)]}'
{"/PATCHSET_LEVEL":[{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"836e8373592098078bf6b2f527f6da743a6041c9","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":5,"id":"d4ae2510_1bc46d50","updated":"2021-12-14 17:38:19.000000000","message":"-1 pending clarification from Boris S.","commit_id":"a938647af3543dc3c3924310753f0207033bcaad"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"5fdaa20f9ee851a34d714587c0e93f885bc8484c","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":5,"id":"89a5de10_ca6e8e74","updated":"2022-04-14 20:22:07.000000000","message":"1. Please, make sure that this procedure is perfectly legal for all types of deployments (if it is), not just AIO-SX subcloud.\nThis is very vague in the documentation proposal.\n\n2. You have to stress the fact, that user must verify, that PCI ID and capabilities  are absolutely the same.\nA lot of vendors issue the updated HW, with the same model, but with changed IDs and/or capabilities. \nThe onus is on the customer to verify, that it hasn\u0027t changed, otherwise, he\u0027ll not be able to use those instructions and must reinstall.","commit_id":"a938647af3543dc3c3924310753f0207033bcaad"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"69b3bf90fde232d2e873173012ae29e5b4aa1a6e","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":6,"id":"15b28200_3ad7da6d","updated":"2022-04-26 15:55:09.000000000","message":"@Andrea - can you respond to Greg\u0027s open questions in this review? Thanks.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"8ed522e928424232eaa28bb6b75d0384ed98d91a","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":6,"id":"910cbb66_9075f5a0","updated":"2022-04-18 13:56:53.000000000","message":"See note from Boris on April 14 (saved under my name), asking that we test/confirm steps for all deployment scenarios.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":9,"id":"67ce20bf_f98be590","updated":"2022-05-10 14:03:14.000000000","message":"i think I understand better now :-) .... just some minor suggestions.","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"}],"doc/source/node_management/kubernetes/hardware_acceleration_devices/fec-replacement-with-different-vendor-or-device-id-b1ab1440e15f.rst":[{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. note::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":26,"context_line":"    procedure to be done for both types."},{"line_number":27,"context_line":""},{"line_number":28,"context_line":".. rubric:: |prereq|"},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"7768c484_e356cf6b","line":26,"range":{"start_line":26,"start_character":34,"end_line":26,"end_character":39},"updated":"2022-04-25 17:20:21.000000000","message":"? its NIC device and its FEC device ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"69b3bf90fde232d2e873173012ae29e5b4aa1a6e","unresolved":false,"context_lines":[{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. note::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":26,"context_line":"    procedure to be done for both types."},{"line_number":27,"context_line":""},{"line_number":28,"context_line":".. rubric:: |prereq|"},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"518d7999_6393950a","line":26,"range":{"start_line":26,"start_character":34,"end_line":26,"end_character":39},"in_reply_to":"7768c484_e356cf6b","updated":"2022-04-26 15:55:09.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":78,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":79,"context_line":"    8086 and device ID 0d5c."},{"line_number":80,"context_line":""},{"line_number":81,"context_line":"#.  Record the current device configuration."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"    .. code-block::"},{"line_number":84,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"227b11b1_5cf39c34","line":81,"range":{"start_line":81,"start_character":23,"end_line":81,"end_character":43},"updated":"2022-04-25 17:20:21.000000000","message":"device(s) configuration(s).\n// i.e. for the N3000 scenario that has both a 0b30 (NIC device) and 0d8f (FEC device)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"69b3bf90fde232d2e873173012ae29e5b4aa1a6e","unresolved":false,"context_lines":[{"line_number":78,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":79,"context_line":"    8086 and device ID 0d5c."},{"line_number":80,"context_line":""},{"line_number":81,"context_line":"#.  Record the current device configuration."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"    .. code-block::"},{"line_number":84,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"a6f49a12_c25aed74","line":81,"range":{"start_line":81,"start_character":23,"end_line":81,"end_character":43},"in_reply_to":"227b11b1_5cf39c34","updated":"2022-04-26 15:55:09.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":78,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":79,"context_line":"    8086 and device ID 0d5c."},{"line_number":80,"context_line":""},{"line_number":81,"context_line":"#.  Record the current device configuration."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"    .. code-block::"},{"line_number":84,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"33e27300_da578d64","line":81,"range":{"start_line":81,"start_character":23,"end_line":81,"end_character":43},"in_reply_to":"8d0380dd_b5c0e00b","updated":"2022-04-28 14:25:06.000000000","message":"Ack - reverted previous change.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":78,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":79,"context_line":"    8086 and device ID 0d5c."},{"line_number":80,"context_line":""},{"line_number":81,"context_line":"#.  Record the current device configuration."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"    .. code-block::"},{"line_number":84,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"8d0380dd_b5c0e00b","line":81,"range":{"start_line":81,"start_character":23,"end_line":81,"end_character":43},"in_reply_to":"a6f49a12_c25aed74","updated":"2022-04-28 12:49:28.000000000","message":"The NICs have their separate chapter\nAs far as I know, the 0b30 device is the FPGA","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":101,"context_line":"        | driver                | igb_uio                                                                                                 |"},{"line_number":102,"context_line":"        | sriov_vf_driver       | vfio-pci                                                                                                |"},{"line_number":103,"context_line":"        +-----------------------+---------------------------------------------------------------------------------------------------------+"},{"line_number":104,"context_line":""},{"line_number":105,"context_line":""},{"line_number":106,"context_line":"#.  Remove the |VF| configuration, if any, for device 0d8f (N3000) or 0d5c"},{"line_number":107,"context_line":"    (ACC100)."}],"source_content_type":"text/x-rst","patch_set":6,"id":"53f71621_9bb17a19","line":104,"updated":"2022-04-25 17:20:21.000000000","message":"Since this is an N3000 ... shouldn\u0027t you be showing the guy recording the configuration for the NIC device ( as well ?\n\ni.e. pci_0000_b2_00_0 ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":101,"context_line":"        | driver                | igb_uio                                                                                                 |"},{"line_number":102,"context_line":"        | sriov_vf_driver       | vfio-pci                                                                                                |"},{"line_number":103,"context_line":"        +-----------------------+---------------------------------------------------------------------------------------------------------+"},{"line_number":104,"context_line":""},{"line_number":105,"context_line":""},{"line_number":106,"context_line":"#.  Remove the |VF| configuration, if any, for device 0d8f (N3000) or 0d5c"},{"line_number":107,"context_line":"    (ACC100)."}],"source_content_type":"text/x-rst","patch_set":6,"id":"718fb1c8_a92ae5a1","line":104,"in_reply_to":"391eb47a_9e02f818","updated":"2022-04-28 14:25:06.000000000","message":"Ack","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":101,"context_line":"        | driver                | igb_uio                                                                                                 |"},{"line_number":102,"context_line":"        | sriov_vf_driver       | vfio-pci                                                                                                |"},{"line_number":103,"context_line":"        +-----------------------+---------------------------------------------------------------------------------------------------------+"},{"line_number":104,"context_line":""},{"line_number":105,"context_line":""},{"line_number":106,"context_line":"#.  Remove the |VF| configuration, if any, for device 0d8f (N3000) or 0d5c"},{"line_number":107,"context_line":"    (ACC100)."}],"source_content_type":"text/x-rst","patch_set":6,"id":"391eb47a_9e02f818","line":104,"in_reply_to":"53f71621_9bb17a19","updated":"2022-04-28 12:49:28.000000000","message":"As commented the NICs (on N3000 or other cards) have their separate chapter\nThe FPGA (pci_0000_b2_00_0) does not have VF configuration, only 0d8f","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":116,"context_line":"    .. code-block::"},{"line_number":117,"context_line":""},{"line_number":118,"context_line":"       ~(keystone_admin)]$ system host-device-modify \u003chostname\u003e \u003cdevice-name-or-address\u003e --driver none --enable false"},{"line_number":119,"context_line":""},{"line_number":120,"context_line":"#.  Power down the host manually and replace the N3000 or ACC100 |PCI| card."},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"#.  Power up the host."}],"source_content_type":"text/x-rst","patch_set":6,"id":"b2d64374_ee761053","line":119,"updated":"2022-04-25 17:20:21.000000000","message":"For this example of the N3000 ... the above two steps have dealt wit the 0d8f FEC DEVICE ... is the same two steps to be done for the 0b30 NIC device ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":116,"context_line":"    .. code-block::"},{"line_number":117,"context_line":""},{"line_number":118,"context_line":"       ~(keystone_admin)]$ system host-device-modify \u003chostname\u003e \u003cdevice-name-or-address\u003e --driver none --enable false"},{"line_number":119,"context_line":""},{"line_number":120,"context_line":"#.  Power down the host manually and replace the N3000 or ACC100 |PCI| card."},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"#.  Power up the host."}],"source_content_type":"text/x-rst","patch_set":6,"id":"e6b98afc_81ffc73c","line":119,"in_reply_to":"b2d64374_ee761053","updated":"2022-04-28 14:25:06.000000000","message":"Ack","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":121,"context_line":""},{"line_number":122,"context_line":"#.  Power up the host."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"#.  Check the new device."},{"line_number":125,"context_line":""},{"line_number":126,"context_line":"    .. code-block::"},{"line_number":127,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"eb7f9705_00864d65","line":124,"range":{"start_line":124,"start_character":18,"end_line":124,"end_character":24},"updated":"2022-04-25 17:20:21.000000000","message":"device(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"69b3bf90fde232d2e873173012ae29e5b4aa1a6e","unresolved":false,"context_lines":[{"line_number":121,"context_line":""},{"line_number":122,"context_line":"#.  Power up the host."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"#.  Check the new device."},{"line_number":125,"context_line":""},{"line_number":126,"context_line":"    .. code-block::"},{"line_number":127,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"190c7a58_c01a4b04","line":124,"range":{"start_line":124,"start_character":18,"end_line":124,"end_character":24},"in_reply_to":"eb7f9705_00864d65","updated":"2022-04-26 15:55:09.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":127,"context_line":""},{"line_number":128,"context_line":"       ~(keystone_admin)]$ system host-device-list \u003chostname\u003e"},{"line_number":129,"context_line":""},{"line_number":130,"context_line":"#.  Reconfigure the device 0d8f (N3000) or 0d5c (ACC100)."},{"line_number":131,"context_line":""},{"line_number":132,"context_line":"    The new device\u0027s number of |VFs| is limited by the parameter"},{"line_number":133,"context_line":"    ``sriov_totalvfs``."}],"source_content_type":"text/x-rst","patch_set":6,"id":"c384f5fa_e6df3b14","line":130,"range":{"start_line":130,"start_character":27,"end_line":130,"end_character":39},"updated":"2022-04-25 17:20:21.000000000","message":"what about the N3000 NIC device (0b30) ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":127,"context_line":""},{"line_number":128,"context_line":"       ~(keystone_admin)]$ system host-device-list \u003chostname\u003e"},{"line_number":129,"context_line":""},{"line_number":130,"context_line":"#.  Reconfigure the device 0d8f (N3000) or 0d5c (ACC100)."},{"line_number":131,"context_line":""},{"line_number":132,"context_line":"    The new device\u0027s number of |VFs| is limited by the parameter"},{"line_number":133,"context_line":"    ``sriov_totalvfs``."}],"source_content_type":"text/x-rst","patch_set":6,"id":"f9fe4c83_051ef37a","line":130,"range":{"start_line":130,"start_character":27,"end_line":130,"end_character":39},"in_reply_to":"c384f5fa_e6df3b14","updated":"2022-04-28 12:49:28.000000000","message":"Those are the configurable devices (to set drivers and number of VF)\n0b30 is the FPGA which requires image upload\n\nThere is this step below in the text:\n#.  If the replaced |PCI| card is an N3000 and its |FPGA| was not\n    pre-loaded with an updated image, follow the steps described in\n    :ref:`index-intel-n3000-support`.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":127,"context_line":""},{"line_number":128,"context_line":"       ~(keystone_admin)]$ system host-device-list \u003chostname\u003e"},{"line_number":129,"context_line":""},{"line_number":130,"context_line":"#.  Reconfigure the device 0d8f (N3000) or 0d5c (ACC100)."},{"line_number":131,"context_line":""},{"line_number":132,"context_line":"    The new device\u0027s number of |VFs| is limited by the parameter"},{"line_number":133,"context_line":"    ``sriov_totalvfs``."}],"source_content_type":"text/x-rst","patch_set":6,"id":"34645de8_481fe23f","line":130,"range":{"start_line":130,"start_character":27,"end_line":130,"end_character":39},"in_reply_to":"f9fe4c83_051ef37a","updated":"2022-04-28 14:25:06.000000000","message":"Ack - reverting text to ACC100 only.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"641c4a7405eabda33021f3dff5c3a76b128bb873","unresolved":true,"context_lines":[{"line_number":22,"context_line":"and adding in configuration for the new device."},{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. note::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":26,"context_line":"    procedure to be done for both its NIC device and its FEC device."},{"line_number":27,"context_line":""},{"line_number":28,"context_line":".. rubric:: |prereq|"},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":8,"id":"dbedcf19_80abc14e","line":26,"range":{"start_line":25,"start_character":0,"end_line":26,"end_character":68},"updated":"2022-05-02 16:36:58.000000000","message":"Andre ?\nI\u0027m confused.\n\nFor the procedure of replacing an N3000 with a different vendor and device id, is the procedure below required for both the N3000 NIC device and the N3000 FEC device ?\n\n... because I think you\u0027re saying in comments below that it is not required for the FEC device ?","commit_id":"c42e7a020b509ce650bd4480541fec0ae7355e29"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"2aaf2787a1326119f2b908e7d72e177e5ad71407","unresolved":false,"context_lines":[{"line_number":22,"context_line":"and adding in configuration for the new device."},{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. note::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":26,"context_line":"    procedure to be done for both its NIC device and its FEC device."},{"line_number":27,"context_line":""},{"line_number":28,"context_line":".. rubric:: |prereq|"},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":8,"id":"b2c0a04d_cba14e3d","line":26,"range":{"start_line":25,"start_character":0,"end_line":26,"end_character":68},"in_reply_to":"174f72ee_ff5715d3","updated":"2022-05-03 18:40:31.000000000","message":"Done","commit_id":"c42e7a020b509ce650bd4480541fec0ae7355e29"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"c366d061f95cb38c071be65fd5819112bdb3777a","unresolved":true,"context_lines":[{"line_number":22,"context_line":"and adding in configuration for the new device."},{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. note::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":26,"context_line":"    procedure to be done for both its NIC device and its FEC device."},{"line_number":27,"context_line":""},{"line_number":28,"context_line":".. rubric:: |prereq|"},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":8,"id":"174f72ee_ff5715d3","line":26,"range":{"start_line":25,"start_character":0,"end_line":26,"end_character":68},"in_reply_to":"dbedcf19_80abc14e","updated":"2022-05-03 15:14:53.000000000","message":"What the note is warning us (or at least trying to) is that the N3000 comes with both the NIC and the FEC and if the operator only executes the FEC procedure and not the NIC procedure as well he might have problems with the network side\n\nPerhaps a text like the following:\nThe N3000 card comes with both NIC and |FEC| functionality and if the operator only executes this |FEC| procedure, without executing the equivalent one for the NIC, it might end up not having the network configuration matching the new card","commit_id":"c42e7a020b509ce650bd4480541fec0ae7355e29"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":true,"context_lines":[{"line_number":7,"context_line":""},{"line_number":8,"context_line":".. rubric:: |context|"},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"The following procedure allows the replacement of an N3000 or ACC100 device on"},{"line_number":11,"context_line":"a host, without requiring a host or system (in case of |AIO-SX|) re-install and"},{"line_number":12,"context_line":"re-configuration, in the case of the replaced device having different vendor or"},{"line_number":13,"context_line":"device ID information."}],"source_content_type":"text/x-rst","patch_set":9,"id":"78e9d58a_53b43205","line":10,"range":{"start_line":10,"start_character":69,"end_line":10,"end_character":76},"updated":"2022-05-10 14:03:14.000000000","message":"? should we say \u0027FEC device\u0027 ? since this procedure is specifically for the FEC ?","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"52ee2f972e4785fcc9a9dd683a9d704c9adc5c3c","unresolved":false,"context_lines":[{"line_number":7,"context_line":""},{"line_number":8,"context_line":".. rubric:: |context|"},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"The following procedure allows the replacement of an N3000 or ACC100 device on"},{"line_number":11,"context_line":"a host, without requiring a host or system (in case of |AIO-SX|) re-install and"},{"line_number":12,"context_line":"re-configuration, in the case of the replaced device having different vendor or"},{"line_number":13,"context_line":"device ID information."}],"source_content_type":"text/x-rst","patch_set":9,"id":"eb84d26f_e45e498a","line":10,"range":{"start_line":10,"start_character":69,"end_line":10,"end_character":76},"in_reply_to":"78e9d58a_53b43205","updated":"2022-05-11 10:56:03.000000000","message":"Done","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":true,"context_lines":[{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. warning::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality. If you complete"},{"line_number":26,"context_line":"    this |FEC| procedure without executing the equivalent NIC procedure, the"},{"line_number":27,"context_line":"    resulting network configuration may not match the new card, resulting in"},{"line_number":28,"context_line":"    service interuptions."},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"2fa2d6b9_61759173","line":26,"range":{"start_line":26,"start_character":33,"end_line":26,"end_character":71},"updated":"2022-05-10 14:03:14.000000000","message":"where is \"the equivalent NIC procedure\" documented ?\nshould we reference it here ?","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"52ee2f972e4785fcc9a9dd683a9d704c9adc5c3c","unresolved":false,"context_lines":[{"line_number":23,"context_line":""},{"line_number":24,"context_line":".. warning::"},{"line_number":25,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality. If you complete"},{"line_number":26,"context_line":"    this |FEC| procedure without executing the equivalent NIC procedure, the"},{"line_number":27,"context_line":"    resulting network configuration may not match the new card, resulting in"},{"line_number":28,"context_line":"    service interuptions."},{"line_number":29,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"ed4d584e_b4d498e7","line":26,"range":{"start_line":26,"start_character":33,"end_line":26,"end_character":71},"in_reply_to":"2fa2d6b9_61759173","updated":"2022-05-11 10:56:03.000000000","message":"Done","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":true,"context_lines":[{"line_number":80,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":81,"context_line":"    8086 and device ID 0d5c."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"#.  Record the current device configuration for the N3000 scenario that"},{"line_number":84,"context_line":"    involves both a 0b30 (NIC device) and 0d8f (FEC device)"},{"line_number":85,"context_line":""},{"line_number":86,"context_line":"    .. code-block::"},{"line_number":87,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"b23ba68e_c8499f88","line":84,"range":{"start_line":83,"start_character":4,"end_line":84,"end_character":59},"updated":"2022-05-10 14:03:14.000000000","message":"So shouldn\u0027t we be rewording this as:\n\n\n#. Record the current FEC device configuration; as shown below for the N3000 scenario with its FEC device 0x0d8f","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"52ee2f972e4785fcc9a9dd683a9d704c9adc5c3c","unresolved":false,"context_lines":[{"line_number":80,"context_line":"    N3000 has vendor ID 8086 and device IDs 0b30 and 0d8f. ACC100 has vendor ID"},{"line_number":81,"context_line":"    8086 and device ID 0d5c."},{"line_number":82,"context_line":""},{"line_number":83,"context_line":"#.  Record the current device configuration for the N3000 scenario that"},{"line_number":84,"context_line":"    involves both a 0b30 (NIC device) and 0d8f (FEC device)"},{"line_number":85,"context_line":""},{"line_number":86,"context_line":"    .. code-block::"},{"line_number":87,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"b500b400_59c51336","line":84,"range":{"start_line":83,"start_character":4,"end_line":84,"end_character":59},"in_reply_to":"b23ba68e_c8499f88","updated":"2022-05-11 10:56:03.000000000","message":"Done","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":true,"context_lines":[{"line_number":124,"context_line":""},{"line_number":125,"context_line":"#.  Power up the host."},{"line_number":126,"context_line":""},{"line_number":127,"context_line":"#.  Check the new device(s)."},{"line_number":128,"context_line":""},{"line_number":129,"context_line":"    .. code-block::"},{"line_number":130,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"1cc1e6cf_f2ae83a8","line":127,"range":{"start_line":127,"start_character":24,"end_line":127,"end_character":27},"updated":"2022-05-10 14:03:14.000000000","message":"i would just say \u0027device\u0027 now","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"52ee2f972e4785fcc9a9dd683a9d704c9adc5c3c","unresolved":false,"context_lines":[{"line_number":124,"context_line":""},{"line_number":125,"context_line":"#.  Power up the host."},{"line_number":126,"context_line":""},{"line_number":127,"context_line":"#.  Check the new device(s)."},{"line_number":128,"context_line":""},{"line_number":129,"context_line":"    .. code-block::"},{"line_number":130,"context_line":""}],"source_content_type":"text/x-rst","patch_set":9,"id":"90ebe966_214d8bbd","line":127,"range":{"start_line":127,"start_character":24,"end_line":127,"end_character":27},"in_reply_to":"1cc1e6cf_f2ae83a8","updated":"2022-05-11 10:56:03.000000000","message":"Done","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"e10b5c8f0a2c2f9f7b2320b115a855ca5988b1dc","unresolved":true,"context_lines":[{"line_number":130,"context_line":""},{"line_number":131,"context_line":"       ~(keystone_admin)]$ system host-device-list \u003chostname\u003e"},{"line_number":132,"context_line":""},{"line_number":133,"context_line":"#.  Reconfigure the 0d5c (ACC100) device."},{"line_number":134,"context_line":""},{"line_number":135,"context_line":"    The new device\u0027s number of |VFs| is limited by the parameter"},{"line_number":136,"context_line":"    ``sriov_totalvfs``."}],"source_content_type":"text/x-rst","patch_set":9,"id":"7ad1446f_6482bf46","line":133,"range":{"start_line":133,"start_character":20,"end_line":133,"end_character":41},"updated":"2022-05-10 14:03:14.000000000","message":"I would put it back to what it was:\n\n#. Reconfigure the device 0d8f (N3000) or 0d5c (ACC100)","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"52ee2f972e4785fcc9a9dd683a9d704c9adc5c3c","unresolved":false,"context_lines":[{"line_number":130,"context_line":""},{"line_number":131,"context_line":"       ~(keystone_admin)]$ system host-device-list \u003chostname\u003e"},{"line_number":132,"context_line":""},{"line_number":133,"context_line":"#.  Reconfigure the 0d5c (ACC100) device."},{"line_number":134,"context_line":""},{"line_number":135,"context_line":"    The new device\u0027s number of |VFs| is limited by the parameter"},{"line_number":136,"context_line":"    ``sriov_totalvfs``."}],"source_content_type":"text/x-rst","patch_set":9,"id":"06221143_ff0568c6","line":133,"range":{"start_line":133,"start_character":20,"end_line":133,"end_character":41},"in_reply_to":"7ad1446f_6482bf46","updated":"2022-05-11 10:56:03.000000000","message":"Done","commit_id":"9b3e6d8f0a04c82c6da4e51e84beba805f49fc7b"}],"doc/source/node_management/kubernetes/hardware_acceleration_devices/n3000-and-acc100-replacement-with-the-same-vendor-and-device-id-cccabcdc5d43.rst":[{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":14,"context_line":"host-delete``, a ``system host-add`` (re-install) and a re-configure of the"},{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."}],"source_content_type":"text/x-rst","patch_set":6,"id":"6108009d_292855c6","line":17,"updated":"2022-04-25 17:20:21.000000000","message":"Do you need a paragraph something like what you have in the NIC REPLACEMENT WITH SAME VENDOR AND DEVICE ID ?\ne.g.\n\nSince this procedure reuses same vendor and device ID information and\ncapabilities, the interface\u0027s new |MAC| will be updated internally and no\nreconfiguration is required. Assuming that the replacement will occur on\nthe same |PCI| slot of the previous card, the procedure can be executed for all\ntypes of NIC classes (``pci-sriov``, ``data``, ``pci-passthrough``, and\n``platform``).\n\n... but re-worded for these hw acceleration devices","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":14,"context_line":"host-delete``, a ``system host-add`` (re-install) and a re-configure of the"},{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."}],"source_content_type":"text/x-rst","patch_set":6,"id":"70873ced_29b1e8ae","line":17,"in_reply_to":"4db52549_ffca4682","updated":"2022-04-28 14:25:06.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":14,"context_line":"host-delete``, a ``system host-add`` (re-install) and a re-configure of the"},{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."}],"source_content_type":"text/x-rst","patch_set":6,"id":"4db52549_ffca4682","line":17,"in_reply_to":"6108009d_292855c6","updated":"2022-04-28 12:49:28.000000000","message":"I suggest:\n\nSince this procedure reuses the same vendor and device ID information and\ncapabilities, the current |FEC| device database will be used internally, and no\nreconfiguration is required. Assuming that the replacement will occur on\nthe same |PCI| slot of the previous card.","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."},{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"932e0f05_751b7607","line":20,"range":{"start_line":18,"start_character":0,"end_line":20,"end_character":40},"updated":"2022-04-25 17:20:21.000000000","message":"REMOVE?  ... since you don\u0027t need to do any device-specific commands ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."},{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"eb98a4ff_4b411fcb","line":20,"range":{"start_line":18,"start_character":0,"end_line":20,"end_character":40},"in_reply_to":"932e0f05_751b7607","updated":"2022-04-28 12:49:28.000000000","message":"agree","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":15,"context_line":"host. In the case of an |AIO-SX| deployment, with only one host, this would"},{"line_number":16,"context_line":"result in a full system re-install and full system re-configuration."},{"line_number":17,"context_line":""},{"line_number":18,"context_line":".. note::"},{"line_number":19,"context_line":"    The N3000 card comes with both NIC and |FEC| functionality and requires the"},{"line_number":20,"context_line":"    procedure to be done for both types."},{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"9b527af3_21f73cd1","line":20,"range":{"start_line":18,"start_character":0,"end_line":20,"end_character":40},"in_reply_to":"eb98a4ff_4b411fcb","updated":"2022-04-28 14:25:06.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""},{"line_number":24,"context_line":"The vendor and device-id of currently installed |PCI| card can be obtained"},{"line_number":25,"context_line":"with:"},{"line_number":26,"context_line":""},{"line_number":27,"context_line":".. code-block:: none"},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"   (keystone_admin)]# system host-port-show \u003chostname\u003e port-name"},{"line_number":30,"context_line":"   (keystone_admin)]# system host-device-list \u003chostname\u003e"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"For information on replacing an N3000 or ACC100 with a different model, see"},{"line_number":33,"context_line":":ref:`fec-replacement-with-different-vendor-or-device-id-b1ab1440e15f`."}],"source_content_type":"text/x-rst","patch_set":6,"id":"4ed2dc4b_5352e89d","line":30,"range":{"start_line":24,"start_character":0,"end_line":30,"end_character":56},"updated":"2022-04-25 17:20:21.000000000","message":"REMOVE?  ... since you don\u0027t need to do any device-specific commands ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""},{"line_number":24,"context_line":"The vendor and device-id of currently installed |PCI| card can be obtained"},{"line_number":25,"context_line":"with:"},{"line_number":26,"context_line":""},{"line_number":27,"context_line":".. code-block:: none"},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"   (keystone_admin)]# system host-port-show \u003chostname\u003e port-name"},{"line_number":30,"context_line":"   (keystone_admin)]# system host-device-list \u003chostname\u003e"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"For information on replacing an N3000 or ACC100 with a different model, see"},{"line_number":33,"context_line":":ref:`fec-replacement-with-different-vendor-or-device-id-b1ab1440e15f`."}],"source_content_type":"text/x-rst","patch_set":6,"id":"f629e512_f99b07c5","line":30,"range":{"start_line":24,"start_character":0,"end_line":30,"end_character":56},"in_reply_to":"4ed2dc4b_5352e89d","updated":"2022-04-28 12:49:28.000000000","message":"I think we could keep, my idea was that the operator at list do a basic check to verify the device is on the desired host\n\nBut we can remove, no objections from my side","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":21,"context_line":""},{"line_number":22,"context_line":".. rubric:: |prereq|"},{"line_number":23,"context_line":""},{"line_number":24,"context_line":"The vendor and device-id of currently installed |PCI| card can be obtained"},{"line_number":25,"context_line":"with:"},{"line_number":26,"context_line":""},{"line_number":27,"context_line":".. code-block:: none"},{"line_number":28,"context_line":""},{"line_number":29,"context_line":"   (keystone_admin)]# system host-port-show \u003chostname\u003e port-name"},{"line_number":30,"context_line":"   (keystone_admin)]# system host-device-list \u003chostname\u003e"},{"line_number":31,"context_line":""},{"line_number":32,"context_line":"For information on replacing an N3000 or ACC100 with a different model, see"},{"line_number":33,"context_line":":ref:`fec-replacement-with-different-vendor-or-device-id-b1ab1440e15f`."}],"source_content_type":"text/x-rst","patch_set":6,"id":"89f2a248_60d9354f","line":30,"range":{"start_line":24,"start_character":0,"end_line":30,"end_character":56},"in_reply_to":"f629e512_f99b07c5","updated":"2022-04-28 14:25:06.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":48,"context_line":"    .. code-block:: none"},{"line_number":49,"context_line":""},{"line_number":50,"context_line":"        ~(keystone_admin)]$ system host-lock \u003chostname\u003e"},{"line_number":51,"context_line":""},{"line_number":52,"context_line":"#.  Power down the host manually and make the N3000 or ACC100 card replacement."},{"line_number":53,"context_line":""},{"line_number":54,"context_line":"#.  Power up the host."}],"source_content_type":"text/x-rst","patch_set":6,"id":"a0d296e8_f981d915","line":51,"updated":"2022-04-25 17:20:21.000000000","message":"No requirement to do any \u0027system host-device-modify ... \" commands required here ?","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"dcb8aed167a63b58b20a29cc71fd05310b25ae93","unresolved":false,"context_lines":[{"line_number":48,"context_line":"    .. code-block:: none"},{"line_number":49,"context_line":""},{"line_number":50,"context_line":"        ~(keystone_admin)]$ system host-lock \u003chostname\u003e"},{"line_number":51,"context_line":""},{"line_number":52,"context_line":"#.  Power down the host manually and make the N3000 or ACC100 card replacement."},{"line_number":53,"context_line":""},{"line_number":54,"context_line":"#.  Power up the host."}],"source_content_type":"text/x-rst","patch_set":6,"id":"6920c55a_031bd564","line":51,"in_reply_to":"11a2725d_daa02337","updated":"2022-04-28 14:25:06.000000000","message":"Ack","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":32933,"name":"Andre Kantek","display_name":"Andre Kantek","email":"AndreFernandoZanella.Kantek@windriver.com","username":"akantek"},"change_message_id":"3184b1f45c6451a337f649e2a8a182bebc0b1bca","unresolved":true,"context_lines":[{"line_number":48,"context_line":"    .. code-block:: none"},{"line_number":49,"context_line":""},{"line_number":50,"context_line":"        ~(keystone_admin)]$ system host-lock \u003chostname\u003e"},{"line_number":51,"context_line":""},{"line_number":52,"context_line":"#.  Power down the host manually and make the N3000 or ACC100 card replacement."},{"line_number":53,"context_line":""},{"line_number":54,"context_line":"#.  Power up the host."}],"source_content_type":"text/x-rst","patch_set":6,"id":"11a2725d_daa02337","line":51,"in_reply_to":"a0d296e8_f981d915","updated":"2022-04-28 12:49:28.000000000","message":"No, the database already has the correct number of VFs and drivers to be used on the device","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"}],"doc/source/node_management/kubernetes/node_interfaces/replace-a-nic-with-a-different-vendor-or-device-id-b406c1c190a9.rst":[{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":94,"context_line":"       +--------------+----------+----------+--------------+--------+-----------+-------------+-------------------------------------------------------+"},{"line_number":95,"context_line":""},{"line_number":96,"context_line":""},{"line_number":97,"context_line":"    #. Record the current port configuration."},{"line_number":98,"context_line":""},{"line_number":99,"context_line":"       .. code-block:: none"},{"line_number":100,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"c642f2c6_84c7af0c","line":97,"range":{"start_line":97,"start_character":26,"end_line":97,"end_character":44},"updated":"2022-04-25 17:20:21.000000000","message":"port(s) configuration(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":94,"context_line":"       +--------------+----------+----------+--------------+--------+-----------+-------------+-------------------------------------------------------+"},{"line_number":95,"context_line":""},{"line_number":96,"context_line":""},{"line_number":97,"context_line":"    #. Record the current port configuration."},{"line_number":98,"context_line":""},{"line_number":99,"context_line":"       .. code-block:: none"},{"line_number":100,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"5d9bbf14_bd80d6f4","line":97,"range":{"start_line":97,"start_character":26,"end_line":97,"end_character":44},"in_reply_to":"c642f2c6_84c7af0c","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":100,"context_line":""},{"line_number":101,"context_line":"          ~(keystone_admin)]$ system host-port-show \u003chostname\u003e \u003caffected-port-name\u003e"},{"line_number":102,"context_line":""},{"line_number":103,"context_line":"#.  Identify the interfaces that are using the port."},{"line_number":104,"context_line":""},{"line_number":105,"context_line":"    .. code-block:: none"},{"line_number":106,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"0db882fa_f6d366a4","line":103,"range":{"start_line":103,"start_character":47,"end_line":103,"end_character":51},"updated":"2022-04-25 17:20:21.000000000","message":"port(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":100,"context_line":""},{"line_number":101,"context_line":"          ~(keystone_admin)]$ system host-port-show \u003chostname\u003e \u003caffected-port-name\u003e"},{"line_number":102,"context_line":""},{"line_number":103,"context_line":"#.  Identify the interfaces that are using the port."},{"line_number":104,"context_line":""},{"line_number":105,"context_line":"    .. code-block:: none"},{"line_number":106,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"5895b450_45b68254","line":103,"range":{"start_line":103,"start_character":47,"end_line":103,"end_character":51},"in_reply_to":"0db882fa_f6d366a4","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":119,"context_line":"       +--------------+----------+-----------------+----------+---------+---------------+---------------+-------------------------+------------+"},{"line_number":120,"context_line":""},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"    #. Select the interface associated with the port to be replaced."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"       #. Check the column :guilabel:`used by i/f` to get the list of dependent"},{"line_number":125,"context_line":"          interfaces (sub-interfaces) on the port."}],"source_content_type":"text/x-rst","patch_set":6,"id":"cf12a475_622f8712","line":122,"range":{"start_line":122,"start_character":18,"end_line":122,"end_character":28},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":119,"context_line":"       +--------------+----------+-----------------+----------+---------+---------------+---------------+-------------------------+------------+"},{"line_number":120,"context_line":""},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"    #. Select the interface associated with the port to be replaced."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"       #. Check the column :guilabel:`used by i/f` to get the list of dependent"},{"line_number":125,"context_line":"          interfaces (sub-interfaces) on the port."}],"source_content_type":"text/x-rst","patch_set":6,"id":"15365c88_8419ad34","line":122,"range":{"start_line":122,"start_character":48,"end_line":122,"end_character":53},"updated":"2022-04-25 17:20:21.000000000","message":"port(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":119,"context_line":"       +--------------+----------+-----------------+----------+---------+---------------+---------------+-------------------------+------------+"},{"line_number":120,"context_line":""},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"    #. Select the interface associated with the port to be replaced."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"       #. Check the column :guilabel:`used by i/f` to get the list of dependent"},{"line_number":125,"context_line":"          interfaces (sub-interfaces) on the port."}],"source_content_type":"text/x-rst","patch_set":6,"id":"a52e703c_07839a57","line":122,"range":{"start_line":122,"start_character":48,"end_line":122,"end_character":53},"in_reply_to":"15365c88_8419ad34","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":119,"context_line":"       +--------------+----------+-----------------+----------+---------+---------------+---------------+-------------------------+------------+"},{"line_number":120,"context_line":""},{"line_number":121,"context_line":""},{"line_number":122,"context_line":"    #. Select the interface associated with the port to be replaced."},{"line_number":123,"context_line":""},{"line_number":124,"context_line":"       #. Check the column :guilabel:`used by i/f` to get the list of dependent"},{"line_number":125,"context_line":"          interfaces (sub-interfaces) on the port."}],"source_content_type":"text/x-rst","patch_set":6,"id":"76fe159d_f0811215","line":122,"range":{"start_line":122,"start_character":18,"end_line":122,"end_character":28},"in_reply_to":"cf12a475_622f8712","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":194,"context_line":""},{"line_number":195,"context_line":"         ~(keystone_admin)]$ system interface-datanetwork-remove \u003cuuid\u003e"},{"line_number":196,"context_line":""},{"line_number":197,"context_line":"    Remove the sub-interface."},{"line_number":198,"context_line":""},{"line_number":199,"context_line":"    .. code-block:: none"},{"line_number":200,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"6372de1d_54e8b1a3","line":197,"range":{"start_line":197,"start_character":19,"end_line":197,"end_character":28},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":194,"context_line":""},{"line_number":195,"context_line":"         ~(keystone_admin)]$ system interface-datanetwork-remove \u003cuuid\u003e"},{"line_number":196,"context_line":""},{"line_number":197,"context_line":"    Remove the sub-interface."},{"line_number":198,"context_line":""},{"line_number":199,"context_line":"    .. code-block:: none"},{"line_number":200,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"8db1cc23_9207f1f0","line":197,"range":{"start_line":197,"start_character":19,"end_line":197,"end_character":28},"in_reply_to":"6372de1d_54e8b1a3","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":237,"context_line":""},{"line_number":238,"context_line":"#.  Power up the host."},{"line_number":239,"context_line":""},{"line_number":240,"context_line":"#.  After rebooting, check the new port\u0027s inventoried data:"},{"line_number":241,"context_line":""},{"line_number":242,"context_line":"    .. code-block::"},{"line_number":243,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"e78e0978_c8c9034e","line":240,"range":{"start_line":240,"start_character":35,"end_line":240,"end_character":41},"updated":"2022-04-25 17:20:21.000000000","message":"port(s)\u0027","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":237,"context_line":""},{"line_number":238,"context_line":"#.  Power up the host."},{"line_number":239,"context_line":""},{"line_number":240,"context_line":"#.  After rebooting, check the new port\u0027s inventoried data:"},{"line_number":241,"context_line":""},{"line_number":242,"context_line":"    .. code-block::"},{"line_number":243,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"35de74e5_aa522d5d","line":240,"range":{"start_line":240,"start_character":35,"end_line":240,"end_character":41},"in_reply_to":"e78e0978_c8c9034e","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":247,"context_line":"    The old interface will no longer be available, replaced by a new one with"},{"line_number":248,"context_line":"    the same name assigned to the new port."},{"line_number":249,"context_line":""},{"line_number":250,"context_line":"#.  Reconfigure the base interface associated with the port."},{"line_number":251,"context_line":""},{"line_number":252,"context_line":"    .. note::"},{"line_number":253,"context_line":"       It is recommended that you reuse the previous interface names."}],"source_content_type":"text/x-rst","patch_set":6,"id":"68439893_95f6c98e","line":250,"range":{"start_line":250,"start_character":55,"end_line":250,"end_character":59},"updated":"2022-04-25 17:20:21.000000000","message":"port(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":247,"context_line":"    The old interface will no longer be available, replaced by a new one with"},{"line_number":248,"context_line":"    the same name assigned to the new port."},{"line_number":249,"context_line":""},{"line_number":250,"context_line":"#.  Reconfigure the base interface associated with the port."},{"line_number":251,"context_line":""},{"line_number":252,"context_line":"    .. note::"},{"line_number":253,"context_line":"       It is recommended that you reuse the previous interface names."}],"source_content_type":"text/x-rst","patch_set":6,"id":"3ee9ae1f_0d7ac343","line":250,"range":{"start_line":250,"start_character":55,"end_line":250,"end_character":59},"in_reply_to":"68439893_95f6c98e","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":271,"context_line":""},{"line_number":272,"context_line":"          ~(keystone_admin)]$ system host-if-modify \u003chostname\u003e \u003cifname\u003e -c \u003cclass\u003e -n \u003cprevious-configured-name\u003e \u003cprevious-interface-parameters\u003e"},{"line_number":273,"context_line":""},{"line_number":274,"context_line":"#.  Reconnect the interface to any previously connected network."},{"line_number":275,"context_line":""},{"line_number":276,"context_line":"    #. For a platform class interface, select the respective network that"},{"line_number":277,"context_line":"       supports the desired new interface."}],"source_content_type":"text/x-rst","patch_set":6,"id":"07b085e2_9351361c","line":274,"range":{"start_line":274,"start_character":18,"end_line":274,"end_character":28},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":271,"context_line":""},{"line_number":272,"context_line":"          ~(keystone_admin)]$ system host-if-modify \u003chostname\u003e \u003cifname\u003e -c \u003cclass\u003e -n \u003cprevious-configured-name\u003e \u003cprevious-interface-parameters\u003e"},{"line_number":273,"context_line":""},{"line_number":274,"context_line":"#.  Reconnect the interface to any previously connected network."},{"line_number":275,"context_line":""},{"line_number":276,"context_line":"    #. For a platform class interface, select the respective network that"},{"line_number":277,"context_line":"       supports the desired new interface."}],"source_content_type":"text/x-rst","patch_set":6,"id":"b3a84415_4c734b3e","line":274,"range":{"start_line":274,"start_character":18,"end_line":274,"end_character":28},"in_reply_to":"07b085e2_9351361c","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":290,"context_line":"          ~(keystone_admin)]$ system datanetwork-list"},{"line_number":291,"context_line":"          ~(keystone_admin)]$ system interface-datanetwork-assign \u003chostname\u003e \u003cifname-or-uuid\u003e \u003cdatanetwork-name-or-uuid\u003e"},{"line_number":292,"context_line":""},{"line_number":293,"context_line":"#.  Add the necessary sub-interfaces."},{"line_number":294,"context_line":""},{"line_number":295,"context_line":"    #. Recreate all necessary sub-interfaces that existed prior to the NIC"},{"line_number":296,"context_line":"       replacement."}],"source_content_type":"text/x-rst","patch_set":6,"id":"bb29d04d_6ea657ef","line":293,"range":{"start_line":293,"start_character":26,"end_line":293,"end_character":36},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":290,"context_line":"          ~(keystone_admin)]$ system datanetwork-list"},{"line_number":291,"context_line":"          ~(keystone_admin)]$ system interface-datanetwork-assign \u003chostname\u003e \u003cifname-or-uuid\u003e \u003cdatanetwork-name-or-uuid\u003e"},{"line_number":292,"context_line":""},{"line_number":293,"context_line":"#.  Add the necessary sub-interfaces."},{"line_number":294,"context_line":""},{"line_number":295,"context_line":"    #. Recreate all necessary sub-interfaces that existed prior to the NIC"},{"line_number":296,"context_line":"       replacement."}],"source_content_type":"text/x-rst","patch_set":6,"id":"91d1ded9_c1c04443","line":293,"range":{"start_line":293,"start_character":26,"end_line":293,"end_character":36},"in_reply_to":"bb29d04d_6ea657ef","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":302,"context_line":"          ~(keystone_admin)]$ system host-if-add \u003chostname\u003e \u003cprevious-sub-interface-name\u003e \u003ciftype [ae,vlan,vf,ethernet]\u003e \u003cinterface-name\u003e \u003cprevious-parameters\u003e"},{"line_number":303,"context_line":""},{"line_number":304,"context_line":""},{"line_number":305,"context_line":"#.  Reconnect the sub-interface with the desired network (if it was previously"},{"line_number":306,"context_line":"    connected)."},{"line_number":307,"context_line":""},{"line_number":308,"context_line":"    #. For a platform class interface, select the respective network that"}],"source_content_type":"text/x-rst","patch_set":6,"id":"bcf5ae1b_a8885229","line":305,"range":{"start_line":305,"start_character":22,"end_line":305,"end_character":32},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":302,"context_line":"          ~(keystone_admin)]$ system host-if-add \u003chostname\u003e \u003cprevious-sub-interface-name\u003e \u003ciftype [ae,vlan,vf,ethernet]\u003e \u003cinterface-name\u003e \u003cprevious-parameters\u003e"},{"line_number":303,"context_line":""},{"line_number":304,"context_line":""},{"line_number":305,"context_line":"#.  Reconnect the sub-interface with the desired network (if it was previously"},{"line_number":306,"context_line":"    connected)."},{"line_number":307,"context_line":""},{"line_number":308,"context_line":"    #. For a platform class interface, select the respective network that"}],"source_content_type":"text/x-rst","patch_set":6,"id":"7454d904_de56f73c","line":305,"range":{"start_line":305,"start_character":22,"end_line":305,"end_character":32},"in_reply_to":"bcf5ae1b_a8885229","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":329,"context_line":"       ~(keystone_admin)]$ system host-addr-list \u003chostname\u003e"},{"line_number":330,"context_line":"       ~(keystone_admin)]$ system host-route-list \u003chostname\u003e"},{"line_number":331,"context_line":""},{"line_number":332,"context_line":"#.  Recreate static addresses and routes using the affected interfaces or"},{"line_number":333,"context_line":"    sub-interfaces."},{"line_number":334,"context_line":""},{"line_number":335,"context_line":"    .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":6,"id":"2bd765c2_fd03c956","line":332,"range":{"start_line":332,"start_character":60,"end_line":332,"end_character":71},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":329,"context_line":"       ~(keystone_admin)]$ system host-addr-list \u003chostname\u003e"},{"line_number":330,"context_line":"       ~(keystone_admin)]$ system host-route-list \u003chostname\u003e"},{"line_number":331,"context_line":""},{"line_number":332,"context_line":"#.  Recreate static addresses and routes using the affected interfaces or"},{"line_number":333,"context_line":"    sub-interfaces."},{"line_number":334,"context_line":""},{"line_number":335,"context_line":"    .. code-block:: none"}],"source_content_type":"text/x-rst","patch_set":6,"id":"8524138b_dbe7b7d8","line":332,"range":{"start_line":332,"start_character":60,"end_line":332,"end_character":71},"in_reply_to":"2bd765c2_fd03c956","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":26026,"name":"Greg Waines","email":"greg.waines@windriver.com","username":"gwaines"},"change_message_id":"cc7099ed1d577cde294dd1aff8873a76dc9447c8","unresolved":true,"context_lines":[{"line_number":330,"context_line":"       ~(keystone_admin)]$ system host-route-list \u003chostname\u003e"},{"line_number":331,"context_line":""},{"line_number":332,"context_line":"#.  Recreate static addresses and routes using the affected interfaces or"},{"line_number":333,"context_line":"    sub-interfaces."},{"line_number":334,"context_line":""},{"line_number":335,"context_line":"    .. code-block:: none"},{"line_number":336,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"be62dd52_7d30eb0a","line":333,"range":{"start_line":333,"start_character":8,"end_line":333,"end_character":18},"updated":"2022-04-25 17:20:21.000000000","message":"interface(s)","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"},{"author":{"_account_id":30539,"name":"Ron Stone","email":"ronald.stone@windriver.com","username":"ronstone2000"},"change_message_id":"a521d6bc8406ba09d6cc981715a8f8d75ff4b4ef","unresolved":false,"context_lines":[{"line_number":330,"context_line":"       ~(keystone_admin)]$ system host-route-list \u003chostname\u003e"},{"line_number":331,"context_line":""},{"line_number":332,"context_line":"#.  Recreate static addresses and routes using the affected interfaces or"},{"line_number":333,"context_line":"    sub-interfaces."},{"line_number":334,"context_line":""},{"line_number":335,"context_line":"    .. code-block:: none"},{"line_number":336,"context_line":""}],"source_content_type":"text/x-rst","patch_set":6,"id":"73759f20_e4bd485c","line":333,"range":{"start_line":333,"start_character":8,"end_line":333,"end_character":18},"in_reply_to":"be62dd52_7d30eb0a","updated":"2022-04-26 16:04:31.000000000","message":"Done","commit_id":"6d8148e5b9d4ae6ec623b2b03e77d4dbc48e693b"}]}