)]}'
{"doc/config-reference/source/block-storage/drivers/kaminario-driver.rst":[{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":3,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":4,"context_line":""},{"line_number":5,"context_line":"The high performance Kaminario K2 All Flash Array offers Block Storage services to OpenStack."},{"line_number":6,"context_line":"Using the driver, OpenStack Block Storage hosts can connect to one or more K2 storage arrays."},{"line_number":7,"context_line":"This documentation explains how to configure and connect the block storage nodes to one or more K2 Storage Array systems."},{"line_number":8,"context_line":""},{"line_number":9,"context_line":"Driver requirements"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_300a208b","line":6,"updated":"2016-10-20 07:30:55.000000000","message":"Lines need to wrap at 79 characters. Adjust the sentences in this file to wrap at 79 characters, since the sentence length is causing the niceness check build issue.","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":3,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":4,"context_line":""},{"line_number":5,"context_line":"The high performance Kaminario K2 All Flash Array offers Block Storage services to OpenStack."},{"line_number":6,"context_line":"Using the driver, OpenStack Block Storage hosts can connect to one or more K2 storage arrays."},{"line_number":7,"context_line":"This documentation explains how to configure and connect the block storage nodes to one or more K2 Storage Array systems."},{"line_number":8,"context_line":""},{"line_number":9,"context_line":"Driver requirements"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_becc418a","line":6,"in_reply_to":"fa6399be_300a208b","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":24,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":25,"context_line":""},{"line_number":26,"context_line":"If you do not set up your deployment to use multipath, the network connectivity of the array will use a single physical port."},{"line_number":27,"context_line":"This may significantly limit the available bandwidth and the high-availability and non-disruptive upgrade benefits provided by K2."},{"line_number":28,"context_line":"To enjoy these benefits, make sure you have multipath access on Compute and Block Storage Node."},{"line_number":29,"context_line":""},{"line_number":30,"context_line":"- Install Multipath Software on both Compute and Block Storage."}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_5032345f","line":27,"updated":"2016-10-20 07:30:55.000000000","message":"Switch to a list sentence style - \"..limit the available bandwidth, high-availability, and non disruptive-upgrade..\"","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":24,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":25,"context_line":""},{"line_number":26,"context_line":"If you do not set up your deployment to use multipath, the network connectivity of the array will use a single physical port."},{"line_number":27,"context_line":"This may significantly limit the available bandwidth and the high-availability and non-disruptive upgrade benefits provided by K2."},{"line_number":28,"context_line":"To enjoy these benefits, make sure you have multipath access on Compute and Block Storage Node."},{"line_number":29,"context_line":""},{"line_number":30,"context_line":"- Install Multipath Software on both Compute and Block Storage."}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_7eb629fa","line":27,"in_reply_to":"fa6399be_5032345f","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":38,"context_line":""},{"line_number":39,"context_line":""},{"line_number":40,"context_line":""},{"line_number":41,"context_line":"- In ``libvirt`` section of the ``nova.conf`` file, specify ``iscsi_use_multipath\u003dTrue`` ."},{"line_number":42,"context_line":"  This option is valid for both iSCSI and FC drivers."},{"line_number":43,"context_line":""},{"line_number":44,"context_line":"  Additional resources: Kaminario Host Configuration Guide for Linux (for configuring multipath)"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_f01a68c5","line":41,"updated":"2016-10-20 07:30:55.000000000","message":"add a \"the\" definite article - \"the ``libvert`` section\"","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":38,"context_line":""},{"line_number":39,"context_line":""},{"line_number":40,"context_line":""},{"line_number":41,"context_line":"- In ``libvirt`` section of the ``nova.conf`` file, specify ``iscsi_use_multipath\u003dTrue`` ."},{"line_number":42,"context_line":"  This option is valid for both iSCSI and FC drivers."},{"line_number":43,"context_line":""},{"line_number":44,"context_line":"  Additional resources: Kaminario Host Configuration Guide for Linux (for configuring multipath)"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_be93615a","line":41,"in_reply_to":"fa6399be_f01a68c5","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":43,"context_line":""},{"line_number":44,"context_line":"  Additional resources: Kaminario Host Configuration Guide for Linux (for configuring multipath)"},{"line_number":45,"context_line":""},{"line_number":46,"context_line":"- After adding above option in the ``nova.conf`` file, restart the Compute services for the changes to take effect."},{"line_number":47,"context_line":"  The following command is usually used for restarting the Compute service:"},{"line_number":48,"context_line":""},{"line_number":49,"context_line":"  .. code-block:: console"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_f029889c","line":46,"updated":"2016-10-20 07:30:55.000000000","message":"Switch to singular here \"..restart the compute service..\"","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":65,"context_line":"Kaminario K2 Block Storage driver configuration"},{"line_number":66,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":67,"context_line":""},{"line_number":68,"context_line":"This section details the steps to be followed for configuring the Kaminario Cinder Driver for FC or iSCSI."},{"line_number":69,"context_line":"This procedure refers to the configuration of a single back-end. In case of multiple back-ends,"},{"line_number":70,"context_line":"please refer to the ``Setting multiple K2 back-end storage systems`` section below."},{"line_number":71,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_730bc224","line":68,"updated":"2016-10-20 07:30:55.000000000","message":"Switch to active voice: \"This section details the steps required to configure the Kaminario Cinder Driver for FC or iSCSI\"","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":65,"context_line":"Kaminario K2 Block Storage driver configuration"},{"line_number":66,"context_line":"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"},{"line_number":67,"context_line":""},{"line_number":68,"context_line":"This section details the steps to be followed for configuring the Kaminario Cinder Driver for FC or iSCSI."},{"line_number":69,"context_line":"This procedure refers to the configuration of a single back-end. In case of multiple back-ends,"},{"line_number":70,"context_line":"please refer to the ``Setting multiple K2 back-end storage systems`` section below."},{"line_number":71,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_dee2d59f","line":68,"in_reply_to":"fa6399be_730bc224","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":208,"context_line":"- Add a Back-end group section for each back-end you wish to add."},{"line_number":209,"context_line":""},{"line_number":210,"context_line":""},{"line_number":211,"context_line":"- For each back-end group, enter the configuration options as described in step 3 in the Kaminario K2 Block Storage driver configuration procedure above. Note that several back ends may have the same volume_backend_name. In this case, the scheduler will decide which back-end to use for the creation of the volume. The name of the back-end is declared as an extra-specification of a volume type (such as, volume_backend_name\u003dLVM). When a volume is created, the scheduler chooses an appropriate back end to handle the request, according to the volume type specified by the user. "},{"line_number":212,"context_line":""},{"line_number":213,"context_line":"  See `\u003chttp://docs.openstack.org/admin-guide/blockstorage-multi-backend.html\u003e`_ for additional information."},{"line_number":214,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_f0dfc8d3","line":211,"updated":"2016-10-20 07:30:55.000000000","message":"This line has the trailing whitespace that is causing the niceness check issue.","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":222,"context_line":"~~~~~~~~~~~~~~~~~~~~~"},{"line_number":223,"context_line":""},{"line_number":224,"context_line":"Once the ``cinder.conf``  has been updated and the cinder volume service has been restarted, cinder commands need to be issued in order to create"},{"line_number":225,"context_line":"and associate OpenStack volume types with the declared ``volume_backend_names``. The Volume back-end names can be any user defined name."},{"line_number":226,"context_line":"For each volume type, you should specify an attribute that will determine if the volume type includes deduplication and/or replication."},{"line_number":227,"context_line":""},{"line_number":228,"context_line":"The system includes the following default settings:"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_737022a5","line":225,"updated":"2016-10-20 07:30:55.000000000","message":"Lower case - \"The volume back-end names..\"","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":222,"context_line":"~~~~~~~~~~~~~~~~~~~~~"},{"line_number":223,"context_line":""},{"line_number":224,"context_line":"Once the ``cinder.conf``  has been updated and the cinder volume service has been restarted, cinder commands need to be issued in order to create"},{"line_number":225,"context_line":"and associate OpenStack volume types with the declared ``volume_backend_names``. The Volume back-end names can be any user defined name."},{"line_number":226,"context_line":"For each volume type, you should specify an attribute that will determine if the volume type includes deduplication and/or replication."},{"line_number":227,"context_line":""},{"line_number":228,"context_line":"The system includes the following default settings:"}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_9e03fd41","line":225,"in_reply_to":"fa6399be_737022a5","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10897,"name":"Joseph Robinson","email":"josephremail@gmail.com","username":"RobiJoe"},"change_message_id":"68e64533841d4205f4da85ebfe98b7c10eaea1fc","unresolved":false,"context_lines":[{"line_number":223,"context_line":""},{"line_number":224,"context_line":"Once the ``cinder.conf``  has been updated and the cinder volume service has been restarted, cinder commands need to be issued in order to create"},{"line_number":225,"context_line":"and associate OpenStack volume types with the declared ``volume_backend_names``. The Volume back-end names can be any user defined name."},{"line_number":226,"context_line":"For each volume type, you should specify an attribute that will determine if the volume type includes deduplication and/or replication."},{"line_number":227,"context_line":""},{"line_number":228,"context_line":"The system includes the following default settings:"},{"line_number":229,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_53795e81","line":226,"updated":"2016-10-20 07:30:55.000000000","message":"Switch out the \"and/or\", and  \"..includes deduplication, replication, or both.","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":16258,"name":"nikesh","email":"nike.niec@gmail.com","username":"nikem"},"change_message_id":"f46438c0b1a2241922a509ab4062fe306a7bbf95","unresolved":false,"context_lines":[{"line_number":223,"context_line":""},{"line_number":224,"context_line":"Once the ``cinder.conf``  has been updated and the cinder volume service has been restarted, cinder commands need to be issued in order to create"},{"line_number":225,"context_line":"and associate OpenStack volume types with the declared ``volume_backend_names``. The Volume back-end names can be any user defined name."},{"line_number":226,"context_line":"For each volume type, you should specify an attribute that will determine if the volume type includes deduplication and/or replication."},{"line_number":227,"context_line":""},{"line_number":228,"context_line":"The system includes the following default settings:"},{"line_number":229,"context_line":""}],"source_content_type":"text/x-rst","patch_set":2,"id":"fa6399be_39884b71","line":226,"in_reply_to":"fa6399be_53795e81","updated":"2016-10-20 08:46:40.000000000","message":"Done","commit_id":"b7922d634dd2cb0a2e3ab079d181c3165574b590"},{"author":{"_account_id":10497,"name":"KATO Tomoyuki","email":"kato.tomoyuki@jp.fujitsu.com","username":"to222"},"change_message_id":"290b000c7852a908007a03667d5f05028010d210","unresolved":false,"context_lines":[{"line_number":112,"context_line":"The following table contains the configuration options that are specific"},{"line_number":113,"context_line":"to the Kaminario K2 FC and iSCSI Block Storage drivers."},{"line_number":114,"context_line":""},{"line_number":115,"context_line":".. include:: ../../tables/cinder-kaminario.rst"}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_8aa1f048","side":"PARENT","line":115,"updated":"2016-10-20 11:50:00.000000000","message":"Could you explain why you stop using the configuration options table?","commit_id":"67f64fd5c6c5cf99b7f9508ba997f4dcff322013"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"d4b70cc0ff8114524e0e0b9e5eb91b720d6fef78","unresolved":false,"context_lines":[{"line_number":112,"context_line":"The following table contains the configuration options that are specific"},{"line_number":113,"context_line":"to the Kaminario K2 FC and iSCSI Block Storage drivers."},{"line_number":114,"context_line":""},{"line_number":115,"context_line":".. include:: ../../tables/cinder-kaminario.rst"}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_c56919c0","side":"PARENT","line":115,"range":{"start_line":115,"start_character":1,"end_line":115,"end_character":46},"updated":"2016-10-20 11:57:11.000000000","message":"Just import this table instead of creating your own","commit_id":"67f64fd5c6c5cf99b7f9508ba997f4dcff322013"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"12b7da1ff8ab13d41bc5ca51c618dc8f4916fe5e","unresolved":false,"context_lines":[{"line_number":1,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":2,"context_line":"Kaminario K2 Block Storage Driver  Configuration"},{"line_number":3,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":4,"context_line":""},{"line_number":5,"context_line":"The high performance Kaminario K2 All Flash Array offers Block Storage"}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_a57ee567","line":2,"range":{"start_line":2,"start_character":27,"end_line":2,"end_character":48},"updated":"2016-10-20 11:59:04.000000000","message":"Leave the old title to be consistent - and don\u0027t use title capitalization anywhere.","commit_id":"750ad363e033b1fd3d65da5db0ec02dc7d66ee88"},{"author":{"_account_id":22165,"name":"caoyuan","email":"cao.yingjunz@gmail.com","username":"caoyuan"},"change_message_id":"436d2d9abd0cc6ce0b10afba5841680df4e55183","unresolved":false,"context_lines":[{"line_number":1,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":2,"context_line":"Kaminario K2 Block Storage Driver  Configuration"},{"line_number":3,"context_line":"\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d"},{"line_number":4,"context_line":""},{"line_number":5,"context_line":"The high performance Kaminario K2 All Flash Array offers Block Storage"}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_ad596337","line":2,"range":{"start_line":2,"start_character":30,"end_line":2,"end_character":38},"updated":"2016-10-20 15:58:30.000000000","message":"unnecessary space","commit_id":"750ad363e033b1fd3d65da5db0ec02dc7d66ee88"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"ce09140cd4c0929d4383a067b670345106b970a3","unresolved":false,"context_lines":[{"line_number":67,"context_line":""},{"line_number":68,"context_line":"     $ service nova-compute restart"},{"line_number":69,"context_line":""},{"line_number":70,"context_line":"Supported operations"},{"line_number":71,"context_line":"~~~~~~~~~~~~~~~~~~~~"},{"line_number":72,"context_line":""},{"line_number":73,"context_line":"- Create/Delete/Attach/Detach Volume"},{"line_number":74,"context_line":"- Create/Delete Snapshot"},{"line_number":75,"context_line":"- Create Volume from Snapshot/Image/Clone"},{"line_number":76,"context_line":"- Create Image from Volume"},{"line_number":77,"context_line":"- Volume extend"},{"line_number":78,"context_line":"- Volume retype"},{"line_number":79,"context_line":"- Manage/Un-manage Volume"},{"line_number":80,"context_line":"- Replicate volume to a secondary K2 array."},{"line_number":81,"context_line":""},{"line_number":82,"context_line":"Kaminario K2 Block Storage driver configuration"}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_7fb7f2d7","line":79,"range":{"start_line":70,"start_character":0,"end_line":79,"end_character":25},"updated":"2016-10-20 16:31:57.000000000","message":"we use standard wording, check how other sections do it and copy/paste - but don\u0027t get creative ;)\n\nthe old text used that standard wording, stick with it...","commit_id":"750ad363e033b1fd3d65da5db0ec02dc7d66ee88"},{"author":{"_account_id":6547,"name":"Andreas Jaeger","email":"jaegerandi@gmail.com","username":"jaegerandi"},"change_message_id":"ce09140cd4c0929d4383a067b670345106b970a3","unresolved":false,"context_lines":[{"line_number":230,"context_line":""},{"line_number":231,"context_line":"To configure multiple K2’s:"},{"line_number":232,"context_line":""},{"line_number":233,"context_line":"- Modify the [DEFAULT] section of the cinder.conf file to add an"},{"line_number":234,"context_line":"  enabled_backends parameter specifying the names of back-end system types"},{"line_number":235,"context_line":"  you wish to add, separated by comas. Each back-end system"},{"line_number":236,"context_line":"  should be numbered consecutively."},{"line_number":237,"context_line":""},{"line_number":238,"context_line":"  ``enabled_backends \u003d kaminario-fc1, kaminario-fc2, kaminario-fc3``"},{"line_number":239,"context_line":""},{"line_number":240,"context_line":""},{"line_number":241,"context_line":"- Add a Back-end group section for each back-end you wish to add."}],"source_content_type":"text/x-rst","patch_set":4,"id":"fa6399be_9f7f66df","line":238,"range":{"start_line":233,"start_character":0,"end_line":238,"end_character":68},"updated":"2016-10-20 16:31:57.000000000","message":"Let\u0027s move that content to a generic section - like it\u0027s done for manila at the end of http://docs.openstack.org/newton/config-reference/shared-file-systems/drivers.html","commit_id":"750ad363e033b1fd3d65da5db0ec02dc7d66ee88"}]}