","message":"Log in as a?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":791,"context_line":"----------------------------"},{"line_number":792,"context_line":""},{"line_number":793,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":794,"context_line":"performance. Login a privileged user and make the following changes to"},{"line_number":795,"context_line":"``/etc/multipath.conf`` on Nova compute node(s)."},{"line_number":796,"context_line":""},{"line_number":797,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_08b18747","line":794,"range":{"start_line":794,"start_character":13,"end_line":794,"end_character":18},"in_reply_to":"9a89bdaa_c27dc06f","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":819,"context_line":"iSCSI and multipath services."},{"line_number":820,"context_line":".. code-block:: console"},{"line_number":821,"context_line":""},{"line_number":822,"context_line":"   $ sudo service open-iscsi restart"},{"line_number":823,"context_line":"   $ sudo service multipath-tools restart"},{"line_number":824,"context_line":""},{"line_number":825,"context_line":".. code-block:: console"},{"line_number":826,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a23b5c9b","line":823,"range":{"start_line":822,"start_character":0,"end_line":823,"end_character":41},"updated":"2016-09-06 13:22:56.000000000","message":"This is distro-specific. Add systemctl commands for other distros here?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":819,"context_line":"iSCSI and multipath services."},{"line_number":820,"context_line":".. code-block:: console"},{"line_number":821,"context_line":""},{"line_number":822,"context_line":"   $ sudo service open-iscsi restart"},{"line_number":823,"context_line":"   $ sudo service multipath-tools restart"},{"line_number":824,"context_line":""},{"line_number":825,"context_line":".. code-block:: console"},{"line_number":826,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_68b6933e","line":823,"range":{"start_line":822,"start_character":0,"end_line":823,"end_character":41},"in_reply_to":"9a89bdaa_a23b5c9b","updated":"2016-09-06 13:35:41.000000000","message":"Agreed","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":855,"context_line":"-------------------------------------------------------------------------"},{"line_number":856,"context_line":""},{"line_number":857,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":858,"context_line":"- Create an instance from image out of native LVM storage or from VMAX storage"},{"line_number":859,"context_line":"  e.g from a bootable volume"},{"line_number":860,"context_line":"- Attach the 3GB volume to the new instance"},{"line_number":861,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_620074ab","line":858,"range":{"start_line":858,"start_character":71,"end_line":858,"end_character":78},"updated":"2016-09-06 13:22:56.000000000","message":"Missing comma?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":855,"context_line":"-------------------------------------------------------------------------"},{"line_number":856,"context_line":""},{"line_number":857,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":858,"context_line":"- Create an instance from image out of native LVM storage or from VMAX storage"},{"line_number":859,"context_line":"  e.g from a bootable volume"},{"line_number":860,"context_line":"- Attach the 3GB volume to the new instance"},{"line_number":861,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_e8f703f3","line":858,"range":{"start_line":858,"start_character":71,"end_line":858,"end_character":78},"in_reply_to":"9a89bdaa_620074ab","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":868,"context_line":"     |- 33:0:0:1 sdb 8:16 active ready running"},{"line_number":869,"context_line":"     `- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":870,"context_line":""},{"line_number":871,"context_line":"Use lsblk command to see the multipath device."},{"line_number":872,"context_line":".. code-block:: console"},{"line_number":873,"context_line":""},{"line_number":874,"context_line":"   $ lsblk"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_621794ed","line":871,"range":{"start_line":871,"start_character":4,"end_line":871,"end_character":9},"updated":"2016-09-06 13:22:56.000000000","message":"the ``lsblk``","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":868,"context_line":"     |- 33:0:0:1 sdb 8:16 active ready running"},{"line_number":869,"context_line":"     `- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":870,"context_line":""},{"line_number":871,"context_line":"Use lsblk command to see the multipath device."},{"line_number":872,"context_line":".. code-block:: console"},{"line_number":873,"context_line":""},{"line_number":874,"context_line":"   $ lsblk"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_88d1175a","line":871,"range":{"start_line":871,"start_character":4,"end_line":871,"end_character":9},"in_reply_to":"9a89bdaa_621794ed","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":881,"context_line":""},{"line_number":882,"context_line":"Consistency Group Support"},{"line_number":883,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":884,"context_line":"Consistency Groups operations are performed using CLI using v2 of Cinder API"},{"line_number":885,"context_line":""},{"line_number":886,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls for"},{"line_number":887,"context_line":"Consistency groups"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_e2af2492","line":884,"range":{"start_line":884,"start_character":44,"end_line":884,"end_character":53},"updated":"2016-09-06 13:22:56.000000000","message":"through the CLI?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":881,"context_line":""},{"line_number":882,"context_line":"Consistency Group Support"},{"line_number":883,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":884,"context_line":"Consistency Groups operations are performed using CLI using v2 of Cinder API"},{"line_number":885,"context_line":""},{"line_number":886,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls for"},{"line_number":887,"context_line":"Consistency groups"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_48c0ef7b","line":884,"range":{"start_line":884,"start_character":44,"end_line":884,"end_character":53},"in_reply_to":"9a89bdaa_e2af2492","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":993,"context_line":"provisioned, and all of the pools are created in containers called Storage"},{"line_number":994,"context_line":"Resource Pools (SRP). Typically there is only one SRP, however there can be"},{"line_number":995,"context_line":"more. Therefore, it is the same pool we will provision to but we can provide"},{"line_number":996,"context_line":"a different SLO/Workload combinations."},{"line_number":997,"context_line":""},{"line_number":998,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":999,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_a2e19cd2","line":996,"range":{"start_line":996,"start_character":0,"end_line":996,"end_character":1},"updated":"2016-09-06 13:22:56.000000000","message":"Remove the \"a\".","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":993,"context_line":"provisioned, and all of the pools are created in containers called Storage"},{"line_number":994,"context_line":"Resource Pools (SRP). Typically there is only one SRP, however there can be"},{"line_number":995,"context_line":"more. Therefore, it is the same pool we will provision to but we can provide"},{"line_number":996,"context_line":"a different SLO/Workload combinations."},{"line_number":997,"context_line":""},{"line_number":998,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":999,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_286f2b93","line":996,"range":{"start_line":996,"start_character":0,"end_line":996,"end_character":1},"in_reply_to":"9a89bdaa_a2e19cd2","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":998,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":999,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"},{"line_number":1000,"context_line":"that of the entire SRP. This can cause issues as it can never be an accurate"},{"line_number":1001,"context_line":"representation of what storage is available for any give SLO/Workload"},{"line_number":1002,"context_line":"combination."},{"line_number":1003,"context_line":""},{"line_number":1004,"context_line":"Enabling WLP on Unisphere"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_822c9803","line":1001,"range":{"start_line":1001,"start_character":52,"end_line":1001,"end_character":56},"updated":"2016-09-06 13:22:56.000000000","message":"given?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":998,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":999,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"},{"line_number":1000,"context_line":"that of the entire SRP. This can cause issues as it can never be an accurate"},{"line_number":1001,"context_line":"representation of what storage is available for any give SLO/Workload"},{"line_number":1002,"context_line":"combination."},{"line_number":1003,"context_line":""},{"line_number":1004,"context_line":"Enabling WLP on Unisphere"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_6869338b","line":1001,"range":{"start_line":1001,"start_character":52,"end_line":1001,"end_character":56},"in_reply_to":"9a89bdaa_822c9803","updated":"2016-09-06 13:35:41.000000000","message":"Yes","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_824bb886","line":1007,"range":{"start_line":1007,"start_character":41,"end_line":1007,"end_character":69},"updated":"2016-09-06 13:22:56.000000000","message":"I think this should use the syntax :menuselection:`array --\u003e Performance --\u003e Settings`","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_880677cc","line":1007,"range":{"start_line":1007,"start_character":41,"end_line":1007,"end_character":69},"in_reply_to":"9a89bdaa_824bb886","updated":"2016-09-06 13:35:41.000000000","message":"Agreed","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_c23ce0e4","line":1008,"range":{"start_line":1007,"start_character":71,"end_line":1008,"end_character":63},"updated":"2016-09-06 13:22:56.000000000","message":"I think this should be a proper procedure.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"d3f40413e6db8c52b22ca1938022db0cb12eccc6","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_7ced7424","line":1008,"range":{"start_line":1007,"start_character":71,"end_line":1008,"end_character":63},"in_reply_to":"9a89bdaa_68ee93ed","updated":"2016-09-06 13:48:05.000000000","message":"I mean I\u0027d turn this para into a list of steps.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"e0bb4753b9d1fc91bae14ec5e84d145d552db8e3","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_6b0688cf","line":1008,"range":{"start_line":1007,"start_character":71,"end_line":1008,"end_character":63},"in_reply_to":"9a89bdaa_7ced7424","updated":"2016-09-06 15:00:09.000000000","message":"Will do.  Thanks for the clarification","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1004,"context_line":"Enabling WLP on Unisphere"},{"line_number":1005,"context_line":"-------------------------"},{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_68ee93ed","line":1008,"range":{"start_line":1007,"start_character":71,"end_line":1008,"end_character":63},"in_reply_to":"9a89bdaa_c23ce0e4","updated":"2016-09-06 13:35:41.000000000","message":"Apologies, Not sure what you mean by proper procedure?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."},{"line_number":1012,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_622cf4ab","line":1009,"range":{"start_line":1009,"start_character":3,"end_line":1009,"end_character":8},"updated":"2016-09-06 13:22:56.000000000","message":"set up?","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1006,"context_line":""},{"line_number":1007,"context_line":"To enable WLP on Unisphere, click on the array-\u003ePerformance-\u003eSettings. Set"},{"line_number":1008,"context_line":"both the Real Time and the Root Cause Analysis. Click Register. This should"},{"line_number":1009,"context_line":"be setup ahead of time (allowing for several hours of data collection), so"},{"line_number":1010,"context_line":"that the Unisphere for VMAX Performance Analyzer can collect ratedmetrics for"},{"line_number":1011,"context_line":"each of the supported ElementTypes."},{"line_number":1012,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_28cbab73","line":1009,"range":{"start_line":1009,"start_character":3,"end_line":1009,"end_character":8},"in_reply_to":"9a89bdaa_622cf4ab","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1012,"context_line":""},{"line_number":1013,"context_line":"Using TestSmiProvider to add Statistics Access Point"},{"line_number":1014,"context_line":"----------------------------------------------------"},{"line_number":1015,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1016,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1017,"context_line":"# Navigate to the Active menu."},{"line_number":1018,"context_line":"# Type reg and enter the noted responses to the questions:"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_4d1f215f","line":1015,"updated":"2016-09-06 13:22:56.000000000","message":"Add an empty line here.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1012,"context_line":""},{"line_number":1013,"context_line":"Using TestSmiProvider to add Statistics Access Point"},{"line_number":1014,"context_line":"----------------------------------------------------"},{"line_number":1015,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1016,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1017,"context_line":"# Navigate to the Active menu."},{"line_number":1018,"context_line":"# Type reg and enter the noted responses to the questions:"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_88a2f7ac","line":1015,"in_reply_to":"9a89bdaa_4d1f215f","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1014,"context_line":"----------------------------------------------------"},{"line_number":1015,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1016,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1017,"context_line":"# Navigate to the Active menu."},{"line_number":1018,"context_line":"# Type reg and enter the noted responses to the questions:"},{"line_number":1019,"context_line":""},{"line_number":1020,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_ed72b5ac","line":1017,"range":{"start_line":1017,"start_character":18,"end_line":1017,"end_character":24},"updated":"2016-09-06 13:22:56.000000000","message":":guilabel:`Active`","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1015,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1016,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1017,"context_line":"# Navigate to the Active menu."},{"line_number":1018,"context_line":"# Type reg and enter the noted responses to the questions:"},{"line_number":1019,"context_line":""},{"line_number":1020,"context_line":".. code-block:: console"},{"line_number":1021,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_8d9cc9c1","line":1018,"range":{"start_line":1018,"start_character":7,"end_line":1018,"end_character":10},"updated":"2016-09-06 13:22:56.000000000","message":"This should use some markup.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1015,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1016,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1017,"context_line":"# Navigate to the Active menu."},{"line_number":1018,"context_line":"# Type reg and enter the noted responses to the questions:"},{"line_number":1019,"context_line":""},{"line_number":1020,"context_line":".. code-block:: console"},{"line_number":1021,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_0897c748","line":1018,"range":{"start_line":1018,"start_character":7,"end_line":1018,"end_character":10},"in_reply_to":"9a89bdaa_8d9cc9c1","updated":"2016-09-06 13:35:41.000000000","message":"Ok","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"487656b57e9558b617993a2cb3286a04924180e5","unresolved":false,"context_lines":[{"line_number":1033,"context_line":"   Password [smc]: ?"},{"line_number":1034,"context_line":"   Note: Enter the Unisphere for VMAX password."},{"line_number":1035,"context_line":""},{"line_number":1036,"context_line":"# Type reg again to view the current list"},{"line_number":1037,"context_line":""},{"line_number":1038,"context_line":".. code-block:: console"},{"line_number":1039,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_eda9d5e0","line":1036,"range":{"start_line":1036,"start_character":11,"end_line":1036,"end_character":16},"updated":"2016-09-06 13:22:56.000000000","message":"Ditto.","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"648fde4164796d326b9e21c230c03cc7831addaf","unresolved":false,"context_lines":[{"line_number":1033,"context_line":"   Password [smc]: ?"},{"line_number":1034,"context_line":"   Note: Enter the Unisphere for VMAX password."},{"line_number":1035,"context_line":""},{"line_number":1036,"context_line":"# Type reg again to view the current list"},{"line_number":1037,"context_line":""},{"line_number":1038,"context_line":".. code-block:: console"},{"line_number":1039,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"9a89bdaa_6873f34d","line":1036,"range":{"start_line":1036,"start_character":11,"end_line":1036,"end_character":16},"in_reply_to":"9a89bdaa_eda9d5e0","updated":"2016-09-06 13:35:41.000000000","message":"Ok. Thank you for the great feedback","commit_id":"d9d24492eaf9dca6369d077cb2370790b9ffbae9"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":372,"context_line":"attached over iSCSI or ``F`` for volumes attached over Fiber Channel."},{"line_number":373,"context_line":""},{"line_number":374,"context_line":"VMAX2"},{"line_number":375,"context_line":".. code-block:: none"},{"line_number":376,"context_line":""},{"line_number":377,"context_line":"   OS-[shortHostName]-[poolName]-[protocol]-MV"},{"line_number":378,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e8797e83","line":375,"range":{"start_line":375,"start_character":0,"end_line":375,"end_character":20},"updated":"2016-09-07 14:28:55.000000000","message":"code-block needs a blank line separator.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":372,"context_line":"attached over iSCSI or ``F`` for volumes attached over Fiber Channel."},{"line_number":373,"context_line":""},{"line_number":374,"context_line":"VMAX2"},{"line_number":375,"context_line":".. code-block:: none"},{"line_number":376,"context_line":""},{"line_number":377,"context_line":"   OS-[shortHostName]-[poolName]-[protocol]-MV"},{"line_number":378,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_a3d15959","line":375,"range":{"start_line":375,"start_character":0,"end_line":375,"end_character":20},"in_reply_to":"9a89bdaa_e8797e83","updated":"2016-09-07 14:36:51.000000000","message":"Sure","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."},{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server:"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_f4d31dd3","line":469,"range":{"start_line":469,"start_character":0,"end_line":469,"end_character":44},"updated":"2016-09-07 14:28:55.000000000","message":"The steps like this one should be formatted as:\n\n#. Get the CA certificate of the ECOM server:","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":466,"context_line":""},{"line_number":467,"context_line":"The ECOM component of Solutions Enable 8.2 enforces SSL."},{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server:"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_a33879a1","line":469,"range":{"start_line":469,"start_character":0,"end_line":469,"end_character":44},"in_reply_to":"9a89bdaa_f4d31dd3","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server:"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""},{"line_number":473,"context_line":"      $ openssl s_client -showcerts -connect \u003cecom_hostname\u003e.lss.emc.com:5989 \u003c/dev/null"},{"line_number":474,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_484a6a27","line":471,"range":{"start_line":471,"start_character":0,"end_line":471,"end_character":3},"updated":"2016-09-07 14:28:55.000000000","message":"I think you have too many spaces here. Check the output.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":468,"context_line":""},{"line_number":469,"context_line":"- Get the CA certificate of the ECOM server:"},{"line_number":470,"context_line":""},{"line_number":471,"context_line":"   .. code-block:: console"},{"line_number":472,"context_line":""},{"line_number":473,"context_line":"      $ openssl s_client -showcerts -connect \u003cecom_hostname\u003e.lss.emc.com:5989 \u003c/dev/null"},{"line_number":474,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e33e018a","line":471,"range":{"start_line":471,"start_character":0,"end_line":471,"end_character":3},"in_reply_to":"9a89bdaa_484a6a27","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":485,"context_line":"      $ sudo dpkg-reconfigure ca-certificates"},{"line_number":486,"context_line":"      $ sudo dpkg-reconfigure ca-certificates"},{"line_number":487,"context_line":""},{"line_number":488,"context_line":"- Update cinder.conf to reflect SSL functionality by adding the following to"},{"line_number":489,"context_line":"  the backend block:"},{"line_number":490,"context_line":""},{"line_number":491,"context_line":"   .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_d49c5910","line":488,"range":{"start_line":488,"start_character":9,"end_line":488,"end_character":20},"updated":"2016-09-07 14:28:55.000000000","message":"``cinder.conf``","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":485,"context_line":"      $ sudo dpkg-reconfigure ca-certificates"},{"line_number":486,"context_line":"      $ sudo dpkg-reconfigure ca-certificates"},{"line_number":487,"context_line":""},{"line_number":488,"context_line":"- Update cinder.conf to reflect SSL functionality by adding the following to"},{"line_number":489,"context_line":"  the backend block:"},{"line_number":490,"context_line":""},{"line_number":491,"context_line":"   .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_434a4d27","line":488,"range":{"start_line":488,"start_character":9,"end_line":488,"end_character":20},"in_reply_to":"9a89bdaa_d49c5910","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":494,"context_line":"      driver_use_ssl \u003d True"},{"line_number":495,"context_line":"      driver_ssl_cert_path \u003d /opt/stack/irco2sd20vm5.lss.emc.com.pem (Optional if Step 3 and 4 are skipped)"},{"line_number":496,"context_line":""},{"line_number":497,"context_line":"- Update the ``/etc/cinder/cinder_emc_config_\u003cconf_group\u003e.xml``:"},{"line_number":498,"context_line":"  Update EcomServerIp to Ecom host name"},{"line_number":499,"context_line":"  Update EcomServerPort to 5989"},{"line_number":500,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_14040148","line":497,"updated":"2016-09-07 14:28:55.000000000","message":"file?","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":494,"context_line":"      driver_use_ssl \u003d True"},{"line_number":495,"context_line":"      driver_ssl_cert_path \u003d /opt/stack/irco2sd20vm5.lss.emc.com.pem (Optional if Step 3 and 4 are skipped)"},{"line_number":496,"context_line":""},{"line_number":497,"context_line":"- Update the ``/etc/cinder/cinder_emc_config_\u003cconf_group\u003e.xml``:"},{"line_number":498,"context_line":"  Update EcomServerIp to Ecom host name"},{"line_number":499,"context_line":"  Update EcomServerPort to 5989"},{"line_number":500,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c3649dba","line":497,"in_reply_to":"9a89bdaa_14040148","updated":"2016-09-07 14:36:51.000000000","message":"Yes it is","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":495,"context_line":"      driver_ssl_cert_path \u003d /opt/stack/irco2sd20vm5.lss.emc.com.pem (Optional if Step 3 and 4 are skipped)"},{"line_number":496,"context_line":""},{"line_number":497,"context_line":"- Update the ``/etc/cinder/cinder_emc_config_\u003cconf_group\u003e.xml``:"},{"line_number":498,"context_line":"  Update EcomServerIp to Ecom host name"},{"line_number":499,"context_line":"  Update EcomServerPort to 5989"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":""},{"line_number":502,"context_line":"Oversubscription Support"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_88fe32ac","line":499,"range":{"start_line":498,"start_character":0,"end_line":499,"end_character":31},"updated":"2016-09-07 14:28:55.000000000","message":"These should start with:\n\n#.\n\nAnd end with a period.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":495,"context_line":"      driver_ssl_cert_path \u003d /opt/stack/irco2sd20vm5.lss.emc.com.pem (Optional if Step 3 and 4 are skipped)"},{"line_number":496,"context_line":""},{"line_number":497,"context_line":"- Update the ``/etc/cinder/cinder_emc_config_\u003cconf_group\u003e.xml``:"},{"line_number":498,"context_line":"  Update EcomServerIp to Ecom host name"},{"line_number":499,"context_line":"  Update EcomServerPort to 5989"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":""},{"line_number":502,"context_line":"Oversubscription Support"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_636af182","line":499,"range":{"start_line":498,"start_character":0,"end_line":499,"end_character":31},"in_reply_to":"9a89bdaa_88fe32ac","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":533,"context_line":"that a pool can be oversubscribed."},{"line_number":534,"context_line":""},{"line_number":535,"context_line":""},{"line_number":536,"context_line":"``Scenario 1`` - EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":537,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription is"},{"line_number":538,"context_line":"200%."},{"line_number":539,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_089ce25b","line":536,"range":{"start_line":536,"start_character":1,"end_line":536,"end_character":14},"updated":"2016-09-07 14:28:55.000000000","message":"This would look better as a heading. Or, make it **bold**, not ``literal``.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":533,"context_line":"that a pool can be oversubscribed."},{"line_number":534,"context_line":""},{"line_number":535,"context_line":""},{"line_number":536,"context_line":"``Scenario 1`` - EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":537,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription is"},{"line_number":538,"context_line":"200%."},{"line_number":539,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e30c41ee","line":536,"range":{"start_line":536,"start_character":1,"end_line":536,"end_character":14},"in_reply_to":"9a89bdaa_089ce25b","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":693,"context_line":"    Key               Value"},{"line_number":694,"context_line":"    DistributionType  Always"},{"line_number":695,"context_line":""},{"line_number":696,"context_line":"``Step 1.``"},{"line_number":697,"context_line":"Create QOS Specs with the prerequisite values above"},{"line_number":698,"context_line":"cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":699,"context_line":""},{"line_number":700,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_77b9cf14","line":697,"range":{"start_line":696,"start_character":0,"end_line":697,"end_character":51},"updated":"2016-09-07 14:28:55.000000000","message":"I\u0027d format this as:\n\n#. Create QOS Specs with the prerequisite values above:\n\nSame for the following steps.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":693,"context_line":"    Key               Value"},{"line_number":694,"context_line":"    DistributionType  Always"},{"line_number":695,"context_line":""},{"line_number":696,"context_line":"``Step 1.``"},{"line_number":697,"context_line":"Create QOS Specs with the prerequisite values above"},{"line_number":698,"context_line":"cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":699,"context_line":""},{"line_number":700,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_43f88dc3","line":697,"range":{"start_line":696,"start_character":0,"end_line":697,"end_character":51},"in_reply_to":"9a89bdaa_77b9cf14","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":695,"context_line":""},{"line_number":696,"context_line":"``Step 1.``"},{"line_number":697,"context_line":"Create QOS Specs with the prerequisite values above"},{"line_number":698,"context_line":"cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":699,"context_line":""},{"line_number":700,"context_line":".. code-block:: console"},{"line_number":701,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_17b16347","line":698,"range":{"start_line":698,"start_character":0,"end_line":698,"end_character":54},"updated":"2016-09-07 14:28:55.000000000","message":"Should these commands be included in code-block as well?\n\nMaybe something like this:\n\nSynopsis:\n\n.. code-block:: console\n\n   cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":695,"context_line":""},{"line_number":696,"context_line":"``Step 1.``"},{"line_number":697,"context_line":"Create QOS Specs with the prerequisite values above"},{"line_number":698,"context_line":"cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":699,"context_line":""},{"line_number":700,"context_line":".. code-block:: console"},{"line_number":701,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_03292537","line":698,"range":{"start_line":698,"start_character":0,"end_line":698,"end_character":54},"in_reply_to":"9a89bdaa_17b16347","updated":"2016-09-07 14:36:51.000000000","message":"Yes, I was thinking that myself. Might look neater","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":781,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":782,"context_line":""},{"line_number":783,"context_line":"On Ubuntu:"},{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c80afa89","line":784,"range":{"start_line":784,"start_character":0,"end_line":784,"end_character":23},"updated":"2016-09-07 14:28:55.000000000","message":"Blank line missing here.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":781,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":782,"context_line":""},{"line_number":783,"context_line":"On Ubuntu:"},{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_2322a952","line":784,"range":{"start_line":784,"start_character":0,"end_line":784,"end_character":23},"in_reply_to":"9a89bdaa_c80afa89","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":783,"context_line":"On Ubuntu:"},{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_b731975c","line":786,"range":{"start_line":786,"start_character":37,"end_line":786,"end_character":64},"updated":"2016-09-07 14:28:55.000000000","message":"# ensures iSCSI is installed","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":783,"context_line":"On Ubuntu:"},{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_6318311f","line":786,"range":{"start_line":786,"start_character":37,"end_line":786,"end_character":64},"in_reply_to":"9a89bdaa_b731975c","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":790,"context_line":""},{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_d757fb57","line":789,"range":{"start_line":787,"start_character":0,"end_line":789,"end_character":48},"updated":"2016-09-07 14:28:55.000000000","message":"Comments have to be prefixed with a #","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":784,"context_line":".. code-block:: console"},{"line_number":785,"context_line":""},{"line_number":786,"context_line":"   $ sudo apt-get install open-iscsi (ensure iSCSI is installed)"},{"line_number":787,"context_line":"   $ sudo apt-get install multipath-tools(multipath modules)"},{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":790,"context_line":""},{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e3da814a","line":789,"range":{"start_line":787,"start_character":0,"end_line":789,"end_character":48},"in_reply_to":"9a89bdaa_d757fb57","updated":"2016-09-07 14:36:51.000000000","message":"ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":790,"context_line":""},{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"},{"line_number":793,"context_line":""},{"line_number":794,"context_line":"   $ zipper install open-iscsi (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_37d027f6","line":791,"range":{"start_line":791,"start_character":0,"end_line":791,"end_character":8},"updated":"2016-09-07 14:28:55.000000000","message":"I\u0027d use the same distro names as here:\n\nhttp://docs.openstack.org/project-install-guide/draft/\n\nopenSUSE and SUSE Linux Enterprise Server","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":788,"context_line":"   $ sudo apt-get install sysfsutils sg3-utils (file system utilities)"},{"line_number":789,"context_line":"   $ sudo apt-get install scsitools (SCSI tools)"},{"line_number":790,"context_line":""},{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"},{"line_number":793,"context_line":""},{"line_number":794,"context_line":"   $ zipper install open-iscsi (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c3c01d53","line":791,"range":{"start_line":791,"start_character":0,"end_line":791,"end_character":8},"in_reply_to":"9a89bdaa_37d027f6","updated":"2016-09-07 14:36:51.000000000","message":"Sure","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"},{"line_number":793,"context_line":""},{"line_number":794,"context_line":"   $ zipper install open-iscsi (ensure iSCSI is installed)"},{"line_number":795,"context_line":"   $ zipper install multipath-tools (multipath modules)"},{"line_number":796,"context_line":"   $ zipper install sysfsutils sg3-utils (file system utilities)"},{"line_number":797,"context_line":"   $ zipper install scsitools (SCSI tools)"},{"line_number":798,"context_line":""},{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_b79b5717","line":797,"range":{"start_line":794,"start_character":0,"end_line":797,"end_character":42},"updated":"2016-09-07 14:28:55.000000000","message":"Same as above.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":791,"context_line":"On SUSE:"},{"line_number":792,"context_line":".. code-block:: console"},{"line_number":793,"context_line":""},{"line_number":794,"context_line":"   $ zipper install open-iscsi (ensure iSCSI is installed)"},{"line_number":795,"context_line":"   $ zipper install multipath-tools (multipath modules)"},{"line_number":796,"context_line":"   $ zipper install sysfsutils sg3-utils (file system utilities)"},{"line_number":797,"context_line":"   $ zipper install scsitools (SCSI tools)"},{"line_number":798,"context_line":""},{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_83c37556","line":797,"range":{"start_line":794,"start_character":0,"end_line":797,"end_character":42},"in_reply_to":"9a89bdaa_b79b5717","updated":"2016-09-07 14:36:51.000000000","message":"Sure","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":796,"context_line":"   $ zipper install sysfsutils sg3-utils (file system utilities)"},{"line_number":797,"context_line":"   $ zipper install scsitools (SCSI tools)"},{"line_number":798,"context_line":""},{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"},{"line_number":801,"context_line":""},{"line_number":802,"context_line":"   $ yum install iscsi-initiator-utils (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_9705737b","line":799,"range":{"start_line":799,"start_character":3,"end_line":799,"end_character":9},"updated":"2016-09-07 14:28:55.000000000","message":"I\u0027d use the same distro names as here:\n\nhttp://docs.openstack.org/project-install-guide/draft/\n\nRed Hat Enterprise Linux and CentOS","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":796,"context_line":"   $ zipper install sysfsutils sg3-utils (file system utilities)"},{"line_number":797,"context_line":"   $ zipper install scsitools (SCSI tools)"},{"line_number":798,"context_line":""},{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"},{"line_number":801,"context_line":""},{"line_number":802,"context_line":"   $ yum install iscsi-initiator-utils (ensure iSCSI is installed)"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_03ae8597","line":799,"range":{"start_line":799,"start_character":3,"end_line":799,"end_character":9},"in_reply_to":"9a89bdaa_9705737b","updated":"2016-09-07 14:36:51.000000000","message":"Sure","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"},{"line_number":801,"context_line":""},{"line_number":802,"context_line":"   $ yum install iscsi-initiator-utils (ensure iSCSI is installed)"},{"line_number":803,"context_line":"   $ yum install device-mapper-multipath (multipath modules)"},{"line_number":804,"context_line":"   $ yum install sysfsutils sg3-utils (file system utilities)"},{"line_number":805,"context_line":"   $ yum install scsitools (SCSI tools)"},{"line_number":806,"context_line":""},{"line_number":807,"context_line":""},{"line_number":808,"context_line":"Multipath configuration file"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_778e2fd1","line":805,"range":{"start_line":802,"start_character":0,"end_line":805,"end_character":39},"updated":"2016-09-07 14:28:55.000000000","message":"Same as above.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":799,"context_line":"On RedHat"},{"line_number":800,"context_line":".. code-block:: console"},{"line_number":801,"context_line":""},{"line_number":802,"context_line":"   $ yum install iscsi-initiator-utils (ensure iSCSI is installed)"},{"line_number":803,"context_line":"   $ yum install device-mapper-multipath (multipath modules)"},{"line_number":804,"context_line":"   $ yum install sysfsutils sg3-utils (file system utilities)"},{"line_number":805,"context_line":"   $ yum install scsitools (SCSI tools)"},{"line_number":806,"context_line":""},{"line_number":807,"context_line":""},{"line_number":808,"context_line":"Multipath configuration file"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_639d9165","line":805,"range":{"start_line":802,"start_character":0,"end_line":805,"end_character":39},"in_reply_to":"9a89bdaa_778e2fd1","updated":"2016-09-07 14:36:51.000000000","message":"Sure","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":835,"context_line":""},{"line_number":836,"context_line":"You may need to reboot the host after installing the MPIO tools or restart"},{"line_number":837,"context_line":"iSCSI and multipath services."},{"line_number":838,"context_line":"On Ubuntu:"},{"line_number":839,"context_line":""},{"line_number":840,"context_line":".. code-block:: console"},{"line_number":841,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_1727a3ca","line":838,"range":{"start_line":838,"start_character":0,"end_line":838,"end_character":10},"updated":"2016-09-07 14:28:55.000000000","message":"Needs an empty line separator.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":835,"context_line":""},{"line_number":836,"context_line":"You may need to reboot the host after installing the MPIO tools or restart"},{"line_number":837,"context_line":"iSCSI and multipath services."},{"line_number":838,"context_line":"On Ubuntu:"},{"line_number":839,"context_line":""},{"line_number":840,"context_line":".. code-block:: console"},{"line_number":841,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e37fe114","line":838,"range":{"start_line":838,"start_character":0,"end_line":838,"end_character":10},"in_reply_to":"9a89bdaa_1727a3ca","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":842,"context_line":"   $ sudo service open-iscsi restart"},{"line_number":843,"context_line":"   $ sudo service multipath-tools restart"},{"line_number":844,"context_line":""},{"line_number":845,"context_line":"On SUSE and Redhat:"},{"line_number":846,"context_line":""},{"line_number":847,"context_line":".. code-block:: console"},{"line_number":848,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_7701cf05","line":845,"range":{"start_line":845,"start_character":0,"end_line":845,"end_character":19},"updated":"2016-09-07 14:28:55.000000000","message":"See above for official distro names.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":842,"context_line":"   $ sudo service open-iscsi restart"},{"line_number":843,"context_line":"   $ sudo service multipath-tools restart"},{"line_number":844,"context_line":""},{"line_number":845,"context_line":"On SUSE and Redhat:"},{"line_number":846,"context_line":""},{"line_number":847,"context_line":".. code-block:: console"},{"line_number":848,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_0385a505","line":845,"range":{"start_line":845,"start_character":0,"end_line":845,"end_character":19},"in_reply_to":"9a89bdaa_7701cf05","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":864,"context_line":"------------------------"},{"line_number":865,"context_line":""},{"line_number":866,"context_line":"On Nova compute node, add the following flag in the ``[libvirt]`` section of"},{"line_number":867,"context_line":"``/etc/nova/nova.conf``"},{"line_number":868,"context_line":""},{"line_number":869,"context_line":".. code-block:: ini"},{"line_number":870,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_080f8288","line":867,"updated":"2016-09-07 14:28:55.000000000","message":"Colon here?","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":864,"context_line":"------------------------"},{"line_number":865,"context_line":""},{"line_number":866,"context_line":"On Nova compute node, add the following flag in the ``[libvirt]`` section of"},{"line_number":867,"context_line":"``/etc/nova/nova.conf``"},{"line_number":868,"context_line":""},{"line_number":869,"context_line":".. code-block:: ini"},{"line_number":870,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_a3907944","line":867,"in_reply_to":"9a89bdaa_080f8288","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":882,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":883,"context_line":"-------------------------------------------------------------------------"},{"line_number":884,"context_line":""},{"line_number":885,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":886,"context_line":"- Create an instance from image out of native LVM storage or from VMAX"},{"line_number":887,"context_line":"  storage, e.g from a bootable volume"},{"line_number":888,"context_line":"- Attach the 3GB volume to the new instance"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_ca23d256","line":885,"range":{"start_line":885,"start_character":0,"end_line":885,"end_character":27},"updated":"2016-09-07 14:28:55.000000000","message":"#. Create a 3GB VMAX3 volume.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":882,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":883,"context_line":"-------------------------------------------------------------------------"},{"line_number":884,"context_line":""},{"line_number":885,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":886,"context_line":"- Create an instance from image out of native LVM storage or from VMAX"},{"line_number":887,"context_line":"  storage, e.g from a bootable volume"},{"line_number":888,"context_line":"- Attach the 3GB volume to the new instance"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c3957d33","line":885,"range":{"start_line":885,"start_character":0,"end_line":885,"end_character":27},"in_reply_to":"9a89bdaa_ca23d256","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":885,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":886,"context_line":"- Create an instance from image out of native LVM storage or from VMAX"},{"line_number":887,"context_line":"  storage, e.g from a bootable volume"},{"line_number":888,"context_line":"- Attach the 3GB volume to the new instance"},{"line_number":889,"context_line":""},{"line_number":890,"context_line":".. code-block:: console"},{"line_number":891,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_2ae6fe14","line":888,"range":{"start_line":888,"start_character":17,"end_line":888,"end_character":23},"updated":"2016-09-07 14:28:55.000000000","message":"#. Attach the 3GB volume to the new instance:","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":885,"context_line":"- Create a 3GB VMAX3 volume"},{"line_number":886,"context_line":"- Create an instance from image out of native LVM storage or from VMAX"},{"line_number":887,"context_line":"  storage, e.g from a bootable volume"},{"line_number":888,"context_line":"- Attach the 3GB volume to the new instance"},{"line_number":889,"context_line":""},{"line_number":890,"context_line":".. code-block:: console"},{"line_number":891,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_a3b799d6","line":888,"range":{"start_line":888,"start_character":17,"end_line":888,"end_character":23},"in_reply_to":"9a89bdaa_2ae6fe14","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":896,"context_line":"     |- 33:0:0:1 sdb 8:16 active ready running"},{"line_number":897,"context_line":"     `- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":898,"context_line":""},{"line_number":899,"context_line":"Use ``lsblk`` command to see the multipath device."},{"line_number":900,"context_line":".. code-block:: console"},{"line_number":901,"context_line":""},{"line_number":902,"context_line":"   $ lsblk"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_aac04e51","line":899,"range":{"start_line":899,"start_character":0,"end_line":899,"end_character":12},"updated":"2016-09-07 14:28:55.000000000","message":"Use the ``lsblk`...","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":896,"context_line":"     |- 33:0:0:1 sdb 8:16 active ready running"},{"line_number":897,"context_line":"     `- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":898,"context_line":""},{"line_number":899,"context_line":"Use ``lsblk`` command to see the multipath device."},{"line_number":900,"context_line":".. code-block:: console"},{"line_number":901,"context_line":""},{"line_number":902,"context_line":"   $ lsblk"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e3ad2185","line":899,"range":{"start_line":899,"start_character":0,"end_line":899,"end_character":12},"in_reply_to":"9a89bdaa_aac04e51","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":909,"context_line":""},{"line_number":910,"context_line":"Consistency Group Support"},{"line_number":911,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":912,"context_line":"Consistency Groups operations are performed through the  CLI using v2 of"},{"line_number":913,"context_line":"Cinder API"},{"line_number":914,"context_line":""},{"line_number":915,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_6a71e643","line":912,"range":{"start_line":912,"start_character":55,"end_line":912,"end_character":57},"updated":"2016-09-07 14:28:55.000000000","message":"Two spaces here.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":909,"context_line":""},{"line_number":910,"context_line":"Consistency Group Support"},{"line_number":911,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":912,"context_line":"Consistency Groups operations are performed through the  CLI using v2 of"},{"line_number":913,"context_line":"Cinder API"},{"line_number":914,"context_line":""},{"line_number":915,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_63c2f135","line":912,"range":{"start_line":912,"start_character":55,"end_line":912,"end_character":57},"in_reply_to":"9a89bdaa_6a71e643","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":924,"context_line":"Operations"},{"line_number":925,"context_line":"----------"},{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_eab256e4","line":927,"range":{"start_line":927,"start_character":0,"end_line":927,"end_character":28},"updated":"2016-09-07 14:28:55.000000000","message":"#. Create a Consistency Group.\n\nSame for the rest of the section.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":924,"context_line":"Operations"},{"line_number":925,"context_line":"----------"},{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_e3e441e1","line":927,"range":{"start_line":927,"start_character":0,"end_line":927,"end_character":28},"in_reply_to":"9a89bdaa_eab256e4","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":925,"context_line":"----------"},{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":931,"context_line":"\u003cvolume-types\u003e"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_aae3eed7","line":928,"range":{"start_line":928,"start_character":0,"end_line":928,"end_character":5},"updated":"2016-09-07 14:28:55.000000000","message":"This needs an empty line.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":925,"context_line":"----------"},{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":931,"context_line":"\u003cvolume-types\u003e"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_83d615ef","line":928,"range":{"start_line":928,"start_character":0,"end_line":928,"end_character":5},"in_reply_to":"9a89bdaa_aae3eed7","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":931,"context_line":"\u003cvolume-types\u003e"},{"line_number":932,"context_line":""},{"line_number":933,"context_line":".. code-block:: console"},{"line_number":934,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_8a7aaaef","line":931,"range":{"start_line":929,"start_character":0,"end_line":931,"end_character":14},"updated":"2016-09-07 14:28:55.000000000","message":"This would look better in a code-block. Needs to be separated by a blank line.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":926,"context_line":""},{"line_number":927,"context_line":"# Create a Consistency Group"},{"line_number":928,"context_line":"Usage:"},{"line_number":929,"context_line":"cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":930,"context_line":"[--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":931,"context_line":"\u003cvolume-types\u003e"},{"line_number":932,"context_line":""},{"line_number":933,"context_line":".. code-block:: console"},{"line_number":934,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c30add89","line":931,"range":{"start_line":929,"start_character":0,"end_line":931,"end_character":14},"in_reply_to":"9a89bdaa_8a7aaaef","updated":"2016-09-07 14:36:51.000000000","message":"Agreed","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":1043,"context_line":"Enabling WLP on Unisphere"},{"line_number":1044,"context_line":"-------------------------"},{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"- To enable WLP on Unisphere, click on the"},{"line_number":1047,"context_line":"  :menuselection:`array--\u003ePerformance--\u003eSettings`"},{"line_number":1048,"context_line":"- Set both the Real Time and the Root Cause Analysis"},{"line_number":1049,"context_line":"- Click Register"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_0d6f942b","line":1046,"range":{"start_line":1046,"start_character":0,"end_line":1046,"end_character":1},"updated":"2016-09-07 14:28:55.000000000","message":"Start the steps with:\n\n#.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":1043,"context_line":"Enabling WLP on Unisphere"},{"line_number":1044,"context_line":"-------------------------"},{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"- To enable WLP on Unisphere, click on the"},{"line_number":1047,"context_line":"  :menuselection:`array--\u003ePerformance--\u003eSettings`"},{"line_number":1048,"context_line":"- Set both the Real Time and the Root Cause Analysis"},{"line_number":1049,"context_line":"- Click Register"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_0301256a","line":1046,"range":{"start_line":1046,"start_character":0,"end_line":1046,"end_character":1},"in_reply_to":"9a89bdaa_0d6f942b","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"- To enable WLP on Unisphere, click on the"},{"line_number":1047,"context_line":"  :menuselection:`array--\u003ePerformance--\u003eSettings`"},{"line_number":1048,"context_line":"- Set both the Real Time and the Root Cause Analysis"},{"line_number":1049,"context_line":"- Click Register"},{"line_number":1050,"context_line":""},{"line_number":1051,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_0dddd4df","line":1048,"range":{"start_line":1048,"start_character":15,"end_line":1048,"end_character":24},"updated":"2016-09-07 14:28:55.000000000","message":"Is this a GUI element?\n\n:guilabel:`Real Time`","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"- To enable WLP on Unisphere, click on the"},{"line_number":1047,"context_line":"  :menuselection:`array--\u003ePerformance--\u003eSettings`"},{"line_number":1048,"context_line":"- Set both the Real Time and the Root Cause Analysis"},{"line_number":1049,"context_line":"- Click Register"},{"line_number":1050,"context_line":""},{"line_number":1051,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_83ed35b9","line":1048,"range":{"start_line":1048,"start_character":15,"end_line":1048,"end_character":24},"in_reply_to":"9a89bdaa_0dddd4df","updated":"2016-09-07 14:36:51.000000000","message":"I will check","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"c0689d6c7b118cdba20318d7e7a263609f81b6b7","unresolved":false,"context_lines":[{"line_number":1059,"context_line":""},{"line_number":1060,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1061,"context_line":""},{"line_number":1062,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1063,"context_line":"# Navigate to the :guilabel:`Active` menu."},{"line_number":1064,"context_line":"# Type ``reg`` and enter the noted responses to the questions:"},{"line_number":1065,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_ad3788fd","line":1062,"range":{"start_line":1062,"start_character":0,"end_line":1062,"end_character":1},"updated":"2016-09-07 14:28:55.000000000","message":"Start the steps with:\n\n#.","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"452898c8972e3f296a3ff4e52cafce14d3a243f9","unresolved":false,"context_lines":[{"line_number":1059,"context_line":""},{"line_number":1060,"context_line":"After enabling WLP you must then enable SMI-S to gain access to the WLP data:"},{"line_number":1061,"context_line":""},{"line_number":1062,"context_line":"# Connect to the SMI-S Provider using TestSmiProvider."},{"line_number":1063,"context_line":"# Navigate to the :guilabel:`Active` menu."},{"line_number":1064,"context_line":"# Type ``reg`` and enter the noted responses to the questions:"},{"line_number":1065,"context_line":""}],"source_content_type":"text/x-rst","patch_set":5,"id":"9a89bdaa_c331fd5b","line":1062,"range":{"start_line":1062,"start_character":0,"end_line":1062,"end_character":1},"in_reply_to":"9a89bdaa_ad3788fd","updated":"2016-09-07 14:36:51.000000000","message":"Ok","commit_id":"2f6c375776ac4d749f6791c40f51ce268746cc43"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":615,"context_line":""},{"line_number":616,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":617,"context_line":""},{"line_number":618,"context_line":"#. Associate qos specs with specified volume type."},{"line_number":619,"context_line":""},{"line_number":620,"context_line":"   Usage:"},{"line_number":621,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_01e7d812","line":618,"range":{"start_line":618,"start_character":3,"end_line":618,"end_character":50},"updated":"2016-09-09 15:55:31.000000000","message":"Associate QOS specs with the specified volume type.\n\nSame for the following sections.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":639,"context_line":""},{"line_number":640,"context_line":"       $ cinder create --name test_volume --volume-type 224b1517-4a23-44b5-9035-8d9e2c18fb70 1"},{"line_number":641,"context_line":""},{"line_number":642,"context_line":"``Outcome`` - VMAX (Storage Group)"},{"line_number":643,"context_line":"- Host I/O Limit (MB/Sec) -     4000"},{"line_number":644,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_e1867412","line":642,"range":{"start_line":642,"start_character":0,"end_line":642,"end_character":11},"updated":"2016-09-09 15:55:31.000000000","message":"Make it bold? Or, a heading.\n\nSame for the following sections.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":639,"context_line":""},{"line_number":640,"context_line":"       $ cinder create --name test_volume --volume-type 224b1517-4a23-44b5-9035-8d9e2c18fb70 1"},{"line_number":641,"context_line":""},{"line_number":642,"context_line":"``Outcome`` - VMAX (Storage Group)"},{"line_number":643,"context_line":"- Host I/O Limit (MB/Sec) -     4000"},{"line_number":644,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_3cf23f9b","line":642,"range":{"start_line":642,"start_character":0,"end_line":642,"end_character":11},"in_reply_to":"9a89bdaa_e1867412","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":640,"context_line":"       $ cinder create --name test_volume --volume-type 224b1517-4a23-44b5-9035-8d9e2c18fb70 1"},{"line_number":641,"context_line":""},{"line_number":642,"context_line":"``Outcome`` - VMAX (Storage Group)"},{"line_number":643,"context_line":"- Host I/O Limit (MB/Sec) -     4000"},{"line_number":644,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":646,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_a1938c4e","line":643,"range":{"start_line":643,"start_character":0,"end_line":643,"end_character":36},"updated":"2016-09-09 15:55:31.000000000","message":"Missing blank line.\n\nSame for the following sections.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":640,"context_line":"       $ cinder create --name test_volume --volume-type 224b1517-4a23-44b5-9035-8d9e2c18fb70 1"},{"line_number":641,"context_line":""},{"line_number":642,"context_line":"``Outcome`` - VMAX (Storage Group)"},{"line_number":643,"context_line":"- Host I/O Limit (MB/Sec) -     4000"},{"line_number":644,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":646,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_5cef03b0","line":643,"range":{"start_line":643,"start_character":0,"end_line":643,"end_character":36},"in_reply_to":"9a89bdaa_a1938c4e","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":646,"context_line":""},{"line_number":647,"context_line":"``Outcome`` - Cinder"},{"line_number":648,"context_line":"Volume is created against volume type and QOS is enforced with the parameters"},{"line_number":649,"context_line":"above."},{"line_number":650,"context_line":""},{"line_number":651,"context_line":"USE CASE 2 - Preset limits"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_01a3589f","line":648,"range":{"start_line":648,"start_character":0,"end_line":648,"end_character":77},"updated":"2016-09-09 15:55:31.000000000","message":"Missing blank line.\n\nSame for the following sections.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":645,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":646,"context_line":""},{"line_number":647,"context_line":"``Outcome`` - Cinder"},{"line_number":648,"context_line":"Volume is created against volume type and QOS is enforced with the parameters"},{"line_number":649,"context_line":"above."},{"line_number":650,"context_line":""},{"line_number":651,"context_line":"USE CASE 2 - Preset limits"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_9c2fcbf5","line":648,"range":{"start_line":648,"start_character":0,"end_line":648,"end_character":77},"in_reply_to":"9a89bdaa_01a3589f","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":792,"context_line":""},{"line_number":793,"context_line":"   Usage:"},{"line_number":794,"context_line":""},{"line_number":795,"context_line":"    .. code-block:: console"},{"line_number":796,"context_line":""},{"line_number":797,"context_line":"        cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":798,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_e1a3d44d","line":795,"range":{"start_line":795,"start_character":0,"end_line":795,"end_character":4},"updated":"2016-09-09 15:55:31.000000000","message":"Too many spaces here, see the checkbuild.\n\nSame for the other code-blocks.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"fd8fd97942d18baedeb3178b73a54419a2313c34","unresolved":false,"context_lines":[{"line_number":792,"context_line":""},{"line_number":793,"context_line":"   Usage:"},{"line_number":794,"context_line":""},{"line_number":795,"context_line":"    .. code-block:: console"},{"line_number":796,"context_line":""},{"line_number":797,"context_line":"        cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":798,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_e7ce84b3","line":795,"range":{"start_line":795,"start_character":0,"end_line":795,"end_character":4},"in_reply_to":"9a89bdaa_9c16eba5","updated":"2016-09-09 16:03:53.000000000","message":"Yeah, it does not print a warning but you can see the broken indentation in the build output:\n\nhttp://docs-draft.openstack.org/47/365547/8/check/gate-openstack-manuals-tox-doc-publish-checkbuild/f35d256//publish-docs/draft/config-reference/block-storage/drivers/emc-vmax-driver.html#use-case-4-preset-limits","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":792,"context_line":""},{"line_number":793,"context_line":"   Usage:"},{"line_number":794,"context_line":""},{"line_number":795,"context_line":"    .. code-block:: console"},{"line_number":796,"context_line":""},{"line_number":797,"context_line":"        cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":798,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_9c16eba5","line":795,"range":{"start_line":795,"start_character":0,"end_line":795,"end_character":4},"in_reply_to":"9a89bdaa_e1a3d44d","updated":"2016-09-09 15:58:42.000000000","message":"checkbuild did not complain here","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"a8daca7f32d41e5dc7723d21ed715de7a26ba053","unresolved":false,"context_lines":[{"line_number":792,"context_line":""},{"line_number":793,"context_line":"   Usage:"},{"line_number":794,"context_line":""},{"line_number":795,"context_line":"    .. code-block:: console"},{"line_number":796,"context_line":""},{"line_number":797,"context_line":"        cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":798,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_e75cc4ef","line":795,"range":{"start_line":795,"start_character":0,"end_line":795,"end_character":4},"in_reply_to":"9a89bdaa_e7ce84b3","updated":"2016-09-09 16:04:59.000000000","message":"Thank you.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":841,"context_line":"  software"},{"line_number":842,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":843,"context_line":""},{"line_number":844,"context_line":"On Ubuntu 14.04 (LTS):"},{"line_number":845,"context_line":""},{"line_number":846,"context_line":".. code-block:: console"},{"line_number":847,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_c13a50e7","line":844,"range":{"start_line":844,"start_character":10,"end_line":844,"end_character":21},"updated":"2016-09-09 15:55:31.000000000","message":"I\u0027d either specify a version for all distros or for none.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":841,"context_line":"  software"},{"line_number":842,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":843,"context_line":""},{"line_number":844,"context_line":"On Ubuntu 14.04 (LTS):"},{"line_number":845,"context_line":""},{"line_number":846,"context_line":".. code-block:: console"},{"line_number":847,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_9c7d0bea","line":844,"range":{"start_line":844,"start_character":10,"end_line":844,"end_character":21},"in_reply_to":"9a89bdaa_c13a50e7","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":854,"context_line":""},{"line_number":855,"context_line":".. code-block:: console"},{"line_number":856,"context_line":""},{"line_number":857,"context_line":"   $ zipper install open-iscsi           #ensure iSCSI is installed"},{"line_number":858,"context_line":"   $ zipper install multipath-tools      #multipath modules"},{"line_number":859,"context_line":"   $ zipper install sysfsutils sg3-utils #file system utilities"},{"line_number":860,"context_line":"   $ zipper install scsitools            #SCSI tools"},{"line_number":861,"context_line":""},{"line_number":862,"context_line":"On Red Hat Enterprise Linux and CentOS:"},{"line_number":863,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_617ee4af","line":860,"range":{"start_line":857,"start_character":0,"end_line":860,"end_character":52},"updated":"2016-09-09 15:55:31.000000000","message":"These require sudo too I think.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":854,"context_line":""},{"line_number":855,"context_line":".. code-block:: console"},{"line_number":856,"context_line":""},{"line_number":857,"context_line":"   $ zipper install open-iscsi           #ensure iSCSI is installed"},{"line_number":858,"context_line":"   $ zipper install multipath-tools      #multipath modules"},{"line_number":859,"context_line":"   $ zipper install sysfsutils sg3-utils #file system utilities"},{"line_number":860,"context_line":"   $ zipper install scsitools            #SCSI tools"},{"line_number":861,"context_line":""},{"line_number":862,"context_line":"On Red Hat Enterprise Linux and CentOS:"},{"line_number":863,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_dc8793d5","line":860,"range":{"start_line":857,"start_character":0,"end_line":860,"end_character":52},"in_reply_to":"9a89bdaa_617ee4af","updated":"2016-09-09 15:58:42.000000000","message":"yes","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":863,"context_line":""},{"line_number":864,"context_line":".. code-block:: console"},{"line_number":865,"context_line":""},{"line_number":866,"context_line":"   $ yum install iscsi-initiator-utils   #ensure iSCSI is installed"},{"line_number":867,"context_line":"   $ yum install device-mapper-multipath #multipath modules"},{"line_number":868,"context_line":"   $ yum install sysfsutils sg3-utils    #file system utilities"},{"line_number":869,"context_line":"   $ yum install scsitools               #SCSI tools"},{"line_number":870,"context_line":""},{"line_number":871,"context_line":""},{"line_number":872,"context_line":"Multipath configuration file"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_e148348a","line":869,"range":{"start_line":866,"start_character":0,"end_line":869,"end_character":52},"updated":"2016-09-09 15:55:31.000000000","message":"These require sudo too I think.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":863,"context_line":""},{"line_number":864,"context_line":".. code-block:: console"},{"line_number":865,"context_line":""},{"line_number":866,"context_line":"   $ yum install iscsi-initiator-utils   #ensure iSCSI is installed"},{"line_number":867,"context_line":"   $ yum install device-mapper-multipath #multipath modules"},{"line_number":868,"context_line":"   $ yum install sysfsutils sg3-utils    #file system utilities"},{"line_number":869,"context_line":"   $ yum install scsitools               #SCSI tools"},{"line_number":870,"context_line":""},{"line_number":871,"context_line":""},{"line_number":872,"context_line":"Multipath configuration file"}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_fc6c5738","line":869,"range":{"start_line":866,"start_character":0,"end_line":869,"end_character":52},"in_reply_to":"9a89bdaa_e148348a","updated":"2016-09-09 15:58:42.000000000","message":"yes","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":899,"context_line":""},{"line_number":900,"context_line":"You may need to reboot the host after installing the MPIO tools or restart"},{"line_number":901,"context_line":"iSCSI and multipath services."},{"line_number":902,"context_line":"On Ubuntu 14.04 (LTS):"},{"line_number":903,"context_line":""},{"line_number":904,"context_line":".. code-block:: console"},{"line_number":905,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_fc67f7e7","line":902,"updated":"2016-09-09 15:55:31.000000000","message":"Missing blank line.","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":899,"context_line":""},{"line_number":900,"context_line":"You may need to reboot the host after installing the MPIO tools or restart"},{"line_number":901,"context_line":"iSCSI and multipath services."},{"line_number":902,"context_line":"On Ubuntu 14.04 (LTS):"},{"line_number":903,"context_line":""},{"line_number":904,"context_line":".. code-block:: console"},{"line_number":905,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_7c5f6775","line":902,"in_reply_to":"9a89bdaa_fc67f7e7","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"02f9d7fa819bd0abe55af72c4c942b5fa94125f1","unresolved":false,"context_lines":[{"line_number":1146,"context_line":"#. To enable WLP on Unisphere, click on the"},{"line_number":1147,"context_line":"   :menuselection:`array--\u003ePerformance--\u003eSettings`."},{"line_number":1148,"context_line":"#. Set both the :guilabel:`Real Time` and the :guilabel:`Root Cause Analysis`."},{"line_number":1149,"context_line":"#. Click Register."},{"line_number":1150,"context_line":""},{"line_number":1151,"context_line":".. note::"},{"line_number":1152,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_9c3b4b9c","line":1149,"range":{"start_line":1149,"start_character":9,"end_line":1149,"end_character":17},"updated":"2016-09-09 15:55:31.000000000","message":"I guess this is a guilabel, too?","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5993d22752c63c42bc423e3a0a7e46c981270ca6","unresolved":false,"context_lines":[{"line_number":1146,"context_line":"#. To enable WLP on Unisphere, click on the"},{"line_number":1147,"context_line":"   :menuselection:`array--\u003ePerformance--\u003eSettings`."},{"line_number":1148,"context_line":"#. Set both the :guilabel:`Real Time` and the :guilabel:`Root Cause Analysis`."},{"line_number":1149,"context_line":"#. Click Register."},{"line_number":1150,"context_line":""},{"line_number":1151,"context_line":".. note::"},{"line_number":1152,"context_line":""}],"source_content_type":"text/x-rst","patch_set":7,"id":"9a89bdaa_fc53776a","line":1149,"range":{"start_line":1149,"start_character":9,"end_line":1149,"end_character":17},"in_reply_to":"9a89bdaa_9c3b4b9c","updated":"2016-09-09 15:58:42.000000000","message":"ok","commit_id":"3efe1a167158c192a37d523eba18314e8430613d"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"bc38eb6a7135e133068e21622dfb6ad6c9ee7d8a","unresolved":false,"context_lines":[{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Please note that"},{"line_number":30,"context_line":"this is SSL only.  Please refer to section below ``SSL Support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_4aa55e02","line":30,"range":{"start_line":30,"start_character":19,"end_line":30,"end_character":25},"updated":"2016-09-10 12:41:52.000000000","message":"no need to say please the whole time. Remove it everywhere - see http://docs.openstack.org/contributor-guide/writing-style/general-writing-guidelines.html","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":20156,"name":"Petr Kovar","email":"pkovar@redhat.com","username":"pmkovar"},"change_message_id":"b0ab8a826bde2fa8b39f4c94c5d419bb73f5e2a2","unresolved":false,"context_lines":[{"line_number":134,"context_line":"-  Live Migration"},{"line_number":135,"context_line":""},{"line_number":136,"context_line":"VMAX3"},{"line_number":137,"context_line":"-  Service Level Objective (SLO) support."},{"line_number":138,"context_line":"-  Dynamic masking view creation."},{"line_number":139,"context_line":"-  SnapVX support."},{"line_number":140,"context_line":"-  Extend volume and iSCSI support."}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_1ca01b90","line":137,"updated":"2016-09-09 15:55:47.000000000","message":"Missing blank line.","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"bc38eb6a7135e133068e21622dfb6ad6c9ee7d8a","unresolved":false,"context_lines":[{"line_number":145,"context_line":"-  FAST automated storage tiering policy"},{"line_number":146,"context_line":"-  Striped volume creation"},{"line_number":147,"context_line":""},{"line_number":148,"context_line":"VMAX3:"},{"line_number":149,"context_line":""},{"line_number":150,"context_line":"-  Service Level support"},{"line_number":151,"context_line":"-  SnapVX support"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_6aa862dc","line":148,"range":{"start_line":148,"start_character":0,"end_line":148,"end_character":6},"updated":"2016-09-10 12:41:52.000000000","message":"again VMAX3? See line 136 above","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"30ce07655043ee33172c6a0eae46e672fdd0f07c","unresolved":false,"context_lines":[{"line_number":145,"context_line":"-  FAST automated storage tiering policy"},{"line_number":146,"context_line":"-  Striped volume creation"},{"line_number":147,"context_line":""},{"line_number":148,"context_line":"VMAX3:"},{"line_number":149,"context_line":""},{"line_number":150,"context_line":"-  Service Level support"},{"line_number":151,"context_line":"-  SnapVX support"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_6592344d","line":148,"range":{"start_line":148,"start_character":0,"end_line":148,"end_character":6},"in_reply_to":"9a89bdaa_6aa862dc","updated":"2016-09-12 10:52:18.000000000","message":"This was a merge error.  I will fix","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"bc38eb6a7135e133068e21622dfb6ad6c9ee7d8a","unresolved":false,"context_lines":[{"line_number":478,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":479,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":480,"context_line":""},{"line_number":481,"context_line":"SSL Support"},{"line_number":482,"context_line":"~~~~~~~~~~~"},{"line_number":483,"context_line":""},{"line_number":484,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_8aaf66e2","line":481,"range":{"start_line":481,"start_character":3,"end_line":481,"end_character":11},"updated":"2016-09-10 12:41:52.000000000","message":"Sentence style capitalization for all headers, see Contributore Guide for our conventions: http://docs.openstack.org/contributor-guide\n\nfix everywhere","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"30ce07655043ee33172c6a0eae46e672fdd0f07c","unresolved":false,"context_lines":[{"line_number":478,"context_line":"   $ cinder type-key GoldStriped set volume_backend_name\u003dGOLD_BACKEND"},{"line_number":479,"context_line":"   $ cinder type-key GoldStriped set storagetype:stripecount\u003d4"},{"line_number":480,"context_line":""},{"line_number":481,"context_line":"SSL Support"},{"line_number":482,"context_line":"~~~~~~~~~~~"},{"line_number":483,"context_line":""},{"line_number":484,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_25458cb2","line":481,"range":{"start_line":481,"start_character":3,"end_line":481,"end_character":11},"in_reply_to":"9a89bdaa_8aaf66e2","updated":"2016-09-12 10:52:18.000000000","message":"Ok.","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"bc38eb6a7135e133068e21622dfb6ad6c9ee7d8a","unresolved":false,"context_lines":[{"line_number":495,"context_line":""},{"line_number":496,"context_line":"   .. code-block:: console"},{"line_number":497,"context_line":""},{"line_number":498,"context_line":"      $ sudo cp \u003cecom_hostname\u003e.lss.emc.com.pem /usr/share/ca-certificates/\u003cecom_hostname\u003e.lss.emc.com.crt"},{"line_number":499,"context_line":""},{"line_number":500,"context_line":"#. Update CA certificate database with the following commands"},{"line_number":501,"context_line":"   (accept defaults):"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_cab96e30","line":498,"range":{"start_line":498,"start_character":6,"end_line":498,"end_character":12},"updated":"2016-09-10 12:41:52.000000000","message":"don\u0027 use sudo, use \"#\" instead","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"30ce07655043ee33172c6a0eae46e672fdd0f07c","unresolved":false,"context_lines":[{"line_number":495,"context_line":""},{"line_number":496,"context_line":"   .. code-block:: console"},{"line_number":497,"context_line":""},{"line_number":498,"context_line":"      $ sudo cp \u003cecom_hostname\u003e.lss.emc.com.pem /usr/share/ca-certificates/\u003cecom_hostname\u003e.lss.emc.com.crt"},{"line_number":499,"context_line":""},{"line_number":500,"context_line":"#. Update CA certificate database with the following commands"},{"line_number":501,"context_line":"   (accept defaults):"}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_c526a015","line":498,"range":{"start_line":498,"start_character":6,"end_line":498,"end_character":12},"in_reply_to":"9a89bdaa_cab96e30","updated":"2016-09-12 10:52:18.000000000","message":"Do you mean:\n\n$ # cp \u003cecom_hostname\u003e.lss.emc.com.pem /usr/share/ca-certificates/\u003cecom_hostname\u003e.lss.emc.com.crt\n\nThanks","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"bc38eb6a7135e133068e21622dfb6ad6c9ee7d8a","unresolved":false,"context_lines":[{"line_number":551,"context_line":"that a pool can be oversubscribed."},{"line_number":552,"context_line":""},{"line_number":553,"context_line":""},{"line_number":554,"context_line":"**Scenario 1** - EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":555,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription is"},{"line_number":556,"context_line":"200%."},{"line_number":557,"context_line":""}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_2a857a58","line":554,"range":{"start_line":554,"start_character":0,"end_line":554,"end_character":14},"updated":"2016-09-10 12:41:52.000000000","message":"Don\u0027t use ** for emphasis, this should not be needed.","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"30ce07655043ee33172c6a0eae46e672fdd0f07c","unresolved":false,"context_lines":[{"line_number":551,"context_line":"that a pool can be oversubscribed."},{"line_number":552,"context_line":""},{"line_number":553,"context_line":""},{"line_number":554,"context_line":"**Scenario 1** - EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":555,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription is"},{"line_number":556,"context_line":"200%."},{"line_number":557,"context_line":""}],"source_content_type":"text/x-rst","patch_set":8,"id":"9a89bdaa_a55d1c7b","line":554,"range":{"start_line":554,"start_character":0,"end_line":554,"end_character":14},"in_reply_to":"9a89bdaa_2a857a58","updated":"2016-09-12 10:52:18.000000000","message":"I am getting mixed feedback on this.  Should I change back to \n\nScenario 1 - EMCMaxSubscriptionPercent is 200 and the user defined....\n\n\nThanks","commit_id":"78e66103e322cee76f5ffb8e457dac738999ac62"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"d574bca5d7e742306ffbe16f1c691bee9d039e05","unresolved":false,"context_lines":[{"line_number":145,"context_line":"-  All Flash support"},{"line_number":146,"context_line":""},{"line_number":147,"context_line":".. note::"},{"line_number":148,"context_line":"   VMAX3 All Flash array with Solutions Enabler 8.3 has compression enabled by default.  This means volumes added to any newly created storage groups will be compressed."},{"line_number":149,"context_line":""},{"line_number":150,"context_line":"Setup VMAX drivers"},{"line_number":151,"context_line":"~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":9,"id":"9a89bdaa_fa530914","line":148,"updated":"2016-09-13 06:45:23.000000000","message":"Switch to \"All Flash arrays .. have compression\"","commit_id":"be83c6193c3b3a1da529c4788e4cd822ff400871"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"8d438e1e3b9a1050422114e4525984ee29ea1cf9","unresolved":false,"context_lines":[{"line_number":145,"context_line":"-  All Flash support"},{"line_number":146,"context_line":""},{"line_number":147,"context_line":".. note::"},{"line_number":148,"context_line":"   VMAX3 All Flash array with Solutions Enabler 8.3 has compression enabled by default.  This means volumes added to any newly created storage groups will be compressed."},{"line_number":149,"context_line":""},{"line_number":150,"context_line":"Setup VMAX drivers"},{"line_number":151,"context_line":"~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":9,"id":"9a89bdaa_f73cffe2","line":148,"in_reply_to":"9a89bdaa_fa530914","updated":"2016-09-13 08:34:20.000000000","message":"Sure.  Thank you","commit_id":"be83c6193c3b3a1da529c4788e4cd822ff400871"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"d574bca5d7e742306ffbe16f1c691bee9d039e05","unresolved":false,"context_lines":[{"line_number":521,"context_line":"water mark where by the physical remaining space cannot be exceeded."},{"line_number":522,"context_line":"For example, if there is only 4% of physical space left and the reserve"},{"line_number":523,"context_line":"percentage is 5, the free space will equate to zero.  This is a safety"},{"line_number":524,"context_line":"mechanism to prevent a scenario that a provisioning request failing due to"},{"line_number":525,"context_line":"insufficient raw space."},{"line_number":526,"context_line":""},{"line_number":527,"context_line":"The parameter ``max_over_subscription_ratio`` and ``reserved_percentage`` are"}],"source_content_type":"text/x-rst","patch_set":9,"id":"9a89bdaa_7ab6193f","line":524,"updated":"2016-09-13 06:45:23.000000000","message":"Change to \".. a scenario where a provisioning request fails due to..\"","commit_id":"be83c6193c3b3a1da529c4788e4cd822ff400871"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"8d438e1e3b9a1050422114e4525984ee29ea1cf9","unresolved":false,"context_lines":[{"line_number":521,"context_line":"water mark where by the physical remaining space cannot be exceeded."},{"line_number":522,"context_line":"For example, if there is only 4% of physical space left and the reserve"},{"line_number":523,"context_line":"percentage is 5, the free space will equate to zero.  This is a safety"},{"line_number":524,"context_line":"mechanism to prevent a scenario that a provisioning request failing due to"},{"line_number":525,"context_line":"insufficient raw space."},{"line_number":526,"context_line":""},{"line_number":527,"context_line":"The parameter ``max_over_subscription_ratio`` and ``reserved_percentage`` are"}],"source_content_type":"text/x-rst","patch_set":9,"id":"9a89bdaa_7729cf9a","line":524,"in_reply_to":"9a89bdaa_7ab6193f","updated":"2016-09-13 08:34:20.000000000","message":"Will do","commit_id":"be83c6193c3b3a1da529c4788e4cd822ff400871"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":26,"context_line":"For VMAX-2 series, SMI-S version V4.6.2.29 (Solutions Enabler 7.6.2.67)"},{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5a421e3f","line":29,"range":{"start_line":29,"start_character":52,"end_line":29,"end_character":60},"updated":"2016-09-13 13:13:19.000000000","message":"is required.\n.. note::\n\n   This is SSL only.","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":26,"context_line":"For VMAX-2 series, SMI-S version V4.6.2.29 (Solutions Enabler 7.6.2.67)"},{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_6b24760c","line":29,"range":{"start_line":29,"start_character":52,"end_line":29,"end_character":60},"in_reply_to":"9a89bdaa_5a421e3f","updated":"2016-09-13 13:39:58.000000000","message":"I may just remove the word Note.  Not sure if we need it annotated","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_ba17aa43","line":30,"range":{"start_line":30,"start_character":17,"end_line":30,"end_character":19},"updated":"2016-09-13 13:13:19.000000000","message":"Remove the double space","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_da262eb9","line":30,"range":{"start_line":30,"start_character":55,"end_line":30,"end_character":57},"updated":"2016-09-13 13:13:19.000000000","message":"full stop required here","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_2b00ae65","line":30,"range":{"start_line":30,"start_character":17,"end_line":30,"end_character":19},"in_reply_to":"9a89bdaa_ba17aa43","updated":"2016-09-13 13:39:58.000000000","message":"sure","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":27,"context_line":"or Solutions Enabler 8.1.2 is required."},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_abecbebb","line":30,"range":{"start_line":30,"start_character":55,"end_line":30,"end_character":57},"in_reply_to":"9a89bdaa_da262eb9","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."},{"line_number":34,"context_line":""},{"line_number":35,"context_line":"You can download SMI-S from the EMC\u0027s support web site (login is required)."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5a3bfed0","line":32,"range":{"start_line":32,"start_character":25,"end_line":32,"end_character":33},"updated":"2016-09-13 13:13:19.000000000","message":"Enabler, make sure you explicitly* (remove the please)","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required.  Note that"},{"line_number":30,"context_line":"this is SSL only.  Refer to section below ``SSL support``"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler please make sure you explicitly add the"},{"line_number":33,"context_line":"SMI-S component."},{"line_number":34,"context_line":""},{"line_number":35,"context_line":"You can download SMI-S from the EMC\u0027s support web site (login is required)."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_2b37ce4d","line":32,"range":{"start_line":32,"start_character":25,"end_line":32,"end_character":33},"in_reply_to":"9a89bdaa_5a3bfed0","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":123,"context_line":"-  Create and delete consistency groups"},{"line_number":124,"context_line":"-  Create and delete consistency group snapshots"},{"line_number":125,"context_line":"-  Modify consistency groups (add/remove volumes)"},{"line_number":126,"context_line":"-  Create consistency group from source (source can only be a CG snapshot)"},{"line_number":127,"context_line":""},{"line_number":128,"context_line":"VMAX drivers also support the following features:"},{"line_number":129,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_1a6b36ba","line":126,"range":{"start_line":126,"start_character":22,"end_line":126,"end_character":27},"updated":"2016-09-13 13:13:19.000000000","message":"groups*","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":123,"context_line":"-  Create and delete consistency groups"},{"line_number":124,"context_line":"-  Create and delete consistency group snapshots"},{"line_number":125,"context_line":"-  Modify consistency groups (add/remove volumes)"},{"line_number":126,"context_line":"-  Create consistency group from source (source can only be a CG snapshot)"},{"line_number":127,"context_line":""},{"line_number":128,"context_line":"VMAX drivers also support the following features:"},{"line_number":129,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_ab7bdebc","line":126,"range":{"start_line":126,"start_character":22,"end_line":126,"end_character":27},"in_reply_to":"9a89bdaa_1a6b36ba","updated":"2016-09-13 13:39:58.000000000","message":"They all should be group. I will change this.  Thank you.","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":171,"context_line":""},{"line_number":172,"context_line":"..note::"},{"line_number":173,"context_line":""},{"line_number":174,"context_line":"   On python2 use the updated distro version e.g # apt-get install python-pywbem"},{"line_number":175,"context_line":"   On python3 use the official pywbem version (V0.9.0 or v0.8.4) "},{"line_number":176,"context_line":""},{"line_number":177,"context_line":"#. Install the ``python-pywbem`` package for your distribution."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_7a94428a","line":174,"range":{"start_line":174,"start_character":4,"end_line":174,"end_character":13},"updated":"2016-09-13 13:13:19.000000000","message":"With Python2, use the updated distro version, for example:\n.. code::\n   \n   apt-get install python-pywbem","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":171,"context_line":""},{"line_number":172,"context_line":"..note::"},{"line_number":173,"context_line":""},{"line_number":174,"context_line":"   On python2 use the updated distro version e.g # apt-get install python-pywbem"},{"line_number":175,"context_line":"   On python3 use the official pywbem version (V0.9.0 or v0.8.4) "},{"line_number":176,"context_line":""},{"line_number":177,"context_line":"#. Install the ``python-pywbem`` package for your distribution."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_071cbe68","line":174,"range":{"start_line":174,"start_character":4,"end_line":174,"end_character":13},"in_reply_to":"9a89bdaa_7a94428a","updated":"2016-09-13 13:39:58.000000000","message":"I didn\u0027t think this was possible within a note.  Thanks for pointing it out","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":172,"context_line":"..note::"},{"line_number":173,"context_line":""},{"line_number":174,"context_line":"   On python2 use the updated distro version e.g # apt-get install python-pywbem"},{"line_number":175,"context_line":"   On python3 use the official pywbem version (V0.9.0 or v0.8.4) "},{"line_number":176,"context_line":""},{"line_number":177,"context_line":"#. Install the ``python-pywbem`` package for your distribution."},{"line_number":178,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_3af55aec","line":175,"range":{"start_line":175,"start_character":2,"end_line":175,"end_character":11},"updated":"2016-09-13 13:13:19.000000000","message":"ditto with this sentence","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":378,"context_line":"FC Zoning with VMAX"},{"line_number":379,"context_line":"~~~~~~~~~~~~~~~~~~~"},{"line_number":380,"context_line":""},{"line_number":381,"context_line":"Zone Manager is needed when there is a fabric between the host and array."},{"line_number":382,"context_line":"This is necessary for larger configurations where pre-zoning would be too"},{"line_number":383,"context_line":"complex and open-zoning would raise security concerns."},{"line_number":384,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_bae16a2c","line":381,"range":{"start_line":381,"start_character":16,"end_line":381,"end_character":22},"updated":"2016-09-13 13:13:19.000000000","message":"I would say \u0027required\u0027","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":378,"context_line":"FC Zoning with VMAX"},{"line_number":379,"context_line":"~~~~~~~~~~~~~~~~~~~"},{"line_number":380,"context_line":""},{"line_number":381,"context_line":"Zone Manager is needed when there is a fabric between the host and array."},{"line_number":382,"context_line":"This is necessary for larger configurations where pre-zoning would be too"},{"line_number":383,"context_line":"complex and open-zoning would raise security concerns."},{"line_number":384,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_272e228c","line":381,"range":{"start_line":381,"start_character":16,"end_line":381,"end_character":22},"in_reply_to":"9a89bdaa_bae16a2c","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":385,"context_line":"iSCSI with VMAX"},{"line_number":386,"context_line":"~~~~~~~~~~~~~~~"},{"line_number":387,"context_line":""},{"line_number":388,"context_line":"-  Make sure the ``iscsi-initiator-utils`` package is installed on all compute"},{"line_number":389,"context_line":"   nodes."},{"line_number":390,"context_line":""},{"line_number":391,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_7ac28286","line":388,"range":{"start_line":388,"start_character":71,"end_line":388,"end_character":78},"updated":"2016-09-13 13:13:19.000000000","message":"Compute *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":390,"context_line":""},{"line_number":391,"context_line":".. note::"},{"line_number":392,"context_line":"   You can only ping the VMAX iSCSI target ports when there is a valid masking"},{"line_number":393,"context_line":"   view. This is created on an attach operation."},{"line_number":394,"context_line":""},{"line_number":395,"context_line":"VMAX masking view and group naming info"},{"line_number":396,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5a4cde41","line":393,"range":{"start_line":393,"start_character":9,"end_line":393,"end_character":48},"updated":"2016-09-13 13:13:19.000000000","message":"An attach operation creates this. * (ensure you are writing in active voice, and not passive)","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":390,"context_line":""},{"line_number":391,"context_line":".. note::"},{"line_number":392,"context_line":"   You can only ping the VMAX iSCSI target ports when there is a valid masking"},{"line_number":393,"context_line":"   view. This is created on an attach operation."},{"line_number":394,"context_line":""},{"line_number":395,"context_line":"VMAX masking view and group naming info"},{"line_number":396,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_4776c6a4","line":393,"range":{"start_line":393,"start_character":9,"end_line":393,"end_character":48},"in_reply_to":"9a89bdaa_5a4cde41","updated":"2016-09-13 13:39:58.000000000","message":"Ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":499,"context_line":"~~~~~~~~~~~"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":".. note::"},{"line_number":502,"context_line":"   The ECOM component of Solutions Enable 8.2 enforces SSL.  By default this"},{"line_number":503,"context_line":"   port is 5989"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"#. Get the CA certificate of the ECOM server:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_da054ec2","line":502,"range":{"start_line":502,"start_character":64,"end_line":502,"end_character":71},"updated":"2016-09-13 13:13:19.000000000","message":"default, *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":499,"context_line":"~~~~~~~~~~~"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":".. note::"},{"line_number":502,"context_line":"   The ECOM component of Solutions Enable 8.2 enforces SSL.  By default this"},{"line_number":503,"context_line":"   port is 5989"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"#. Get the CA certificate of the ECOM server:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_9a69068f","line":502,"range":{"start_line":502,"start_character":60,"end_line":502,"end_character":61},"updated":"2016-09-13 13:13:19.000000000","message":"remove double space","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":499,"context_line":"~~~~~~~~~~~"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":".. note::"},{"line_number":502,"context_line":"   The ECOM component of Solutions Enable 8.2 enforces SSL.  By default this"},{"line_number":503,"context_line":"   port is 5989"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"#. Get the CA certificate of the ECOM server:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_07611ed3","line":502,"range":{"start_line":502,"start_character":60,"end_line":502,"end_character":61},"in_reply_to":"9a89bdaa_9a69068f","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":499,"context_line":"~~~~~~~~~~~"},{"line_number":500,"context_line":""},{"line_number":501,"context_line":".. note::"},{"line_number":502,"context_line":"   The ECOM component of Solutions Enable 8.2 enforces SSL.  By default this"},{"line_number":503,"context_line":"   port is 5989"},{"line_number":504,"context_line":""},{"line_number":505,"context_line":"#. Get the CA certificate of the ECOM server:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_87a36eff","line":502,"range":{"start_line":502,"start_character":64,"end_line":502,"end_character":71},"in_reply_to":"9a89bdaa_da054ec2","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":523,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":524,"context_line":""},{"line_number":525,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":526,"context_line":"   to the backend block:"},{"line_number":527,"context_line":""},{"line_number":528,"context_line":"   .. code-block:: none"},{"line_number":529,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_3a11da04","line":526,"range":{"start_line":526,"start_character":11,"end_line":526,"end_character":17},"updated":"2016-09-13 13:13:19.000000000","message":"back end *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":523,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":524,"context_line":""},{"line_number":525,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":526,"context_line":"   to the backend block:"},{"line_number":527,"context_line":""},{"line_number":528,"context_line":"   .. code-block:: none"},{"line_number":529,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_67874a61","line":526,"range":{"start_line":526,"start_character":11,"end_line":526,"end_character":17},"in_reply_to":"9a89bdaa_3a11da04","updated":"2016-09-13 13:39:58.000000000","message":"must confirm","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":539,"context_line":""},{"line_number":540,"context_line":"Oversubscription support requires the ``/etc/cinder/cinder.conf`` to be"},{"line_number":541,"context_line":"updated with two additional tags ``max_over_subscription_ratio`` and/or"},{"line_number":542,"context_line":"``reserved_percentage``. In the sample below the value of 2.0 for"},{"line_number":543,"context_line":"``max_over_subscription_ratio`` means that the pools in oversubscribed by a"},{"line_number":544,"context_line":"factor of 2, or 200% oversubscribed. The ``reserved_percentage`` is the high"},{"line_number":545,"context_line":"water mark where by the physical remaining space cannot be exceeded."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_3adf1a3b","line":542,"range":{"start_line":542,"start_character":38,"end_line":542,"end_character":44},"updated":"2016-09-13 13:13:19.000000000","message":"below, *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":539,"context_line":""},{"line_number":540,"context_line":"Oversubscription support requires the ``/etc/cinder/cinder.conf`` to be"},{"line_number":541,"context_line":"updated with two additional tags ``max_over_subscription_ratio`` and/or"},{"line_number":542,"context_line":"``reserved_percentage``. In the sample below the value of 2.0 for"},{"line_number":543,"context_line":"``max_over_subscription_ratio`` means that the pools in oversubscribed by a"},{"line_number":544,"context_line":"factor of 2, or 200% oversubscribed. The ``reserved_percentage`` is the high"},{"line_number":545,"context_line":"water mark where by the physical remaining space cannot be exceeded."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_e7935aa1","line":542,"range":{"start_line":542,"start_character":38,"end_line":542,"end_character":44},"in_reply_to":"9a89bdaa_3adf1a3b","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":544,"context_line":"factor of 2, or 200% oversubscribed. The ``reserved_percentage`` is the high"},{"line_number":545,"context_line":"water mark where by the physical remaining space cannot be exceeded."},{"line_number":546,"context_line":"For example, if there is only 4% of physical space left and the reserve"},{"line_number":547,"context_line":"percentage is 5, the free space will equate to zero.  This is a safety"},{"line_number":548,"context_line":"mechanism to prevent a scenario where a provisioning request fails due to"},{"line_number":549,"context_line":"insufficient raw space."},{"line_number":550,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5acf7e7e","line":547,"range":{"start_line":547,"start_character":52,"end_line":547,"end_character":53},"updated":"2016-09-13 13:13:19.000000000","message":"remove space","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":544,"context_line":"factor of 2, or 200% oversubscribed. The ``reserved_percentage`` is the high"},{"line_number":545,"context_line":"water mark where by the physical remaining space cannot be exceeded."},{"line_number":546,"context_line":"For example, if there is only 4% of physical space left and the reserve"},{"line_number":547,"context_line":"percentage is 5, the free space will equate to zero.  This is a safety"},{"line_number":548,"context_line":"mechanism to prevent a scenario where a provisioning request fails due to"},{"line_number":549,"context_line":"insufficient raw space."},{"line_number":550,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_47eb2613","line":547,"range":{"start_line":547,"start_character":52,"end_line":547,"end_character":53},"in_reply_to":"9a89bdaa_5acf7e7e","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":552,"context_line":"optional."},{"line_number":553,"context_line":""},{"line_number":554,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":555,"context_line":"``/etc/cinder/cinder.conf``"},{"line_number":556,"context_line":""},{"line_number":557,"context_line":".. code-block:: ini"},{"line_number":558,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_9ac5865d","line":555,"range":{"start_line":555,"start_character":24,"end_line":555,"end_character":27},"updated":"2016-09-13 13:13:19.000000000","message":"full stop required here","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":552,"context_line":"optional."},{"line_number":553,"context_line":""},{"line_number":554,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":555,"context_line":"``/etc/cinder/cinder.conf``"},{"line_number":556,"context_line":""},{"line_number":557,"context_line":".. code-block:: ini"},{"line_number":558,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_a7f4f2f0","line":555,"range":{"start_line":555,"start_character":24,"end_line":555,"end_character":27},"in_reply_to":"9a89bdaa_9ac5865d","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":563,"context_line":"    max_over_subscription_ratio \u003d 2.0"},{"line_number":564,"context_line":"    reserved_percentage \u003d 10"},{"line_number":565,"context_line":""},{"line_number":566,"context_line":"For the second iteration of over subscription we take into account the"},{"line_number":567,"context_line":"EMCMaxSubscriptionPercent property on the pool.  This value is the highest"},{"line_number":568,"context_line":"that a pool can be oversubscribed."},{"line_number":569,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_1aa8968b","line":566,"range":{"start_line":566,"start_character":46,"end_line":566,"end_character":49},"updated":"2016-09-13 13:13:19.000000000","message":"you must take into account *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":563,"context_line":"    max_over_subscription_ratio \u003d 2.0"},{"line_number":564,"context_line":"    reserved_percentage \u003d 10"},{"line_number":565,"context_line":""},{"line_number":566,"context_line":"For the second iteration of over subscription we take into account the"},{"line_number":567,"context_line":"EMCMaxSubscriptionPercent property on the pool.  This value is the highest"},{"line_number":568,"context_line":"that a pool can be oversubscribed."},{"line_number":569,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_47d2465d","line":566,"range":{"start_line":566,"start_character":46,"end_line":566,"end_character":49},"in_reply_to":"9a89bdaa_1aa8968b","updated":"2016-09-13 13:39:58.000000000","message":"sure","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":564,"context_line":"    reserved_percentage \u003d 10"},{"line_number":565,"context_line":""},{"line_number":566,"context_line":"For the second iteration of over subscription we take into account the"},{"line_number":567,"context_line":"EMCMaxSubscriptionPercent property on the pool.  This value is the highest"},{"line_number":568,"context_line":"that a pool can be oversubscribed."},{"line_number":569,"context_line":""},{"line_number":570,"context_line":"Scenario 1"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5a969e4c","line":567,"range":{"start_line":567,"start_character":48,"end_line":567,"end_character":49},"updated":"2016-09-13 13:13:19.000000000","message":"remove - apply throughout","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":564,"context_line":"    reserved_percentage \u003d 10"},{"line_number":565,"context_line":""},{"line_number":566,"context_line":"For the second iteration of over subscription we take into account the"},{"line_number":567,"context_line":"EMCMaxSubscriptionPercent property on the pool.  This value is the highest"},{"line_number":568,"context_line":"that a pool can be oversubscribed."},{"line_number":569,"context_line":""},{"line_number":570,"context_line":"Scenario 1"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_473966a3","line":567,"range":{"start_line":567,"start_character":48,"end_line":567,"end_character":49},"in_reply_to":"9a89bdaa_5a969e4c","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":571,"context_line":"----------"},{"line_number":572,"context_line":""},{"line_number":573,"context_line":"EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":574,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription"},{"line_number":575,"context_line":"isb200%."},{"line_number":576,"context_line":""},{"line_number":577,"context_line":"Scenario 2"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_da88ee24","line":574,"range":{"start_line":574,"start_character":0,"end_line":574,"end_character":27},"updated":"2016-09-13 13:13:19.000000000","message":"``max_over_subscription_ratio``","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":571,"context_line":"----------"},{"line_number":572,"context_line":""},{"line_number":573,"context_line":"EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":574,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription"},{"line_number":575,"context_line":"isb200%."},{"line_number":576,"context_line":""},{"line_number":577,"context_line":"Scenario 2"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_271462e7","line":574,"range":{"start_line":574,"start_character":0,"end_line":574,"end_character":27},"in_reply_to":"9a89bdaa_da88ee24","updated":"2016-09-13 13:39:58.000000000","message":"sure","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":571,"context_line":"----------"},{"line_number":572,"context_line":""},{"line_number":573,"context_line":"EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":574,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription"},{"line_number":575,"context_line":"isb200%."},{"line_number":576,"context_line":""},{"line_number":577,"context_line":"Scenario 2"},{"line_number":578,"context_line":"----------"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_da8f0e21","line":575,"range":{"start_line":574,"start_character":59,"end_line":575,"end_character":8},"updated":"2016-09-13 13:13:19.000000000","message":"what does this mean?","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":571,"context_line":"----------"},{"line_number":572,"context_line":""},{"line_number":573,"context_line":"EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":574,"context_line":"max_over_subscription_ratio is 2.5, the latter is ignored. Oversubscription"},{"line_number":575,"context_line":"isb200%."},{"line_number":576,"context_line":""},{"line_number":577,"context_line":"Scenario 2"},{"line_number":578,"context_line":"----------"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_e7f6fad5","line":575,"range":{"start_line":574,"start_character":59,"end_line":575,"end_character":8},"in_reply_to":"9a89bdaa_da8f0e21","updated":"2016-09-13 13:39:58.000000000","message":"looks like a typo.  I will fix this","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":578,"context_line":"----------"},{"line_number":579,"context_line":""},{"line_number":580,"context_line":"EMCMaxSubscriptionPercent is 200 and the user defined"},{"line_number":581,"context_line":"max_over_subscription_ratio is 1.5, 1.5 equates to 150% and is less than the"},{"line_number":582,"context_line":"value set on the pool. Oversubscription is 150%."},{"line_number":583,"context_line":""},{"line_number":584,"context_line":"Scenario 3"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_9ac10632","line":581,"range":{"start_line":581,"start_character":0,"end_line":581,"end_character":27},"updated":"2016-09-13 13:13:19.000000000","message":"``max_over_subscription_ratio``","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":585,"context_line":"----------"},{"line_number":586,"context_line":""},{"line_number":587,"context_line":"EMCMaxSubscriptionPercent is 0. This means there is no upper limit on the"},{"line_number":588,"context_line":"pool. The user defined max_over_subscription_ratio is 1.5."},{"line_number":589,"context_line":"Oversubscription is 150%."},{"line_number":590,"context_line":""},{"line_number":591,"context_line":"Scenario 4"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_bad5eae5","line":588,"range":{"start_line":588,"start_character":15,"end_line":588,"end_character":50},"updated":"2016-09-13 13:13:19.000000000","message":"``defined max_over_subscription_ratio``","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":591,"context_line":"Scenario 4"},{"line_number":592,"context_line":"----------"},{"line_number":593,"context_line":""},{"line_number":594,"context_line":"EMCMaxSubscriptionPercent is 0. max_over_subscription_ratio is not set by the"},{"line_number":595,"context_line":"user. We default to a hardcoded upper limit which is 150%."},{"line_number":596,"context_line":""},{"line_number":597,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_da046e7f","line":594,"range":{"start_line":594,"start_character":32,"end_line":594,"end_character":59},"updated":"2016-09-13 13:13:19.000000000","message":"``max_over_subscription_ratio``","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":592,"context_line":"----------"},{"line_number":593,"context_line":""},{"line_number":594,"context_line":"EMCMaxSubscriptionPercent is 0. max_over_subscription_ratio is not set by the"},{"line_number":595,"context_line":"user. We default to a hardcoded upper limit which is 150%."},{"line_number":596,"context_line":""},{"line_number":597,"context_line":".. note::"},{"line_number":598,"context_line":"   If FAST is set and multiple pools are associated with a FAST policy,"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_1afb367c","line":595,"range":{"start_line":595,"start_character":6,"end_line":595,"end_character":8},"updated":"2016-09-13 13:13:19.000000000","message":"We recommend to default to upper limit, this is 150%.","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":596,"context_line":""},{"line_number":597,"context_line":".. note::"},{"line_number":598,"context_line":"   If FAST is set and multiple pools are associated with a FAST policy,"},{"line_number":599,"context_line":"   then the same rules apply.  The difference is, the TotalManagedSpace and"},{"line_number":600,"context_line":"   EMCSubscribedCapacity for each pool associated with the FAST policy are aggregated."},{"line_number":601,"context_line":""},{"line_number":602,"context_line":"Scenario 5"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5af93e7f","line":599,"range":{"start_line":599,"start_character":30,"end_line":599,"end_character":31},"updated":"2016-09-13 13:13:19.000000000","message":"remove","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":602,"context_line":"Scenario 5"},{"line_number":603,"context_line":"----------"},{"line_number":604,"context_line":""},{"line_number":605,"context_line":"EMCMaxSubscriptionPercent is 200 on one pool.  It is 300 on another pool."},{"line_number":606,"context_line":"The user defined max_over_subscription_ratio is 2.5. Oversubscription is 200%"},{"line_number":607,"context_line":"on the first pool and 250% on the other."},{"line_number":608,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_fa305258","line":605,"range":{"start_line":605,"start_character":46,"end_line":605,"end_character":47},"updated":"2016-09-13 13:13:19.000000000","message":"remove","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":603,"context_line":"----------"},{"line_number":604,"context_line":""},{"line_number":605,"context_line":"EMCMaxSubscriptionPercent is 200 on one pool.  It is 300 on another pool."},{"line_number":606,"context_line":"The user defined max_over_subscription_ratio is 2.5. Oversubscription is 200%"},{"line_number":607,"context_line":"on the first pool and 250% on the other."},{"line_number":608,"context_line":""},{"line_number":609,"context_line":"QoS (Quality of Service) support"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_5a405ea5","line":606,"range":{"start_line":606,"start_character":17,"end_line":606,"end_character":44},"updated":"2016-09-13 13:13:19.000000000","message":"ditto","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":609,"context_line":"QoS (Quality of Service) support"},{"line_number":610,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":611,"context_line":""},{"line_number":612,"context_line":"Quality of service has traditionally been associated with network bandwidth"},{"line_number":613,"context_line":"usage. Network administrators set limitations on certain networks in terms of"},{"line_number":614,"context_line":"bandwidth usage for clients. This enables them to provide a tiered level of"},{"line_number":615,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_7a3d222a","line":612,"range":{"start_line":612,"start_character":11,"end_line":612,"end_character":18},"updated":"2016-09-13 13:13:19.000000000","message":"Service (QoS)","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":612,"context_line":"Quality of service has traditionally been associated with network bandwidth"},{"line_number":613,"context_line":"usage. Network administrators set limitations on certain networks in terms of"},{"line_number":614,"context_line":"bandwidth usage for clients. This enables them to provide a tiered level of"},{"line_number":615,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":616,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":617,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"},{"line_number":618,"context_line":"Storage vendor. The VMAX3 plugin offers limits via the following attributes:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b5dfbdd4","line":615,"range":{"start_line":615,"start_character":34,"end_line":615,"end_character":37},"updated":"2016-09-13 13:13:19.000000000","message":"QoS","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":612,"context_line":"Quality of service has traditionally been associated with network bandwidth"},{"line_number":613,"context_line":"usage. Network administrators set limitations on certain networks in terms of"},{"line_number":614,"context_line":"bandwidth usage for clients. This enables them to provide a tiered level of"},{"line_number":615,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":616,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":617,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"},{"line_number":618,"context_line":"Storage vendor. The VMAX3 plugin offers limits via the following attributes:"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_2770e23f","line":615,"range":{"start_line":615,"start_character":34,"end_line":615,"end_character":37},"in_reply_to":"9a89bdaa_b5dfbdd4","updated":"2016-09-13 13:39:58.000000000","message":"Will change throughout","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":614,"context_line":"bandwidth usage for clients. This enables them to provide a tiered level of"},{"line_number":615,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":616,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":617,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"},{"line_number":618,"context_line":"Storage vendor. The VMAX3 plugin offers limits via the following attributes:"},{"line_number":619,"context_line":""},{"line_number":620,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_f5f30571","line":617,"range":{"start_line":617,"start_character":37,"end_line":617,"end_character":40},"updated":"2016-09-13 13:13:19.000000000","message":"ditto","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":615,"context_line":"service based on cost. The Cinder QOS offers similar functionality based on"},{"line_number":616,"context_line":"volume type setting limits on host storage bandwidth per service offering."},{"line_number":617,"context_line":"Each volume type is tied to specific QOS attributes that are unique to each"},{"line_number":618,"context_line":"Storage vendor. The VMAX3 plugin offers limits via the following attributes:"},{"line_number":619,"context_line":""},{"line_number":620,"context_line":""},{"line_number":621,"context_line":"- By I/O limit per second (IOPS)"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_15e5c9a2","line":618,"range":{"start_line":618,"start_character":0,"end_line":618,"end_character":7},"updated":"2016-09-13 13:13:19.000000000","message":"storage*","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":620,"context_line":""},{"line_number":621,"context_line":"- By I/O limit per second (IOPS)"},{"line_number":622,"context_line":"- By limiting throughput per second (MB/S)"},{"line_number":623,"context_line":"- Dynamic Distribution"},{"line_number":624,"context_line":"- The VMAX3 offers modification of QOS at the Storage Group level"},{"line_number":625,"context_line":""},{"line_number":626,"context_line":"USE CASE 1 - Default values"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_7500d534","line":623,"range":{"start_line":623,"start_character":10,"end_line":623,"end_character":22},"updated":"2016-09-13 13:13:19.000000000","message":"distribution*","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":621,"context_line":"- By I/O limit per second (IOPS)"},{"line_number":622,"context_line":"- By limiting throughput per second (MB/S)"},{"line_number":623,"context_line":"- Dynamic Distribution"},{"line_number":624,"context_line":"- The VMAX3 offers modification of QOS at the Storage Group level"},{"line_number":625,"context_line":""},{"line_number":626,"context_line":"USE CASE 1 - Default values"},{"line_number":627,"context_line":"---------------------------"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b5f6dd5a","line":624,"range":{"start_line":624,"start_character":35,"end_line":624,"end_character":38},"updated":"2016-09-13 13:13:19.000000000","message":"QoS","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":621,"context_line":"- By I/O limit per second (IOPS)"},{"line_number":622,"context_line":"- By limiting throughput per second (MB/S)"},{"line_number":623,"context_line":"- Dynamic Distribution"},{"line_number":624,"context_line":"- The VMAX3 offers modification of QOS at the Storage Group level"},{"line_number":625,"context_line":""},{"line_number":626,"context_line":"USE CASE 1 - Default values"},{"line_number":627,"context_line":"---------------------------"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_95f9d950","line":624,"range":{"start_line":624,"start_character":46,"end_line":624,"end_character":59},"updated":"2016-09-13 13:13:19.000000000","message":"storage group","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":632,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":633,"context_line":"- Set Dynamic Distribution -    N/A"},{"line_number":634,"context_line":""},{"line_number":635,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":636,"context_line":""},{"line_number":637,"context_line":".. code-block:: none"},{"line_number":638,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_f5c145e5","line":635,"range":{"start_line":635,"start_character":16,"end_line":635,"end_character":22},"updated":"2016-09-13 13:13:19.000000000","message":"Block Storage (cinder)","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":632,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":633,"context_line":"- Set Dynamic Distribution -    N/A"},{"line_number":634,"context_line":""},{"line_number":635,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":636,"context_line":""},{"line_number":637,"context_line":".. code-block:: none"},{"line_number":638,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b58dfdd4","line":635,"range":{"start_line":635,"start_character":23,"end_line":635,"end_character":30},"updated":"2016-09-13 13:13:19.000000000","message":"back end","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":632,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":633,"context_line":"- Set Dynamic Distribution -    N/A"},{"line_number":634,"context_line":""},{"line_number":635,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":636,"context_line":""},{"line_number":637,"context_line":".. code-block:: none"},{"line_number":638,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_678d8a30","line":635,"range":{"start_line":635,"start_character":23,"end_line":635,"end_character":30},"in_reply_to":"9a89bdaa_b58dfdd4","updated":"2016-09-13 13:39:58.000000000","message":"to confirm","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":632,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":633,"context_line":"- Set Dynamic Distribution -    N/A"},{"line_number":634,"context_line":""},{"line_number":635,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":636,"context_line":""},{"line_number":637,"context_line":".. code-block:: none"},{"line_number":638,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_e7cefa58","line":635,"range":{"start_line":635,"start_character":16,"end_line":635,"end_character":22},"in_reply_to":"9a89bdaa_f5c145e5","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":641,"context_line":"    maxMBPS           4000"},{"line_number":642,"context_line":"    DistributionType  Always"},{"line_number":643,"context_line":""},{"line_number":644,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":645,"context_line":""},{"line_number":646,"context_line":"   Usage:"},{"line_number":647,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_55b1118e","line":644,"range":{"start_line":644,"start_character":10,"end_line":644,"end_character":14},"updated":"2016-09-13 13:13:19.000000000","message":"QoS - apply throughout","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":641,"context_line":"    maxMBPS           4000"},{"line_number":642,"context_line":"    DistributionType  Always"},{"line_number":643,"context_line":""},{"line_number":644,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":645,"context_line":""},{"line_number":646,"context_line":"   Usage:"},{"line_number":647,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b0b34b4c","line":644,"range":{"start_line":644,"start_character":49,"end_line":644,"end_character":55},"updated":"2016-09-13 13:13:19.000000000","message":"above:","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":643,"context_line":""},{"line_number":644,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":645,"context_line":""},{"line_number":646,"context_line":"   Usage:"},{"line_number":647,"context_line":""},{"line_number":648,"context_line":"   .. code-block:: console"},{"line_number":649,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_3059fb35","line":646,"range":{"start_line":646,"start_character":0,"end_line":646,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"remove","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":643,"context_line":""},{"line_number":644,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":645,"context_line":""},{"line_number":646,"context_line":"   Usage:"},{"line_number":647,"context_line":""},{"line_number":648,"context_line":"   .. code-block:: console"},{"line_number":649,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_67e2ead6","line":646,"range":{"start_line":646,"start_character":0,"end_line":646,"end_character":9},"in_reply_to":"9a89bdaa_3059fb35","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":653,"context_line":""},{"line_number":654,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":655,"context_line":""},{"line_number":656,"context_line":"#. Associate QOS specs with specified volume type."},{"line_number":657,"context_line":""},{"line_number":658,"context_line":"   Usage:"},{"line_number":659,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_706623ee","line":656,"range":{"start_line":656,"start_character":45,"end_line":656,"end_character":50},"updated":"2016-09-13 13:13:19.000000000","message":"type:","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":654,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":655,"context_line":""},{"line_number":656,"context_line":"#. Associate QOS specs with specified volume type."},{"line_number":657,"context_line":""},{"line_number":658,"context_line":"   Usage:"},{"line_number":659,"context_line":""},{"line_number":660,"context_line":"   .. code-block:: console"},{"line_number":661,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_f087935e","line":658,"range":{"start_line":657,"start_character":0,"end_line":658,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"remove","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":665,"context_line":""},{"line_number":666,"context_line":"       $ cinder qos-associate 07767ad8-6170-4c71-abce-99e68702f051 224b1517-4a23-44b5-9035-8d9e2c18fb70"},{"line_number":667,"context_line":""},{"line_number":668,"context_line":"#. Create volume with the volume type indicated above."},{"line_number":669,"context_line":""},{"line_number":670,"context_line":"   Usage:"},{"line_number":671,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_7094638a","line":668,"range":{"start_line":668,"start_character":48,"end_line":668,"end_character":54},"updated":"2016-09-13 13:13:19.000000000","message":"above:","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":665,"context_line":""},{"line_number":666,"context_line":"       $ cinder qos-associate 07767ad8-6170-4c71-abce-99e68702f051 224b1517-4a23-44b5-9035-8d9e2c18fb70"},{"line_number":667,"context_line":""},{"line_number":668,"context_line":"#. Create volume with the volume type indicated above."},{"line_number":669,"context_line":""},{"line_number":670,"context_line":"   Usage:"},{"line_number":671,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_a736b24e","line":668,"range":{"start_line":668,"start_character":48,"end_line":668,"end_character":54},"in_reply_to":"9a89bdaa_7094638a","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":667,"context_line":""},{"line_number":668,"context_line":"#. Create volume with the volume type indicated above."},{"line_number":669,"context_line":""},{"line_number":670,"context_line":"   Usage:"},{"line_number":671,"context_line":""},{"line_number":672,"context_line":"   .. code-block:: console"},{"line_number":673,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b08a6b62","line":670,"range":{"start_line":670,"start_character":1,"end_line":670,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"remove","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":683,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":684,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":685,"context_line":""},{"line_number":686,"context_line":"**Outcome - Cinder**"},{"line_number":687,"context_line":""},{"line_number":688,"context_line":"Volume is created against volume type and QOS is enforced with the parameters"},{"line_number":689,"context_line":"above."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_10f077fc","line":686,"range":{"start_line":686,"start_character":12,"end_line":686,"end_character":18},"updated":"2016-09-13 13:13:19.000000000","message":"cinder *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":697,"context_line":"- Host I/O Limit (IO/Sec) -     2000"},{"line_number":698,"context_line":"- Set Dynamic Distribution -    Never"},{"line_number":699,"context_line":""},{"line_number":700,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":701,"context_line":""},{"line_number":702,"context_line":".. code-block:: none"},{"line_number":703,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_90e4873c","line":700,"range":{"start_line":700,"start_character":16,"end_line":700,"end_character":46},"updated":"2016-09-13 13:13:19.000000000","message":"ditto with above","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":706,"context_line":"    maxMBPS           4000"},{"line_number":707,"context_line":"    DistributionType  Always"},{"line_number":708,"context_line":""},{"line_number":709,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":710,"context_line":""},{"line_number":711,"context_line":"   Usage:"},{"line_number":712,"context_line":""},{"line_number":713,"context_line":"   .. code-block:: console"},{"line_number":714,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_70c2a386","line":711,"range":{"start_line":709,"start_character":0,"end_line":711,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"Apply same as above to all these steps","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":748,"context_line":"- Host I/O Limit (IO/Sec) -     4000"},{"line_number":749,"context_line":"- Set Dynamic Distribution -    Always"},{"line_number":750,"context_line":""},{"line_number":751,"context_line":"**Outcome - Cinder**"},{"line_number":752,"context_line":""},{"line_number":753,"context_line":"Volume is created against volume type and QOS is enforced with the parameters"},{"line_number":754,"context_line":"above."}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_b0b8ab12","line":751,"range":{"start_line":751,"start_character":12,"end_line":751,"end_character":20},"updated":"2016-09-13 13:13:19.000000000","message":"ditto","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":763,"context_line":"- Host I/O Limit (IO/Sec) -     No Limit"},{"line_number":764,"context_line":"- Set Dynamic Distribution -    N/A"},{"line_number":765,"context_line":""},{"line_number":766,"context_line":"Prerequisites - Cinder Backend (Storage Group)"},{"line_number":767,"context_line":""},{"line_number":768,"context_line":".. code-block:: none"},{"line_number":769,"context_line":""},{"line_number":770,"context_line":"    Key               Value"},{"line_number":771,"context_line":"    DistributionType  Always"},{"line_number":772,"context_line":""},{"line_number":773,"context_line":"#. Create QOS Specs with the prerequisite values above."},{"line_number":774,"context_line":""},{"line_number":775,"context_line":"   Usage:"},{"line_number":776,"context_line":""},{"line_number":777,"context_line":"   .. code-block:: console"},{"line_number":778,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_3043bb14","line":775,"range":{"start_line":766,"start_character":0,"end_line":775,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"ditto here too","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":921,"context_line":""},{"line_number":922,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":923,"context_line":"performance. Log in as a privileged user and make the following changes to"},{"line_number":924,"context_line":"``/etc/multipath.conf`` on Nova compute node(s)."},{"line_number":925,"context_line":""},{"line_number":926,"context_line":".. code-block:: ini"},{"line_number":927,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_909c876b","line":924,"range":{"start_line":924,"start_character":27,"end_line":924,"end_character":44},"updated":"2016-09-13 13:13:19.000000000","message":"Compute (nova) nodes.","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":921,"context_line":""},{"line_number":922,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":923,"context_line":"performance. Log in as a privileged user and make the following changes to"},{"line_number":924,"context_line":"``/etc/multipath.conf`` on Nova compute node(s)."},{"line_number":925,"context_line":""},{"line_number":926,"context_line":".. code-block:: ini"},{"line_number":927,"context_line":""}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_677e6ae5","line":924,"range":{"start_line":924,"start_character":27,"end_line":924,"end_character":44},"in_reply_to":"9a89bdaa_909c876b","updated":"2016-09-13 13:39:58.000000000","message":"ok","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":954,"context_line":"   # service open-iscsi restart"},{"line_number":955,"context_line":"   # service multipath-tools restart"},{"line_number":956,"context_line":""},{"line_number":957,"context_line":"On On openSUSE, SUSE Linux Enterprise Server, Red Hat Enterprise Linux and"},{"line_number":958,"context_line":"CentOS:"},{"line_number":959,"context_line":""},{"line_number":960,"context_line":".. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_107f9717","line":957,"range":{"start_line":957,"start_character":65,"end_line":957,"end_character":70},"updated":"2016-09-13 13:13:19.000000000","message":"Linux, and*","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":975,"context_line":"OpenStack configurations"},{"line_number":976,"context_line":"------------------------"},{"line_number":977,"context_line":""},{"line_number":978,"context_line":"On Nova compute node, add the following flag in the ``[libvirt]`` section of"},{"line_number":979,"context_line":"``/etc/nova/nova.conf``:"},{"line_number":980,"context_line":""},{"line_number":981,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_1096b73d","line":978,"range":{"start_line":978,"start_character":3,"end_line":978,"end_character":20},"updated":"2016-09-13 13:13:19.000000000","message":"Compute (nova) node,","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"38c6c81daf1506e8315ee250ff86368d751aab11","unresolved":false,"context_lines":[{"line_number":982,"context_line":""},{"line_number":983,"context_line":"   iscsi_use_multipath \u003d True"},{"line_number":984,"context_line":""},{"line_number":985,"context_line":"On Cinder controller node, set the multipath flag to true in"},{"line_number":986,"context_line":"``/etc/cinder.conf``"},{"line_number":987,"context_line":""},{"line_number":988,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_309bbb67","line":985,"range":{"start_line":985,"start_character":3,"end_line":985,"end_character":9},"updated":"2016-09-13 13:13:19.000000000","message":"cinder *","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"596243d421f8d3a6d2f6d737f8d38af518e88061","unresolved":false,"context_lines":[{"line_number":982,"context_line":""},{"line_number":983,"context_line":"   iscsi_use_multipath \u003d True"},{"line_number":984,"context_line":""},{"line_number":985,"context_line":"On Cinder controller node, set the multipath flag to true in"},{"line_number":986,"context_line":"``/etc/cinder.conf``"},{"line_number":987,"context_line":""},{"line_number":988,"context_line":".. code-block:: ini"}],"source_content_type":"text/x-rst","patch_set":10,"id":"9a89bdaa_0792fef5","line":985,"range":{"start_line":985,"start_character":3,"end_line":985,"end_character":9},"in_reply_to":"9a89bdaa_309bbb67","updated":"2016-09-13 13:39:58.000000000","message":"Thanks for the great feedback","commit_id":"aaf3d0310ffa716d0d8d67ece7b28ea67fcd1081"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required. This is SSL only."},{"line_number":30,"context_line":"Refer to section below ``SSL support``."},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler make sure you explicitly add the SMI-S"},{"line_number":33,"context_line":"component."},{"line_number":34,"context_line":""},{"line_number":35,"context_line":"You can download SMI-S from the EMC\u0027s support web site (login is required)."}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_a115d4e5","line":32,"range":{"start_line":32,"start_character":26,"end_line":32,"end_character":33},"updated":"2016-09-16 09:48:04.000000000","message":"Enabler, make sure you ... *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":29,"context_line":"For VMAX-3 series, Solutions Enabler 8.3 is required. This is SSL only."},{"line_number":30,"context_line":"Refer to section below ``SSL support``."},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"When installing Solutions Enabler make sure you explicitly add the SMI-S"},{"line_number":33,"context_line":"component."},{"line_number":34,"context_line":""},{"line_number":35,"context_line":"You can download SMI-S from the EMC\u0027s support web site (login is required)."}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_bc533a16","line":32,"range":{"start_line":32,"start_character":26,"end_line":32,"end_character":33},"in_reply_to":"7a8ec9b2_a115d4e5","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":173,"context_line":""},{"line_number":174,"context_line":".. note::"},{"line_number":175,"context_line":""},{"line_number":176,"context_line":"   On Python2, use the updated distro version, for example"},{"line_number":177,"context_line":""},{"line_number":178,"context_line":".. code-block:: console"},{"line_number":179,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c1bbc0e3","line":176,"range":{"start_line":176,"start_character":50,"end_line":176,"end_character":58},"updated":"2016-09-16 09:48:04.000000000","message":"example: *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":173,"context_line":""},{"line_number":174,"context_line":".. note::"},{"line_number":175,"context_line":""},{"line_number":176,"context_line":"   On Python2, use the updated distro version, for example"},{"line_number":177,"context_line":""},{"line_number":178,"context_line":".. code-block:: console"},{"line_number":179,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_dc6ba6b7","line":176,"range":{"start_line":176,"start_character":50,"end_line":176,"end_character":58},"in_reply_to":"7a8ec9b2_c1bbc0e3","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":175,"context_line":""},{"line_number":176,"context_line":"   On Python2, use the updated distro version, for example"},{"line_number":177,"context_line":""},{"line_number":178,"context_line":".. code-block:: console"},{"line_number":179,"context_line":""},{"line_number":180,"context_line":"   # apt-get install python-pywbem"},{"line_number":181,"context_line":""},{"line_number":182,"context_line":".. note::"},{"line_number":183,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_a1c31456","line":180,"range":{"start_line":178,"start_character":0,"end_line":180,"end_character":34},"updated":"2016-09-16 09:48:04.000000000","message":"indent this code block to be within the note","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":175,"context_line":""},{"line_number":176,"context_line":"   On Python2, use the updated distro version, for example"},{"line_number":177,"context_line":""},{"line_number":178,"context_line":".. code-block:: console"},{"line_number":179,"context_line":""},{"line_number":180,"context_line":"   # apt-get install python-pywbem"},{"line_number":181,"context_line":""},{"line_number":182,"context_line":".. note::"},{"line_number":183,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_3c672aea","line":180,"range":{"start_line":178,"start_character":0,"end_line":180,"end_character":34},"in_reply_to":"7a8ec9b2_a1c31456","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":181,"context_line":""},{"line_number":182,"context_line":".. note::"},{"line_number":183,"context_line":""},{"line_number":184,"context_line":"   On Python3, use the official pywbem version (V0.9.0 or v0.8.4)"},{"line_number":185,"context_line":""},{"line_number":186,"context_line":"#. Install the ``python-pywbem`` package for your distribution."},{"line_number":187,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_01a92890","line":184,"range":{"start_line":184,"start_character":63,"end_line":184,"end_character":65},"updated":"2016-09-16 09:48:04.000000000","message":"full stop","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":181,"context_line":""},{"line_number":182,"context_line":".. note::"},{"line_number":183,"context_line":""},{"line_number":184,"context_line":"   On Python3, use the official pywbem version (V0.9.0 or v0.8.4)"},{"line_number":185,"context_line":""},{"line_number":186,"context_line":"#. Install the ``python-pywbem`` package for your distribution."},{"line_number":187,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_7c5d3214","line":184,"range":{"start_line":184,"start_character":63,"end_line":184,"end_character":65},"in_reply_to":"7a8ec9b2_01a92890","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":548,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":549,"context_line":""},{"line_number":550,"context_line":"Oversubscription support requires the ``/etc/cinder/cinder.conf`` to be"},{"line_number":551,"context_line":"updated with two additional tags ``max_over_subscription_ratio`` and/or"},{"line_number":552,"context_line":"``reserved_percentage``. In the sample below, the value of 2.0 for"},{"line_number":553,"context_line":"``max_over_subscription_ratio`` means that the pools in oversubscribed by a"},{"line_number":554,"context_line":"factor of 2, or 200% oversubscribed. The ``reserved_percentage`` is the high"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c1902046","line":551,"range":{"start_line":551,"start_character":65,"end_line":551,"end_character":71},"updated":"2016-09-16 09:48:04.000000000","message":"avoid using \u0027and/or\u0027 - be specific","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":573,"context_line":"    max_over_subscription_ratio \u003d 2.0"},{"line_number":574,"context_line":"    reserved_percentage \u003d 10"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"For the second iteration of over subscription you must take into account the"},{"line_number":577,"context_line":"EMCMaxSubscriptionPercent property on the pool. This value is the highest"},{"line_number":578,"context_line":"that a pool can be oversubscribed."},{"line_number":579,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c1de6010","line":576,"range":{"start_line":576,"start_character":32,"end_line":576,"end_character":45},"updated":"2016-09-16 09:48:04.000000000","message":"oversubscription, take into account *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":573,"context_line":"    max_over_subscription_ratio \u003d 2.0"},{"line_number":574,"context_line":"    reserved_percentage \u003d 10"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"For the second iteration of over subscription you must take into account the"},{"line_number":577,"context_line":"EMCMaxSubscriptionPercent property on the pool. This value is the highest"},{"line_number":578,"context_line":"that a pool can be oversubscribed."},{"line_number":579,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_9c83de55","line":576,"range":{"start_line":576,"start_character":32,"end_line":576,"end_character":45},"in_reply_to":"7a8ec9b2_c1de6010","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":623,"context_line":"Quality of service(QoS) has traditionally been associated with network"},{"line_number":624,"context_line":"bandwidth usage. Network administrators set limitations on certain networks"},{"line_number":625,"context_line":"in terms of bandwidth usage for clients. This enables them to provide a"},{"line_number":626,"context_line":"tiered level of service based on cost. The Cinder QoS offers similar"},{"line_number":627,"context_line":"functionality based on volume type setting limits on host storage bandwidth"},{"line_number":628,"context_line":"per service offering. Each volume type is tied to specific QoS attributes"},{"line_number":629,"context_line":"that are unique to each storage vendor. The VMAX3 plugin offers limits via"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_a1d6b4ee","line":626,"range":{"start_line":626,"start_character":43,"end_line":626,"end_character":49},"updated":"2016-09-16 09:48:04.000000000","message":"lowercase for cinder","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":623,"context_line":"Quality of service(QoS) has traditionally been associated with network"},{"line_number":624,"context_line":"bandwidth usage. Network administrators set limitations on certain networks"},{"line_number":625,"context_line":"in terms of bandwidth usage for clients. This enables them to provide a"},{"line_number":626,"context_line":"tiered level of service based on cost. The Cinder QoS offers similar"},{"line_number":627,"context_line":"functionality based on volume type setting limits on host storage bandwidth"},{"line_number":628,"context_line":"per service offering. Each volume type is tied to specific QoS attributes"},{"line_number":629,"context_line":"that are unique to each storage vendor. The VMAX3 plugin offers limits via"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_dc79e683","line":626,"range":{"start_line":626,"start_character":43,"end_line":626,"end_character":49},"in_reply_to":"7a8ec9b2_a1d6b4ee","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":727,"context_line":""},{"line_number":728,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":729,"context_line":""},{"line_number":730,"context_line":"#. Associate qos specs with specified volume type:"},{"line_number":731,"context_line":""},{"line_number":732,"context_line":"   .. code-block:: console"},{"line_number":733,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c12ca004","line":730,"range":{"start_line":730,"start_character":13,"end_line":730,"end_character":16},"updated":"2016-09-16 09:48:04.000000000","message":"QoS","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":727,"context_line":""},{"line_number":728,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":729,"context_line":""},{"line_number":730,"context_line":"#. Associate qos specs with specified volume type:"},{"line_number":731,"context_line":""},{"line_number":732,"context_line":"   .. code-block:: console"},{"line_number":733,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_3c956a86","line":730,"range":{"start_line":730,"start_character":13,"end_line":730,"end_character":16},"in_reply_to":"7a8ec9b2_c12ca004","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":787,"context_line":"       $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":788,"context_line":""},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"#. Associate qos specs with specified volume type:"},{"line_number":791,"context_line":""},{"line_number":792,"context_line":"   .. code-block:: console"},{"line_number":793,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c113c0b6","line":790,"range":{"start_line":790,"start_character":13,"end_line":790,"end_character":16},"updated":"2016-09-16 09:48:04.000000000","message":"QoS","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":787,"context_line":"       $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":788,"context_line":""},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"#. Associate qos specs with specified volume type:"},{"line_number":791,"context_line":""},{"line_number":792,"context_line":"   .. code-block:: console"},{"line_number":793,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_7c8b7268","line":790,"range":{"start_line":790,"start_character":13,"end_line":790,"end_character":16},"in_reply_to":"7a8ec9b2_c113c0b6","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":881,"context_line":"- Install open-iscsi on all nodes on your system"},{"line_number":882,"context_line":"- Do not install EMC PowerPath as they cannot co-exist with native multipath"},{"line_number":883,"context_line":"  software"},{"line_number":884,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":885,"context_line":""},{"line_number":886,"context_line":"On Ubuntu:"},{"line_number":887,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_018128c3","line":884,"range":{"start_line":884,"start_character":43,"end_line":884,"end_character":47},"updated":"2016-09-16 09:48:04.000000000","message":"nova *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":881,"context_line":"- Install open-iscsi on all nodes on your system"},{"line_number":882,"context_line":"- Do not install EMC PowerPath as they cannot co-exist with native multipath"},{"line_number":883,"context_line":"  software"},{"line_number":884,"context_line":"- Multipath tools must be installed on all Nova compute nodes"},{"line_number":885,"context_line":""},{"line_number":886,"context_line":"On Ubuntu:"},{"line_number":887,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_bcefba1c","line":884,"range":{"start_line":884,"start_character":43,"end_line":884,"end_character":47},"in_reply_to":"7a8ec9b2_018128c3","updated":"2016-09-16 10:40:19.000000000","message":"sure","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":984,"context_line":""},{"line_number":985,"context_line":"   use_multipath_for_image_xfer \u003d True"},{"line_number":986,"context_line":""},{"line_number":987,"context_line":"Restart nova-compute and cinder-volume services after the change."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":990,"context_line":"-------------------------------------------------------------------------"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_01584889","line":987,"range":{"start_line":987,"start_character":7,"end_line":987,"end_character":38},"updated":"2016-09-16 09:48:04.000000000","message":"``nova-compute`` and ``cinder-volume``","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":984,"context_line":""},{"line_number":985,"context_line":"   use_multipath_for_image_xfer \u003d True"},{"line_number":986,"context_line":""},{"line_number":987,"context_line":"Restart nova-compute and cinder-volume services after the change."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":990,"context_line":"-------------------------------------------------------------------------"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_fcf5c2ec","line":987,"range":{"start_line":987,"start_character":7,"end_line":987,"end_character":38},"in_reply_to":"7a8ec9b2_01584889","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":986,"context_line":""},{"line_number":987,"context_line":"Restart nova-compute and cinder-volume services after the change."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":990,"context_line":"-------------------------------------------------------------------------"},{"line_number":991,"context_line":""},{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_4156d05c","line":989,"range":{"start_line":989,"start_character":53,"end_line":989,"end_character":60},"updated":"2016-09-16 09:48:04.000000000","message":"Compute *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":986,"context_line":""},{"line_number":987,"context_line":"Restart nova-compute and cinder-volume services after the change."},{"line_number":988,"context_line":""},{"line_number":989,"context_line":"Verify you have multiple initiators available on the compute node for I/O"},{"line_number":990,"context_line":"-------------------------------------------------------------------------"},{"line_number":991,"context_line":""},{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_3cdc8a72","line":989,"range":{"start_line":989,"start_character":53,"end_line":989,"end_character":60},"in_reply_to":"7a8ec9b2_4156d05c","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":991,"context_line":""},{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."},{"line_number":993,"context_line":"#. Create an instance from image out of native LVM storage or from VMAX"},{"line_number":994,"context_line":"   storage, e.g from a bootable volume"},{"line_number":995,"context_line":"#. Attach the 3GB volume to the new instance"},{"line_number":996,"context_line":""},{"line_number":997,"context_line":"   .. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_6153cc6b","line":994,"range":{"start_line":994,"start_character":12,"end_line":994,"end_character":16},"updated":"2016-09-16 09:48:04.000000000","message":"for example, from a bootable volume","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":991,"context_line":""},{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."},{"line_number":993,"context_line":"#. Create an instance from image out of native LVM storage or from VMAX"},{"line_number":994,"context_line":"   storage, e.g from a bootable volume"},{"line_number":995,"context_line":"#. Attach the 3GB volume to the new instance"},{"line_number":996,"context_line":""},{"line_number":997,"context_line":"   .. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_5cbcf605","line":994,"range":{"start_line":994,"start_character":12,"end_line":994,"end_character":16},"in_reply_to":"7a8ec9b2_6153cc6b","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."},{"line_number":993,"context_line":"#. Create an instance from image out of native LVM storage or from VMAX"},{"line_number":994,"context_line":"   storage, e.g from a bootable volume"},{"line_number":995,"context_line":"#. Attach the 3GB volume to the new instance"},{"line_number":996,"context_line":""},{"line_number":997,"context_line":"   .. code-block:: console"},{"line_number":998,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_a14954b9","line":995,"range":{"start_line":995,"start_character":36,"end_line":995,"end_character":44},"updated":"2016-09-16 09:48:04.000000000","message":"instance: *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":992,"context_line":"#. Create a 3GB VMAX3 volume."},{"line_number":993,"context_line":"#. Create an instance from image out of native LVM storage or from VMAX"},{"line_number":994,"context_line":"   storage, e.g from a bootable volume"},{"line_number":995,"context_line":"#. Attach the 3GB volume to the new instance"},{"line_number":996,"context_line":""},{"line_number":997,"context_line":"   .. code-block:: console"},{"line_number":998,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_bc3dfa90","line":995,"range":{"start_line":995,"start_character":36,"end_line":995,"end_character":44},"in_reply_to":"7a8ec9b2_a14954b9","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":1003,"context_line":"      33:0:0:1 sdb 8:16 active ready running"},{"line_number":1004,"context_line":"      \u0027- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":1005,"context_line":""},{"line_number":1006,"context_line":"#. Use the ``lsblk`` command to see the multipath device."},{"line_number":1007,"context_line":""},{"line_number":1008,"context_line":"   .. code-block:: console"},{"line_number":1009,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_41ddf0de","line":1006,"range":{"start_line":1006,"start_character":51,"end_line":1006,"end_character":57},"updated":"2016-09-16 09:48:04.000000000","message":"device: *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":1003,"context_line":"      33:0:0:1 sdb 8:16 active ready running"},{"line_number":1004,"context_line":"      \u0027- 34:0:0:1 sdc 8:32 active ready running"},{"line_number":1005,"context_line":""},{"line_number":1006,"context_line":"#. Use the ``lsblk`` command to see the multipath device."},{"line_number":1007,"context_line":""},{"line_number":1008,"context_line":"   .. code-block:: console"},{"line_number":1009,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_9c2d9e48","line":1006,"range":{"start_line":1006,"start_character":51,"end_line":1006,"end_character":57},"in_reply_to":"7a8ec9b2_41ddf0de","updated":"2016-09-16 10:40:19.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"9eb7b0a73f599f9b313ad065aa274a6ccd247a3c","unresolved":false,"context_lines":[{"line_number":1019,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":1020,"context_line":""},{"line_number":1021,"context_line":"Consistency Groups operations are performed through the  CLI using v2 of"},{"line_number":1022,"context_line":"Cinder API"},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_7a7addf2","line":1022,"updated":"2016-09-15 06:59:08.000000000","message":"Add a full stop and the definite article, and remove the double space \"..through the CLI using v2 of the Cinder API.","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"fb4fce086630c292a73f4ed0ed75f7090d7842c9","unresolved":false,"context_lines":[{"line_number":1019,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":1020,"context_line":""},{"line_number":1021,"context_line":"Consistency Groups operations are performed through the  CLI using v2 of"},{"line_number":1022,"context_line":"Cinder API"},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_42d4401f","line":1022,"in_reply_to":"7a8ec9b2_7a7addf2","updated":"2016-09-15 13:41:22.000000000","message":"Will do.  Thanks","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"9eb7b0a73f599f9b313ad065aa274a6ccd247a3c","unresolved":false,"context_lines":[{"line_number":1022,"context_line":"Cinder API"},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups"},{"line_number":1026,"context_line":""},{"line_number":1027,"context_line":".. note::"},{"line_number":1028,"context_line":"   Even though the terminology is \u0027Consistency Group\u0027 in OpenStack, a Storage"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_ba8465d4","line":1025,"updated":"2016-09-15 06:59:08.000000000","message":"Add a full stop here.","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"fb4fce086630c292a73f4ed0ed75f7090d7842c9","unresolved":false,"context_lines":[{"line_number":1022,"context_line":"Cinder API"},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups"},{"line_number":1026,"context_line":""},{"line_number":1027,"context_line":".. note::"},{"line_number":1028,"context_line":"   Even though the terminology is \u0027Consistency Group\u0027 in OpenStack, a Storage"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_a2e18400","line":1025,"in_reply_to":"7a8ec9b2_ba8465d4","updated":"2016-09-15 13:41:22.000000000","message":"Ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"9eb7b0a73f599f9b313ad065aa274a6ccd247a3c","unresolved":false,"context_lines":[{"line_number":1153,"context_line":"VMAX3 allows you to manage application storage by using Service Level"},{"line_number":1154,"context_line":"Objectives (SLO) using policy based automation rather than the tiering in the"},{"line_number":1155,"context_line":"VMAX2. The VMAX3 Hybrid comes with up to 6 SLO policies defined. Each has a"},{"line_number":1156,"context_line":"set of workload characteristics which determine the drive types/mixes which"},{"line_number":1157,"context_line":"will be used for the SLO. All storage in the VMAX3 Array is virtually"},{"line_number":1158,"context_line":"provisioned, and all of the pools are created in containers called Storage"},{"line_number":1159,"context_line":"Resource Pools (SRP). Typically there is only one SRP, however there can be"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_9acb291e","line":1156,"updated":"2016-09-15 06:59:08.000000000","message":"Change out the first \u0027which\u0027 for \u0027that\u0027, change out the \u0027/\u0027 for \u0027and\u0027, add a comma, change to present tense -\n\n \"Each has a set of workload characteristics that determine the drive types and mixes, which VMAX3 uses for the SLO.\"","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"fb4fce086630c292a73f4ed0ed75f7090d7842c9","unresolved":false,"context_lines":[{"line_number":1153,"context_line":"VMAX3 allows you to manage application storage by using Service Level"},{"line_number":1154,"context_line":"Objectives (SLO) using policy based automation rather than the tiering in the"},{"line_number":1155,"context_line":"VMAX2. The VMAX3 Hybrid comes with up to 6 SLO policies defined. Each has a"},{"line_number":1156,"context_line":"set of workload characteristics which determine the drive types/mixes which"},{"line_number":1157,"context_line":"will be used for the SLO. All storage in the VMAX3 Array is virtually"},{"line_number":1158,"context_line":"provisioned, and all of the pools are created in containers called Storage"},{"line_number":1159,"context_line":"Resource Pools (SRP). Typically there is only one SRP, however there can be"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_c2cf707d","line":1156,"in_reply_to":"7a8ec9b2_9acb291e","updated":"2016-09-15 13:41:22.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"9eb7b0a73f599f9b313ad065aa274a6ccd247a3c","unresolved":false,"context_lines":[{"line_number":1163,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":1164,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"},{"line_number":1165,"context_line":"that of the entire SRP. This can cause issues as it can never be an accurate"},{"line_number":1166,"context_line":"representation of what storage is available for any given SLO/Workload"},{"line_number":1167,"context_line":"combination."},{"line_number":1168,"context_line":""},{"line_number":1169,"context_line":"Enabling WLP on Unisphere"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_3afe9537","line":1166,"updated":"2016-09-15 06:59:08.000000000","message":"Switch out the \u0027/\u0027 for \u0027and\u0027 here.","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"fb4fce086630c292a73f4ed0ed75f7090d7842c9","unresolved":false,"context_lines":[{"line_number":1163,"context_line":"The SLO capacity is retrieved by interfacing with Unisphere Workload Planner"},{"line_number":1164,"context_line":"(WLP). If you do not set up this relationship then the capacity retrieved is"},{"line_number":1165,"context_line":"that of the entire SRP. This can cause issues as it can never be an accurate"},{"line_number":1166,"context_line":"representation of what storage is available for any given SLO/Workload"},{"line_number":1167,"context_line":"combination."},{"line_number":1168,"context_line":""},{"line_number":1169,"context_line":"Enabling WLP on Unisphere"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_02ca386d","line":1166,"in_reply_to":"7a8ec9b2_3afe9537","updated":"2016-09-15 13:41:22.000000000","message":"ok","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"9eb7b0a73f599f9b313ad065aa274a6ccd247a3c","unresolved":false,"context_lines":[{"line_number":1178,"context_line":""},{"line_number":1179,"context_line":"   This should be set up ahead of time (allowing for several hours of data"},{"line_number":1180,"context_line":"   collection), so that the Unisphere for VMAX Performance Analyzer can"},{"line_number":1181,"context_line":"   collect rated metrics for each of the supported ElementTypes."},{"line_number":1182,"context_line":""},{"line_number":1183,"context_line":"Using TestSmiProvider to add statistics access point"},{"line_number":1184,"context_line":"----------------------------------------------------"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_1a5b9955","line":1181,"updated":"2016-09-15 06:59:08.000000000","message":"Add a space here - \"Element Types\"","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"fb4fce086630c292a73f4ed0ed75f7090d7842c9","unresolved":false,"context_lines":[{"line_number":1178,"context_line":""},{"line_number":1179,"context_line":"   This should be set up ahead of time (allowing for several hours of data"},{"line_number":1180,"context_line":"   collection), so that the Unisphere for VMAX Performance Analyzer can"},{"line_number":1181,"context_line":"   collect rated metrics for each of the supported ElementTypes."},{"line_number":1182,"context_line":""},{"line_number":1183,"context_line":"Using TestSmiProvider to add statistics access point"},{"line_number":1184,"context_line":"----------------------------------------------------"}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_8283a803","line":1181,"in_reply_to":"7a8ec9b2_1a5b9955","updated":"2016-09-15 13:41:22.000000000","message":"ok.  Thank you for the feedback","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10607,"name":"Alexandra Settle","email":"a.settle@outlook.com","username":"asettle"},"change_message_id":"88ce5f738009310d104bb1bb6b3ff72e263a6c4b","unresolved":false,"context_lines":[{"line_number":1205,"context_line":"      Password [smc]: ?"},{"line_number":1206,"context_line":"      Note: Enter the Unisphere for VMAX password."},{"line_number":1207,"context_line":""},{"line_number":1208,"context_line":"#. Type ``reg`` again to view the current list"},{"line_number":1209,"context_line":""},{"line_number":1210,"context_line":"   .. code-block:: console"},{"line_number":1211,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_8191b8f3","line":1208,"range":{"start_line":1208,"start_character":42,"end_line":1208,"end_character":46},"updated":"2016-09-16 09:48:04.000000000","message":"list: *","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"5a0bd48504bf26f7c98a640604d74ab730b1799c","unresolved":false,"context_lines":[{"line_number":1205,"context_line":"      Password [smc]: ?"},{"line_number":1206,"context_line":"      Note: Enter the Unisphere for VMAX password."},{"line_number":1207,"context_line":""},{"line_number":1208,"context_line":"#. Type ``reg`` again to view the current list"},{"line_number":1209,"context_line":""},{"line_number":1210,"context_line":"   .. code-block:: console"},{"line_number":1211,"context_line":""}],"source_content_type":"text/x-rst","patch_set":15,"id":"7a8ec9b2_dc23a656","line":1208,"range":{"start_line":1208,"start_character":42,"end_line":1208,"end_character":46},"in_reply_to":"7a8ec9b2_8191b8f3","updated":"2016-09-16 10:40:19.000000000","message":"ok. Thanks for the feedback.","commit_id":"e1aebc572120be6615d4687082ee499f7ab5d57c"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":469,"context_line":""},{"line_number":470,"context_line":"VMAX2"},{"line_number":471,"context_line":""},{"line_number":472,"context_line":".. code-block:: none"},{"line_number":473,"context_line":""},{"line_number":474,"context_line":"   OS-[shortHostName]-[poolName]-[protocol]-SG"},{"line_number":475,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_bf8f6f73","line":472,"range":{"start_line":472,"start_character":16,"end_line":472,"end_character":20},"updated":"2016-09-19 00:35:54.000000000","message":"s/none/ini","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":469,"context_line":""},{"line_number":470,"context_line":"VMAX2"},{"line_number":471,"context_line":""},{"line_number":472,"context_line":".. code-block:: none"},{"line_number":473,"context_line":""},{"line_number":474,"context_line":"   OS-[shortHostName]-[poolName]-[protocol]-SG"},{"line_number":475,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_149e6107","line":472,"range":{"start_line":472,"start_character":16,"end_line":472,"end_character":20},"in_reply_to":"7a8ec9b2_bf8f6f73","updated":"2016-09-19 15:25:07.000000000","message":"should I put ini here, it is not a configuration file entry. It is to highlight a naming terminology.  A note perhaps?","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":475,"context_line":""},{"line_number":476,"context_line":"VMAX2 (where FAST policy is used)"},{"line_number":477,"context_line":""},{"line_number":478,"context_line":".. code-block:: none"},{"line_number":479,"context_line":""},{"line_number":480,"context_line":"   OS-[shortHostName]-[fastPolicy]-[protocol]-SG"},{"line_number":481,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_df8a7b63","line":478,"range":{"start_line":478,"start_character":16,"end_line":478,"end_character":20},"updated":"2016-09-19 00:35:54.000000000","message":"s/none/ini","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":481,"context_line":""},{"line_number":482,"context_line":"VMAX3"},{"line_number":483,"context_line":""},{"line_number":484,"context_line":".. code-block:: none"},{"line_number":485,"context_line":""},{"line_number":486,"context_line":"   OS-[shortHostName]-[SRP]-[SLO]-[Workload]-[protocol]-SG"},{"line_number":487,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_ffebb710","line":484,"range":{"start_line":484,"start_character":16,"end_line":484,"end_character":20},"updated":"2016-09-19 00:35:54.000000000","message":"s/none/ini","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":532,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":533,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":534,"context_line":""},{"line_number":535,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":536,"context_line":"   to the back end block:"},{"line_number":537,"context_line":""},{"line_number":538,"context_line":"   .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_ff7657a2","line":535,"range":{"start_line":535,"start_character":10,"end_line":535,"end_character":25},"updated":"2016-09-19 00:35:54.000000000","message":"the :file:`/etc/cinder/cinder.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":532,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":533,"context_line":"      # dpkg-reconfigure ca-certificates"},{"line_number":534,"context_line":""},{"line_number":535,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":536,"context_line":"   to the back end block:"},{"line_number":537,"context_line":""},{"line_number":538,"context_line":"   .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_b48f6dcb","line":535,"range":{"start_line":535,"start_character":10,"end_line":535,"end_character":25},"in_reply_to":"7a8ec9b2_ff7657a2","updated":"2016-09-19 15:25:07.000000000","message":"Sure, I will change this","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":535,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":536,"context_line":"   to the back end block:"},{"line_number":537,"context_line":""},{"line_number":538,"context_line":"   .. code-block:: none"},{"line_number":539,"context_line":""},{"line_number":540,"context_line":"      driver_ssl_cert_verify \u003d False"},{"line_number":541,"context_line":"      driver_use_ssl \u003d True"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_3f7b5f7c","line":538,"range":{"start_line":538,"start_character":19,"end_line":538,"end_character":23},"updated":"2016-09-19 00:35:54.000000000","message":"s/none/ini","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":535,"context_line":"#. Update ``cinder.conf`` to reflect SSL functionality by adding the following"},{"line_number":536,"context_line":"   to the back end block:"},{"line_number":537,"context_line":""},{"line_number":538,"context_line":"   .. code-block:: none"},{"line_number":539,"context_line":""},{"line_number":540,"context_line":"      driver_ssl_cert_verify \u003d False"},{"line_number":541,"context_line":"      driver_use_ssl \u003d True"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_34ba7d6f","line":538,"range":{"start_line":538,"start_character":19,"end_line":538,"end_character":23},"in_reply_to":"7a8ec9b2_3f7b5f7c","updated":"2016-09-19 15:25:07.000000000","message":"This is an ini, I will change it","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":547,"context_line":"Oversubscription support"},{"line_number":548,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":549,"context_line":""},{"line_number":550,"context_line":"Oversubscription support requires the ``/etc/cinder/cinder.conf`` to be"},{"line_number":551,"context_line":"updated with two additional tags ``max_over_subscription_ratio`` and"},{"line_number":552,"context_line":"``reserved_percentage``. In the sample below, the value of 2.0 for"},{"line_number":553,"context_line":"``max_over_subscription_ratio`` means that the pools in oversubscribed by a"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_2450b231","line":550,"range":{"start_line":550,"start_character":38,"end_line":550,"end_character":64},"updated":"2016-09-19 00:35:54.000000000","message":":file:`/etc/cinder/cinder.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":547,"context_line":"Oversubscription support"},{"line_number":548,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":549,"context_line":""},{"line_number":550,"context_line":"Oversubscription support requires the ``/etc/cinder/cinder.conf`` to be"},{"line_number":551,"context_line":"updated with two additional tags ``max_over_subscription_ratio`` and"},{"line_number":552,"context_line":"``reserved_percentage``. In the sample below, the value of 2.0 for"},{"line_number":553,"context_line":"``max_over_subscription_ratio`` means that the pools in oversubscribed by a"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_146ca107","line":550,"range":{"start_line":550,"start_character":38,"end_line":550,"end_character":64},"in_reply_to":"7a8ec9b2_2450b231","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":562,"context_line":"optional."},{"line_number":563,"context_line":""},{"line_number":564,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":565,"context_line":"``/etc/cinder/cinder.conf``."},{"line_number":566,"context_line":""},{"line_number":567,"context_line":".. code-block:: ini"},{"line_number":568,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_4443fe6b","line":565,"range":{"start_line":565,"start_character":0,"end_line":565,"end_character":27},"updated":"2016-09-19 00:35:54.000000000","message":":file:`/etc/cinder/cinder.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":562,"context_line":"optional."},{"line_number":563,"context_line":""},{"line_number":564,"context_line":"To set these parameter go to the configuration group of the volume type in"},{"line_number":565,"context_line":"``/etc/cinder/cinder.conf``."},{"line_number":566,"context_line":""},{"line_number":567,"context_line":".. code-block:: ini"},{"line_number":568,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_747325e8","line":565,"range":{"start_line":565,"start_character":0,"end_line":565,"end_character":27},"in_reply_to":"7a8ec9b2_4443fe6b","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":574,"context_line":"    reserved_percentage \u003d 10"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"For the second iteration of over subscription, take into account the"},{"line_number":577,"context_line":"EMCMaxSubscriptionPercent property on the pool. This value is the highest"},{"line_number":578,"context_line":"that a pool can be oversubscribed."},{"line_number":579,"context_line":""},{"line_number":580,"context_line":"Scenario 1"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_64463a7c","line":577,"range":{"start_line":577,"start_character":0,"end_line":577,"end_character":25},"updated":"2016-09-19 00:35:54.000000000","message":"``EMCMaxSubscriptionPercent``\nApply this change throughout.","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":574,"context_line":"    reserved_percentage \u003d 10"},{"line_number":575,"context_line":""},{"line_number":576,"context_line":"For the second iteration of over subscription, take into account the"},{"line_number":577,"context_line":"EMCMaxSubscriptionPercent property on the pool. This value is the highest"},{"line_number":578,"context_line":"that a pool can be oversubscribed."},{"line_number":579,"context_line":""},{"line_number":580,"context_line":"Scenario 1"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_545d4947","line":577,"range":{"start_line":577,"start_character":0,"end_line":577,"end_character":25},"in_reply_to":"7a8ec9b2_64463a7c","updated":"2016-09-19 15:25:07.000000000","message":"Ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":659,"context_line":""},{"line_number":660,"context_line":"   .. code-block:: console"},{"line_number":661,"context_line":""},{"line_number":662,"context_line":"       cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":663,"context_line":""},{"line_number":664,"context_line":"   .. code-block:: console"},{"line_number":665,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_a45cc24b","line":662,"range":{"start_line":662,"start_character":6,"end_line":662,"end_character":7},"updated":"2016-09-19 00:35:54.000000000","message":"For consistency, add \"$\". Also on lines 672, 682, 724, 734, 744, 783, 794, 804, 841, 851, 862","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":659,"context_line":""},{"line_number":660,"context_line":"   .. code-block:: console"},{"line_number":661,"context_line":""},{"line_number":662,"context_line":"       cinder qos-create \u003cname\u003e \u003ckey\u003dvalue\u003e [\u003ckey\u003dvalue\u003e ...]"},{"line_number":663,"context_line":""},{"line_number":664,"context_line":"   .. code-block:: console"},{"line_number":665,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_745a4552","line":662,"range":{"start_line":662,"start_character":6,"end_line":662,"end_character":7},"in_reply_to":"7a8ec9b2_a45cc24b","updated":"2016-09-19 15:25:07.000000000","message":"Will do","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":717,"context_line":" |  DistributionType | Always |"},{"line_number":718,"context_line":" +-------------------+--------+"},{"line_number":719,"context_line":""},{"line_number":720,"context_line":"#. Create QoS Specs with the prerequisite values above:"},{"line_number":721,"context_line":""},{"line_number":722,"context_line":"   .. code-block:: console"},{"line_number":723,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_bf1ccf6a","line":720,"range":{"start_line":720,"start_character":14,"end_line":720,"end_character":19},"updated":"2016-09-19 00:35:54.000000000","message":"specifications","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":717,"context_line":" |  DistributionType | Always |"},{"line_number":718,"context_line":" +-------------------+--------+"},{"line_number":719,"context_line":""},{"line_number":720,"context_line":"#. Create QoS Specs with the prerequisite values above:"},{"line_number":721,"context_line":""},{"line_number":722,"context_line":"   .. code-block:: console"},{"line_number":723,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_d42f99a5","line":720,"range":{"start_line":720,"start_character":14,"end_line":720,"end_character":19},"in_reply_to":"7a8ec9b2_bf1ccf6a","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":727,"context_line":""},{"line_number":728,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":729,"context_line":""},{"line_number":730,"context_line":"#. Associate QoS specs with specified volume type:"},{"line_number":731,"context_line":""},{"line_number":732,"context_line":"   .. code-block:: console"},{"line_number":733,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_df17db42","line":730,"range":{"start_line":730,"start_character":17,"end_line":730,"end_character":22},"updated":"2016-09-19 00:35:54.000000000","message":"specifications","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":727,"context_line":""},{"line_number":728,"context_line":"       $ cinder qos-create silver maxIOPS\u003d4000 maxMBPS\u003d4000 DistributionType\u003dAlways"},{"line_number":729,"context_line":""},{"line_number":730,"context_line":"#. Associate QoS specs with specified volume type:"},{"line_number":731,"context_line":""},{"line_number":732,"context_line":"   .. code-block:: console"},{"line_number":733,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_143ae1e7","line":730,"range":{"start_line":730,"start_character":17,"end_line":730,"end_character":22},"in_reply_to":"7a8ec9b2_df17db42","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":776,"context_line":" |  DistributionType | Always |"},{"line_number":777,"context_line":" +-------------------+--------+"},{"line_number":778,"context_line":""},{"line_number":779,"context_line":"#. Create QoS Specs with the prerequisite values above:"},{"line_number":780,"context_line":""},{"line_number":781,"context_line":"   .. code-block:: console"},{"line_number":782,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_3f1fdf5b","line":779,"range":{"start_line":779,"start_character":14,"end_line":779,"end_character":19},"updated":"2016-09-19 00:35:54.000000000","message":"specifications","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":776,"context_line":" |  DistributionType | Always |"},{"line_number":777,"context_line":" +-------------------+--------+"},{"line_number":778,"context_line":""},{"line_number":779,"context_line":"#. Create QoS Specs with the prerequisite values above:"},{"line_number":780,"context_line":""},{"line_number":781,"context_line":"   .. code-block:: console"},{"line_number":782,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_742165b4","line":779,"range":{"start_line":779,"start_character":14,"end_line":779,"end_character":19},"in_reply_to":"7a8ec9b2_3f1fdf5b","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":787,"context_line":"       $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":788,"context_line":""},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"#. Associate QoS specs with specified volume type:"},{"line_number":791,"context_line":""},{"line_number":792,"context_line":"   .. code-block:: console"},{"line_number":793,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_5f22eba3","line":790,"range":{"start_line":790,"start_character":17,"end_line":790,"end_character":22},"updated":"2016-09-19 00:35:54.000000000","message":"specifications","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":787,"context_line":"       $ cinder qos-create silver DistributionType\u003dAlways"},{"line_number":788,"context_line":""},{"line_number":789,"context_line":""},{"line_number":790,"context_line":"#. Associate QoS specs with specified volume type:"},{"line_number":791,"context_line":""},{"line_number":792,"context_line":"   .. code-block:: console"},{"line_number":793,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_d416b957","line":790,"range":{"start_line":790,"start_character":17,"end_line":790,"end_character":22},"in_reply_to":"7a8ec9b2_5f22eba3","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":916,"context_line":""},{"line_number":917,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":918,"context_line":"performance. Log in as a privileged user and make the following changes to"},{"line_number":919,"context_line":"``/etc/multipath.conf`` on Compute (nova) node(s)."},{"line_number":920,"context_line":""},{"line_number":921,"context_line":".. code-block:: ini"},{"line_number":922,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_643d5adc","line":919,"range":{"start_line":919,"start_character":1,"end_line":919,"end_character":23},"updated":"2016-09-19 00:35:54.000000000","message":":file:`/etc/multipath.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":916,"context_line":""},{"line_number":917,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":918,"context_line":"performance. Log in as a privileged user and make the following changes to"},{"line_number":919,"context_line":"``/etc/multipath.conf`` on Compute (nova) node(s)."},{"line_number":920,"context_line":""},{"line_number":921,"context_line":".. code-block:: ini"},{"line_number":922,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_a423e2bb","line":919,"range":{"start_line":919,"start_character":26,"end_line":919,"end_character":27},"updated":"2016-09-19 00:35:54.000000000","message":"the","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":916,"context_line":""},{"line_number":917,"context_line":"The multipath configuration file may be edited for better management and"},{"line_number":918,"context_line":"performance. Log in as a privileged user and make the following changes to"},{"line_number":919,"context_line":"``/etc/multipath.conf`` on Compute (nova) node(s)."},{"line_number":920,"context_line":""},{"line_number":921,"context_line":".. code-block:: ini"},{"line_number":922,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_540b892b","line":919,"range":{"start_line":919,"start_character":26,"end_line":919,"end_character":27},"in_reply_to":"7a8ec9b2_a423e2bb","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":971,"context_line":"------------------------"},{"line_number":972,"context_line":""},{"line_number":973,"context_line":"On Compute (nova) node, add the following flag in the ``[libvirt]`` section of"},{"line_number":974,"context_line":"``/etc/nova/nova.conf``:"},{"line_number":975,"context_line":""},{"line_number":976,"context_line":".. code-block:: ini"},{"line_number":977,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_c42e2ea4","line":974,"range":{"start_line":974,"start_character":0,"end_line":974,"end_character":23},"updated":"2016-09-19 00:35:54.000000000","message":":file:`/etc/nova/nova.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":971,"context_line":"------------------------"},{"line_number":972,"context_line":""},{"line_number":973,"context_line":"On Compute (nova) node, add the following flag in the ``[libvirt]`` section of"},{"line_number":974,"context_line":"``/etc/nova/nova.conf``:"},{"line_number":975,"context_line":""},{"line_number":976,"context_line":".. code-block:: ini"},{"line_number":977,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_b4020d0a","line":974,"range":{"start_line":974,"start_character":0,"end_line":974,"end_character":23},"in_reply_to":"7a8ec9b2_c42e2ea4","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":978,"context_line":"   iscsi_use_multipath \u003d True"},{"line_number":979,"context_line":""},{"line_number":980,"context_line":"On cinder controller node, set the multipath flag to true in"},{"line_number":981,"context_line":"``/etc/cinder.conf``"},{"line_number":982,"context_line":""},{"line_number":983,"context_line":".. code-block:: ini"},{"line_number":984,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_e4296a9c","line":981,"range":{"start_line":981,"start_character":0,"end_line":981,"end_character":19},"updated":"2016-09-19 00:35:54.000000000","message":":file:`/etc/cinder.conf` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":978,"context_line":"   iscsi_use_multipath \u003d True"},{"line_number":979,"context_line":""},{"line_number":980,"context_line":"On cinder controller node, set the multipath flag to true in"},{"line_number":981,"context_line":"``/etc/cinder.conf``"},{"line_number":982,"context_line":""},{"line_number":983,"context_line":".. code-block:: ini"},{"line_number":984,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_cffd420a","line":981,"range":{"start_line":981,"start_character":0,"end_line":981,"end_character":19},"in_reply_to":"7a8ec9b2_e4296a9c","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":1021,"context_line":"Consistency Groups operations are performed through the CLI using v2 of"},{"line_number":1022,"context_line":"the cinder API."},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups."},{"line_number":1026,"context_line":""},{"line_number":1027,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_241ef26f","line":1024,"range":{"start_line":1024,"start_character":0,"end_line":1024,"end_character":27},"updated":"2016-09-19 00:35:54.000000000","message":"The :file:`/etc/cinder/policy.json` file","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":1021,"context_line":"Consistency Groups operations are performed through the CLI using v2 of"},{"line_number":1022,"context_line":"the cinder API."},{"line_number":1023,"context_line":""},{"line_number":1024,"context_line":"``/etc/cinder/policy.json`` may need to be updated to enable new API calls"},{"line_number":1025,"context_line":"for Consistency groups."},{"line_number":1026,"context_line":""},{"line_number":1027,"context_line":".. note::"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_4f12125a","line":1024,"range":{"start_line":1024,"start_character":0,"end_line":1024,"end_character":27},"in_reply_to":"7a8ec9b2_241ef26f","updated":"2016-09-19 15:25:07.000000000","message":"ok","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":1135,"context_line":"      $ cinder consisgroup-create-from-src --source-cg 25dae184-1f25-412b-b8d7-9a25698fdb6d"},{"line_number":1136,"context_line":""},{"line_number":1137,"context_line":""},{"line_number":1138,"context_line":"#. You can also create a volume in a consistency group in one step:"},{"line_number":1139,"context_line":""},{"line_number":1140,"context_line":"   .. code-block:: console"},{"line_number":1141,"context_line":""}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_5f590b34","line":1138,"range":{"start_line":1138,"start_character":37,"end_line":1138,"end_character":54},"updated":"2016-09-19 00:35:54.000000000","message":"Check capitalization of this term","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":10705,"name":"Darren Chan","email":"dazzachan@yahoo.com.au","username":"daz"},"change_message_id":"41c6765015208c59a51acb0f3a27883ff5038d9f","unresolved":false,"context_lines":[{"line_number":1033,"context_line":"Operations"},{"line_number":1034,"context_line":"----------"},{"line_number":1035,"context_line":""},{"line_number":1036,"context_line":"#. Create a Consistency Group:"},{"line_number":1037,"context_line":""},{"line_number":1038,"context_line":"   .. code-block:: console"},{"line_number":1039,"context_line":""},{"line_number":1040,"context_line":"      cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":1041,"context_line":"      [--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":1042,"context_line":"      \u003cvolume-types\u003e"},{"line_number":1043,"context_line":""},{"line_number":1044,"context_line":"   .. code-block:: console"},{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"      $ cinder --os-volume-api-version 2 consisgroup-create --name bronzeCG2 volume_type_1"},{"line_number":1047,"context_line":""},{"line_number":1048,"context_line":"#. List Consistency Groups:"},{"line_number":1049,"context_line":""},{"line_number":1050,"context_line":"   .. code-block:: console"},{"line_number":1051,"context_line":""},{"line_number":1052,"context_line":"      cinder consisgroup-list [--all-tenants [\u003c0|1\u003e]]"},{"line_number":1053,"context_line":""},{"line_number":1054,"context_line":"   .. code-block:: console"},{"line_number":1055,"context_line":""},{"line_number":1056,"context_line":"      $ cinder consisgroup-list"},{"line_number":1057,"context_line":""},{"line_number":1058,"context_line":"#. Show a Consistency Group:"},{"line_number":1059,"context_line":""},{"line_number":1060,"context_line":"   .. code-block:: console"},{"line_number":1061,"context_line":""},{"line_number":1062,"context_line":"      cinder consisgroup-show \u003cconsistencygroup\u003e"},{"line_number":1063,"context_line":""},{"line_number":1064,"context_line":"   .. code-block:: console"},{"line_number":1065,"context_line":""},{"line_number":1066,"context_line":"      $ cinder consisgroup-show 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1067,"context_line":""},{"line_number":1068,"context_line":"#. Update a consistency Group:"},{"line_number":1069,"context_line":""},{"line_number":1070,"context_line":"   .. code-block:: console"},{"line_number":1071,"context_line":""},{"line_number":1072,"context_line":"      cinder consisgroup-update [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1073,"context_line":"      [--add-volumes \u003cuuid1,uuid2,......\u003e] [--remove-volumes \u003cuuid3,uuid4,......\u003e]"},{"line_number":1074,"context_line":"      \u003cconsistencygroup\u003e"},{"line_number":1075,"context_line":""},{"line_number":1076,"context_line":"   Change name:"},{"line_number":1077,"context_line":""},{"line_number":1078,"context_line":"   .. code-block:: console"},{"line_number":1079,"context_line":""},{"line_number":1080,"context_line":"      $ cinder consisgroup-update --name updated_name 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1081,"context_line":""},{"line_number":1082,"context_line":"   Add volume(s) to a Consistency Group:"},{"line_number":1083,"context_line":""},{"line_number":1084,"context_line":"   .. code-block:: console"},{"line_number":1085,"context_line":""},{"line_number":1086,"context_line":"      $ cinder consisgroup-update --add-volumes af1ae89b-564b-4c7f-92d9-c54a2243a5fe 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1087,"context_line":""},{"line_number":1088,"context_line":"   Delete volume(s) from a Consistency Group:"},{"line_number":1089,"context_line":""},{"line_number":1090,"context_line":"   .. code-block:: console"},{"line_number":1091,"context_line":""},{"line_number":1092,"context_line":"      $ cinder consisgroup-update --remove-volumes af1ae89b-564b-4c7f-92d9-c54a2243a5fe 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1093,"context_line":""},{"line_number":1094,"context_line":"#. Create a snapshot of a Consistency Group:"},{"line_number":1095,"context_line":""},{"line_number":1096,"context_line":"   .. code-block:: console"},{"line_number":1097,"context_line":""},{"line_number":1098,"context_line":"      cinder cgsnapshot-create [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1099,"context_line":"      \u003cconsistencygroup\u003e"},{"line_number":1100,"context_line":""},{"line_number":1101,"context_line":"   .. code-block:: console"},{"line_number":1102,"context_line":""},{"line_number":1103,"context_line":"      $ cinder cgsnapshot-create 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1104,"context_line":""},{"line_number":1105,"context_line":"#. Delete a snapshot of a Consistency Group:"},{"line_number":1106,"context_line":""},{"line_number":1107,"context_line":"   .. code-block:: console"},{"line_number":1108,"context_line":""},{"line_number":1109,"context_line":"      cinder cgsnapshot-delete \u003ccgsnapshot\u003e [\u003ccgsnapshot\u003e ...]"},{"line_number":1110,"context_line":""},{"line_number":1111,"context_line":"   .. code-block:: console"},{"line_number":1112,"context_line":""},{"line_number":1113,"context_line":"      $ cinder cgsnapshot-delete 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1114,"context_line":""},{"line_number":1115,"context_line":"#. Delete a Consistency Group:"},{"line_number":1116,"context_line":""},{"line_number":1117,"context_line":"   .. code-block:: console"},{"line_number":1118,"context_line":""},{"line_number":1119,"context_line":"      cinder consisgroup-delete [--force] \u003cconsistencygroup\u003e [\u003cconsistencygroup\u003e ...]"},{"line_number":1120,"context_line":""},{"line_number":1121,"context_line":"   .. code-block:: console"},{"line_number":1122,"context_line":""},{"line_number":1123,"context_line":"      $ cinder consisgroup-delete --force 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1124,"context_line":""},{"line_number":1125,"context_line":"#. Create a Consistency group from source (the source can only be a CG"},{"line_number":1126,"context_line":"   snapshot):"},{"line_number":1127,"context_line":""},{"line_number":1128,"context_line":"   .. code-block:: console"},{"line_number":1129,"context_line":""},{"line_number":1130,"context_line":"      cinder consisgroup-create-from-src [--cgsnapshot \u003ccgsnapshot\u003e]"},{"line_number":1131,"context_line":"      [--source-cg \u003csource-cg\u003e] [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1132,"context_line":""},{"line_number":1133,"context_line":"   .. code-block:: console"},{"line_number":1134,"context_line":""},{"line_number":1135,"context_line":"      $ cinder consisgroup-create-from-src --source-cg 25dae184-1f25-412b-b8d7-9a25698fdb6d"},{"line_number":1136,"context_line":""},{"line_number":1137,"context_line":""},{"line_number":1138,"context_line":"#. You can also create a volume in a consistency group in one step:"},{"line_number":1139,"context_line":""},{"line_number":1140,"context_line":"   .. code-block:: console"},{"line_number":1141,"context_line":""},{"line_number":1142,"context_line":"      cinder create [--consisgroup-id \u003cconsistencygroup-id\u003e] [--name \u003cname\u003e]"},{"line_number":1143,"context_line":"      [--description \u003cdescription\u003e] [--volume-type \u003cvolume-type\u003e]"},{"line_number":1144,"context_line":"      [--availability-zone \u003cavailability-zone\u003e] \u003csize\u003e"},{"line_number":1145,"context_line":""},{"line_number":1146,"context_line":"   .. code-block:: console"},{"line_number":1147,"context_line":""},{"line_number":1148,"context_line":"      $ cinder create --volume-type volume_type_1 --name cgBronzeVol --consisgroup-id 1de80c27-3b2f-47a6-91a7-e867cbe36462 1"},{"line_number":1149,"context_line":""},{"line_number":1150,"context_line":"Workload Planner (WLP)"},{"line_number":1151,"context_line":"~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_7f16c74c","line":1148,"range":{"start_line":1036,"start_character":0,"end_line":1148,"end_character":124},"updated":"2016-09-19 00:35:54.000000000","message":"Make this a bullet list, or a table using the list-table directive. See http://docs.openstack.org/contributor-guide/rst-conv/tables.html","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"},{"author":{"_account_id":12670,"name":"Helen Walsh","email":"helen.walsh@emc.com","username":"walshh2"},"change_message_id":"07dbf241b47b51ced5036edb6c4176ea48637a51","unresolved":false,"context_lines":[{"line_number":1033,"context_line":"Operations"},{"line_number":1034,"context_line":"----------"},{"line_number":1035,"context_line":""},{"line_number":1036,"context_line":"#. Create a Consistency Group:"},{"line_number":1037,"context_line":""},{"line_number":1038,"context_line":"   .. code-block:: console"},{"line_number":1039,"context_line":""},{"line_number":1040,"context_line":"      cinder --os-volume-api-version 2 consisgroup-create [--name \u003cname\u003e]"},{"line_number":1041,"context_line":"      [--description \u003cdescription\u003e] [--availability-zone \u003cavailability-zone\u003e]"},{"line_number":1042,"context_line":"      \u003cvolume-types\u003e"},{"line_number":1043,"context_line":""},{"line_number":1044,"context_line":"   .. code-block:: console"},{"line_number":1045,"context_line":""},{"line_number":1046,"context_line":"      $ cinder --os-volume-api-version 2 consisgroup-create --name bronzeCG2 volume_type_1"},{"line_number":1047,"context_line":""},{"line_number":1048,"context_line":"#. List Consistency Groups:"},{"line_number":1049,"context_line":""},{"line_number":1050,"context_line":"   .. code-block:: console"},{"line_number":1051,"context_line":""},{"line_number":1052,"context_line":"      cinder consisgroup-list [--all-tenants [\u003c0|1\u003e]]"},{"line_number":1053,"context_line":""},{"line_number":1054,"context_line":"   .. code-block:: console"},{"line_number":1055,"context_line":""},{"line_number":1056,"context_line":"      $ cinder consisgroup-list"},{"line_number":1057,"context_line":""},{"line_number":1058,"context_line":"#. Show a Consistency Group:"},{"line_number":1059,"context_line":""},{"line_number":1060,"context_line":"   .. code-block:: console"},{"line_number":1061,"context_line":""},{"line_number":1062,"context_line":"      cinder consisgroup-show \u003cconsistencygroup\u003e"},{"line_number":1063,"context_line":""},{"line_number":1064,"context_line":"   .. code-block:: console"},{"line_number":1065,"context_line":""},{"line_number":1066,"context_line":"      $ cinder consisgroup-show 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1067,"context_line":""},{"line_number":1068,"context_line":"#. Update a consistency Group:"},{"line_number":1069,"context_line":""},{"line_number":1070,"context_line":"   .. code-block:: console"},{"line_number":1071,"context_line":""},{"line_number":1072,"context_line":"      cinder consisgroup-update [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1073,"context_line":"      [--add-volumes \u003cuuid1,uuid2,......\u003e] [--remove-volumes \u003cuuid3,uuid4,......\u003e]"},{"line_number":1074,"context_line":"      \u003cconsistencygroup\u003e"},{"line_number":1075,"context_line":""},{"line_number":1076,"context_line":"   Change name:"},{"line_number":1077,"context_line":""},{"line_number":1078,"context_line":"   .. code-block:: console"},{"line_number":1079,"context_line":""},{"line_number":1080,"context_line":"      $ cinder consisgroup-update --name updated_name 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1081,"context_line":""},{"line_number":1082,"context_line":"   Add volume(s) to a Consistency Group:"},{"line_number":1083,"context_line":""},{"line_number":1084,"context_line":"   .. code-block:: console"},{"line_number":1085,"context_line":""},{"line_number":1086,"context_line":"      $ cinder consisgroup-update --add-volumes af1ae89b-564b-4c7f-92d9-c54a2243a5fe 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1087,"context_line":""},{"line_number":1088,"context_line":"   Delete volume(s) from a Consistency Group:"},{"line_number":1089,"context_line":""},{"line_number":1090,"context_line":"   .. code-block:: console"},{"line_number":1091,"context_line":""},{"line_number":1092,"context_line":"      $ cinder consisgroup-update --remove-volumes af1ae89b-564b-4c7f-92d9-c54a2243a5fe 38a604b7-06eb-4202-8651-dbf2610a0827"},{"line_number":1093,"context_line":""},{"line_number":1094,"context_line":"#. Create a snapshot of a Consistency Group:"},{"line_number":1095,"context_line":""},{"line_number":1096,"context_line":"   .. code-block:: console"},{"line_number":1097,"context_line":""},{"line_number":1098,"context_line":"      cinder cgsnapshot-create [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1099,"context_line":"      \u003cconsistencygroup\u003e"},{"line_number":1100,"context_line":""},{"line_number":1101,"context_line":"   .. code-block:: console"},{"line_number":1102,"context_line":""},{"line_number":1103,"context_line":"      $ cinder cgsnapshot-create 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1104,"context_line":""},{"line_number":1105,"context_line":"#. Delete a snapshot of a Consistency Group:"},{"line_number":1106,"context_line":""},{"line_number":1107,"context_line":"   .. code-block:: console"},{"line_number":1108,"context_line":""},{"line_number":1109,"context_line":"      cinder cgsnapshot-delete \u003ccgsnapshot\u003e [\u003ccgsnapshot\u003e ...]"},{"line_number":1110,"context_line":""},{"line_number":1111,"context_line":"   .. code-block:: console"},{"line_number":1112,"context_line":""},{"line_number":1113,"context_line":"      $ cinder cgsnapshot-delete 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1114,"context_line":""},{"line_number":1115,"context_line":"#. Delete a Consistency Group:"},{"line_number":1116,"context_line":""},{"line_number":1117,"context_line":"   .. code-block:: console"},{"line_number":1118,"context_line":""},{"line_number":1119,"context_line":"      cinder consisgroup-delete [--force] \u003cconsistencygroup\u003e [\u003cconsistencygroup\u003e ...]"},{"line_number":1120,"context_line":""},{"line_number":1121,"context_line":"   .. code-block:: console"},{"line_number":1122,"context_line":""},{"line_number":1123,"context_line":"      $ cinder consisgroup-delete --force 618d962d-2917-4cca-a3ee-9699373e6625"},{"line_number":1124,"context_line":""},{"line_number":1125,"context_line":"#. Create a Consistency group from source (the source can only be a CG"},{"line_number":1126,"context_line":"   snapshot):"},{"line_number":1127,"context_line":""},{"line_number":1128,"context_line":"   .. code-block:: console"},{"line_number":1129,"context_line":""},{"line_number":1130,"context_line":"      cinder consisgroup-create-from-src [--cgsnapshot \u003ccgsnapshot\u003e]"},{"line_number":1131,"context_line":"      [--source-cg \u003csource-cg\u003e] [--name \u003cname\u003e] [--description \u003cdescription\u003e]"},{"line_number":1132,"context_line":""},{"line_number":1133,"context_line":"   .. code-block:: console"},{"line_number":1134,"context_line":""},{"line_number":1135,"context_line":"      $ cinder consisgroup-create-from-src --source-cg 25dae184-1f25-412b-b8d7-9a25698fdb6d"},{"line_number":1136,"context_line":""},{"line_number":1137,"context_line":""},{"line_number":1138,"context_line":"#. You can also create a volume in a consistency group in one step:"},{"line_number":1139,"context_line":""},{"line_number":1140,"context_line":"   .. code-block:: console"},{"line_number":1141,"context_line":""},{"line_number":1142,"context_line":"      cinder create [--consisgroup-id \u003cconsistencygroup-id\u003e] [--name \u003cname\u003e]"},{"line_number":1143,"context_line":"      [--description \u003cdescription\u003e] [--volume-type \u003cvolume-type\u003e]"},{"line_number":1144,"context_line":"      [--availability-zone \u003cavailability-zone\u003e] \u003csize\u003e"},{"line_number":1145,"context_line":""},{"line_number":1146,"context_line":"   .. code-block:: console"},{"line_number":1147,"context_line":""},{"line_number":1148,"context_line":"      $ cinder create --volume-type volume_type_1 --name cgBronzeVol --consisgroup-id 1de80c27-3b2f-47a6-91a7-e867cbe36462 1"},{"line_number":1149,"context_line":""},{"line_number":1150,"context_line":"Workload Planner (WLP)"},{"line_number":1151,"context_line":"~~~~~~~~~~~~~~~~~~~~~~"}],"source_content_type":"text/x-rst","patch_set":16,"id":"7a8ec9b2_4f3932d8","line":1148,"range":{"start_line":1036,"start_character":0,"end_line":1148,"end_character":124},"in_reply_to":"7a8ec9b2_7f16c74c","updated":"2016-09-19 15:25:07.000000000","message":"I think a bullet list is best suited.  Thanks for the feedback.","commit_id":"5c8b402ac61068bc98e732959fb4eabe2fa3d336"}]}